WooshBuild v3.00 + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1

[frankcunion]

Wooshman thanks so much for the build. Got it installed and up an running in half an hour. First time doing all this myself. Usually got someone to set up all for me me. It's night and day difference between this an my old amiko alien box. And most of that is down to your flash. Thanks again

 

[wooshman]

hi
is it possible to flash base build on h2h and update on line i read 3.01 will be ok where is this image thanks

---------- Post Merged at 11:34 PM ----------

Hi
where is this image v3.01 image for the H2H now available

If you use the H2S instructions, download basebuild etc, when you come to flash online you will see a H2H image is available on the list of downloads, select and use that. Then continue with the instructions pretty much.

At the bottom are some addition H2H instructions done by Thomaskieron for WooshBuild H2H which explain how to add VM etc

---------- Post Merged at 09:26 AM ----------

just wanna make sure im entering my details correctly:

C: speed5411.server.org 18000 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

from the line above i would replace the speed5411.server.org with the server details given to me, then the 18000 with the port given, username with the one provided and then pass 01 - 14 with the password provided?

For your line (being a C line), ensure in softcam panel that CCCam 2.3.0 is selected and press the green button to restart the cam. Try Sky 1, if it doesn't work, your line details are incorrect or another issue, maybe get a 24hour test line from the request thread?

---------- Post Merged at 09:29 AM ----------

Hello may have missed it these pages if so I apologise. I just followed all these and it went perfectly

But I'm trying add a c line and an n line to the Softcam set up and I cant upload more than one they overwrite is there a facility to manually add them ?

Or what have I done wrong ?

Whole new build from scratch today latest full woosh, v good.

You can add both lines to cccam.cfg and the use the importer. There are a lot of posts for "2 lines" which should come up in a search, but that is how I would do it.

 

[chuckn]

noob here, wanting to download but it wont let me :( bad times

 

[jonnyb3]

Excellent guide wooshman hatsoff

my first go at re-flashing a Zgemma h2s and it all went smooth thanks to your super easy to follow instructions above.

 

[chuckn]

got the download!

awesome guide, very simple to follow, thanks ! :)

 

[readychef]

Wooshman your a genius...... Thanks so much for all your patience and hard work. Absolutely brilliant !!!....

I followed the guild to a tee and everything worked perfectly. Step 7 was difficult (for some reason) . I was setting this receiver up for a friend in their house yesterday and could not get the line to work.

Took it home and sorted it out. Read the guild over again and bang sorted. Now the problem I have is I need to delete my N: line and put theirs on. Anybody know how I can delete my line on the Zgemma h2s receiver.


Cheers lads.....

 

[Oli1983uk]

---------- Post Merged at 09:26 AM ----------

just wanna make sure im entering my details correctly:

C: speed5411.server.org 18000 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

from the line above i would replace the speed5411.server.org with the server details given to me, then the 18000 with the port given, username with the one provided and then pass 01 - 14 with the password provided?

For your line (being a C line), ensure in softcam panel that CCCam 2.3.0 is selected and press the green button to restart the cam. Try Sky 1, if it doesn't work, your line details are incorrect or another issue, maybe get a 24hour test line from the request thread?

Thanks, All sorted now. After a few attempts last night the box stopped being able to find the .list file, I had to go into reg edit on Windows 10 and delete the file association with note pad and when editing the file tell windows to open it with notepad but not set that as default tried it again and it worked fine.

 

[wooshman]

Now the problem I have is I need to delete my N: line and put theirs on. Anybody know how I can delete my line on the Zgemma h2s receiver.
Cheers lads.....

Put their line in the file as you did for yours, then chuck it on USB, into the box and run the USB Cam importer, it will overwrite the existing one.

 

[readychef]

Put their line in the file as you did for yours, then chuck it on USB, into the box and run the USB Cam importer, it will overwrite the existing one.

Ahhh Thanks again Wooshman .... As a newbie this build is just amazing !!!!!

 

[rossdundee]

Have just set up my box using the wooshman build quite easy to do for a first timer like myself so thanks to Wooshman and all who contributed, have added a line and am up and running. Only slight problem I have is when I press on the EPG button on remote I get the tabs etc but I cannot seem to be able to use any tab except the first one which is the 28.2E UK Bouquets, how do I change this so I can scroll along the tabs at the top for quicker access to other categories, hope you understand my problem, thanks in advance ( i did scroll through this thread to see if it had been asked before but could not see anything )

 

[dsayers2014]

press next and previous between 0

 

[rossdundee]

moving tabs

Thanks very much for your reply and help, working fine now

rossdundee

 

[m000min]

Good job!

 

[SkipDonoghue]

Remote not responding I have 3x h2s all running latest Wooshbuild 1not responding and stuck on one channel won't change with different remote tried reboot of router and box but will not respond ant one any clue what's going on....other 2 boxes fine

 

[waqasahmed]

Massive thanks for your guide!
Just out of interest, and yes Im aware this says "Don't ask for help on FTP" but I've actually done this thing, as per the guide (ie: loaded the file on to the USB), but I was at a loss, where on Earth this sits on the box if not "var/keys/cccam.cfg" ? As when I went to edit that, the test line I have put is not there?

Note, I'm not asking for FTP help. As I'm a network engineer, this is out of pure curiosity. I know it works, but I want to know why this works? And where on Earth the lines went to

There's a mental void. It works..somehow, but I'm not sure how

 

[phartmaster]

Massive thanks for your guide!
Just out of interest, and yes Im aware this says "Don't ask for help on FTP" but I've actually done this thing, as per the guide (ie: loaded the file on to the USB), but I was at a loss, where on Earth this sits on the box if not "var/keys/cccam.cfg" ? As when I went to edit that, the test line I have put is not there?

Note, I'm not asking for FTP help. As I'm a network engineer, this is out of pure curiosity. I know it works, but I want to know why this works? And where on Earth the lines went to

There's a mental void. It works..somehow, but I'm not sure how

/usr/keys

 

[waqasahmed]

Massive thanks for your guide!
Just out of interest, and yes Im aware this says "Don't ask for help on FTP" but I've actually done this thing, as per the guide (ie: loaded the file on to the USB), but I was at a loss, where on Earth this sits on the box if not "var/keys/cccam.cfg" ? As when I went to edit that, the test line I have put is not there?

Note, I'm not asking for FTP help. As I'm a network engineer, this is out of pure curiosity. I know it works, but I want to know why this works? And where on Earth the lines went to

There's a mental void. It works..somehow, but I'm not sure how

/usr/keys

var/keys gets you to /usr/keys as "keys" is in a shortcut

Any how, I logged on today, and whilst before it still had the line saying "# Please enter your line here" or something like that, in the morning it has the actual lines written to the config. I have noticed however, that I get to see the ACTUAL lines, if I log in with username root, password root, but if I don't specify a password, I don't get to see the cline. How odd!

SO from my own findings:

Log in with U: root, P: <BLANK> Port: 21 (FTP)
Go to usr/keys/cccam.cfg or /var/keys/cccam.cfg
Edit the file
No clines show

Log in with U: root, P: root, Port: 21 (FTP)
Go to usr/keys/cccam.cfg or /var/keys/cccam.cfg
Edit the file
Clines show up

 

[Flub2004]

A massive thanks Wooshman. Flashed from an alternative image to 3.03. Very easy to follow instructions. A few tweaks here and there on Autobouquets and CrossEPG to a more suitable time slot and Picons installed - and its up and running great. I have noticed the remote control "seems" slightly less responsive to what I am used to (more akin to the old zgemma S2 I sold on), but its liveable with. Cheers

 

[wooshman]

A massive thanks Wooshman. Flashed from an alternative image to 3.03. Very easy to follow instructions. A few tweaks here and there on Autobouquets and CrossEPG to a more suitable time slot and Picons installed - and its up and running great. I have noticed the remote control "seems" slightly less responsive to what I am used to (more akin to the old zgemma S2 I sold on), but its liveable with. Cheers

Not sure why your remote is sluggish, I hate the 2S as it is so slow, it lives in the cardboard box until is must come out for a WooshBuild update, then it goes away again

 

[alane20]

Wooshman, just updated to 3.03, again as with all previous versions, a genuine thank you for putting in the work and making it freely available to all, keep up the good work it is appricated