WooshBuild v3.01- Zgemma 2S + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1

[danlou]

Well that looks ok to me, is that after pressing blue button and looking at mount from there, have you just for shits and giggles tried to unmount it and then initialise again, I don't have a zgemma with me I just set them up for people, did you also reboot like Wooshman said


Sent from my iPad using Tapatalk

When I try to unmount I get the following error message as shown in attachment.

This box has had more reboots than a Superman movie franchise! I'm going to reinitialize USB stick, reboot and see what happens.

Sent from my Vodafone Smart ultra 6 using Tapatalk

 

[matieboy]

The swap file will be using it


Sent from my iPhone using Tapatalk

 

[danlou]

Well that looks ok to me, is that after pressing blue button and looking at mount from there, have you just for shits and giggles tried to unmount it and then initialise again, I don't have a zgemma with me I just set them up for people, did you also reboot like Wooshman said


Sent from my iPad using Tapatalk

When I try to unmount I get the following error message as shown in attachment.

This box has had more reboots than a Superman movie franchise! I'm going to reinitialize USB stick, reboot and see what happens.

Sent from my Vodafone Smart ultra 6 using Tapatalk

I can't even initialise it as it says busy! Will reformat it in PC and see what happens

Sent from my Vodafone Smart ultra 6 using Tapatalk

 

[wooshman]

To be honest I am lost with trying to work out what the problem actually is.

If you removed the usb from the front when the box was off and put it in the back then turned on it will have initialised and created like you have, then you restart the box. Then you do the Flash online part of the setup.
Blue button -> flash online / local -> Online (green button) -> WooshBuild -> Green button to flash.

At what point doing the above does it tell you there is not enough space please? Can you do another one of you small (sarcasm) screen shots please?

 

[danlou]

To be honest I am lost with trying to work out what the problem actually is.

If you removed the usb from the front when the box was off and put it in the back then turned on it will have initialised and created like you have, then you restart the box. Then you do the Flash online part of the setup.
Blue button -> flash online / local -> Online (green button) -> WooshBuild -> Green button to flash.

At what point doing the above does it tell you there is not enough space please? Can you do another one of you small (sarcasm) screen shots please?

Lol, blame my phone. I take the photo and then automatically upload it via Tapatalk.

The error message comes up when I try to do flash on the fly and press green button for Online.

Sent from my Vodafone Smart ultra 6 using Tapatalk

 

[wooshman]

And you have restarted the box after you initialised and created swap file?
Then tried to download? There is no other device in the box?

I think you may need another stick to try I am afraid as this one is slowly beating me.

 

[danlou]

And you have restarted the box after you initialised and created swap file?
Then tried to download? There is no other device in the box?

I think you may need another stick to try I am afraid as this one is slowly beating me.

Yes I have even take USB from rear to front of box and initialised and recreated swap file , still no joy.

Going to start again from scratch one more time.
Thanks for all responses, greatly appreciated .

Sent from my Vodafone Smart ultra 6 using Tapatalk

 

[wooshman]

[video=youtube;zW8D9m7xYdM]https://www.youtube.com/watch?v=zW8D9m7xYdM&feature=youtu.be&t=19s[/video]
Go on, I know you are dying to click it !

 

[danlou]

Reflashed and still same error. Tried a different brand of USB stick which I know is working fine but no joy. It must be me then or my box
I'm going to try openvix and see what happens ....
Thanks for responses ...

Sent from my Vodafone Smart ultra 6 using Tapatalk

 

[wooshman]

I would flash BaseBuild again danlou as something isn't right. Use one stick for BaseBuild flash and the other as your main USB.

Not meaning to be patronising in any way (get me and a big word) follow the instructions again word for word. I know you have been through them and now know what you are doing, but follow them anyway just in case :-)

Vix? pah !

 

[danlou]

I would flash BaseBuild again danlou as something isn't right. Use one stick for BaseBuild flash and the other as your main USB.

Not meaning to be patronising in any way (get me and a big word) follow the instructions again word for word. I know you have been through them and now know what you are doing, but follow them anyway just in case :-)

Vix? pah !

Thanks wooshman, yes i am frustrated as don't know why it doesn't work. For some reason I just can't get on with OpenATV - I would really prefer it to make it the default build on zgemma because of its auto update capability.

alas I have applied openvix and it went straight on without issue grr. Will revisit ATV again when i have time to dabble. Thanks again.

 

[Jason6416]

I usually use Oscam but I have a nline how will it work

 

[wooshman]

I usually use Oscam but I have a nline how will it work

The instructions cover everything you need to get your line going with the build including its own plugin to make it easier. I could be wrong but having an nline is having a nline, Ocam is the software used to load it. My terminology could be wrong though.

Anyway, at the end of the day, follow the instructions in post #1 and your nline will work like the few people who have used this build before you.

Reading pays dividends.

 

[kieran77]

Hi woosh
When originally getting this build the n line never actually worked on here i tried both mgcamd 1.35 and mgcamd1.83r
in the end i gave up and went to the C line on Cam 2.3.0 but after it freezing too much im attempting to give the n line a try again and still no luck.. where am i going wrong??

thanks

 

[matieboy]

@kieiran at the beginning of your n line did you change it to CWS =
( deleting the n and replacing )


Sent from my iPhone using Tapatalk

 

[kieran77]

@matieboy - yes pal,
CWS = (it goes like this) 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1 it worked just fine on vix with mgcamd 1.35 and 1.38 but since having woosh they dont seem to work i have to use ccam with a n: line ?

 

[matieboy]

Those numbers are usually at the end of the line, is that how you have it, think is server address first, then port , user


Sent from my iPhone using Tapatalk

 

[wooshman]

Those numbers are usually at the end of the line, is that how you have it, think is server address first, then port , user


Sent from my iPhone using Tapatalk

Yeah I am a bit puzzled by this too. Your line issue though isn't a vanilla WooshBuild issue though.

 

[wooshman]

hi, it's mounted as ext4

And when you try to flash online it tells you don't have enough space? Once initialised did you restart the box? I would think you did.

This is what I have when I have mounted , pic attached

Sent from my Vodafone Smart ultra 6 using Tapatalk

I know how to fix this now:

The box has decided to refer to your usb device as something other than media/hdd

Go into mount manager and change the type to hdd

I know how to fix it because the 2S in the kitchen did it to me last night. Took me a while to spot it, but that is the solution.

 

[edengreen]

Hi Wooshman Just sorting my HDD out to try and remove my USB and configure the 500gb HDD as you have told me , I would like to back up my current settings before I start is there a link how to do this and where does the file save to? Also can I use this to update my mums box to the same settings as mine so that I only have to add her CLine?

your help or anybody elses help would be greatfully received as Im delighted with this skin and dont want to bugger it up!!