Get the Best IPTV Service
Triax multiblock lnb holder | Page 6 | Techkings
What's new
By:
Filters

Triax multiblock lnb holder

Installation number2 similar to my Installation
Except i used a traix satellite dish and tacomate
.With the main satellite dish high up .I was able
To recieve s.n.r on 4.8 east .I never installed l.n.b
For it .The s.n.r on 19,13,28 was high with no drop out on any channels
 
I've tried the collar the other way-was worse. SoI put it back.
Also swapping the lnbs around , and the collars on the other lnbs too.

Not giving up I'll try again
 
weimaraner95 said:
I've tried the collar the other way-was worse. SoI put it back.
Also swapping the lnbs around , and the collars on the other lnbs too.

Not giving up I'll try again
Click to expand...
Due to the bar being bent, if the collar is moved the other way around, then you should have the 13e lnb angled in further aswell as it being able to move closer to 19.2E lnb. But as you have a bullet lnb in the centre it might be that you need to move the 13E lnb away from 19.2E when the collar is the other way around.
 
I'll give anything a try , I would have thought the other bullet I got would have allowed me to get Closer or further away if needs be to 19.2 However it didn't the GM appears to be a better lnb.
 
weimaraner95 said:
I'll give anything a try , I would have thought the other bullet I got would have allowed me to get Closer or further away if needs be to 19.2 However it didn't the GM appears to be a better lnb.
Click to expand...
Don't forget the head on a bullet lnb is much much smaller than a normal lnb, therefore the signal it can see is less.
 
weimaraner95 said:
Thanks in what way totally wrong , that's a different dish.
I was going off cokeaddicts setup
What do you suggest
Click to expand...
does not matter if different dish look at the bracket yours is curved towards the dish linesmans is curved downwards i think that is what he means.
 
His maybe not too sure , and yeah I need to follow an Arc but I can't fit the bracket and collars another way on the zone 2 , looking at coke addicts pics his angles towards too,

Unless my eyes are are deceiving me.

I'd say my pic I need to offset the bracket more left , but It would still facing dish and not downwards
 
Have you got traix satellite dish
Its ideal for the t.d series bracket
So you can fit the multisat bracket up the correct
Way .Then all the focal points will be correct
 
This satellite dish is ideal for the t.d series bracket
 

Attachments

  • 17219055913966163586478138141332.jpg
    17219055913966163586478138141332.jpg
    2.6 MB · Views: 15
Thanks guys , yeah it's a hobby and it's turning into a right challenge. But it's definitely doable, that's one I've seen with them cheap brackets , didn't work for me when I tried yrs ago ,
1000002625.png
As far as looking at the technomate bar it can't be placed to face downwards, you tilt to track the arc , so am still intrigued to why my whole installation is wrong when it's been done this way before.
 
Nothing to do with the sattelite dish size
The t.d series multisat bracket is better designed to fit the t.d series sattelite dish
 
Hi mate so it's better and obviously designed for a TD dish , but I got the impression that I'd made a whole **** up in the installation process. So nothing to do with the way the bar is fitted , as drox possibly thought.

Other than using this on a zone 2 is that what you meant by whole installation is wrong
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup