Once you have the multisat bracket fitted
And the first l.n.b holder and l.n.b which is your
Prime focus l.n.b 19 east .Dont fit the other l.n.bs
Incase you get interference from the other l.n.bs
Also make sure the bracket is tilted correctly
Then adjust the azimuth angle and elevation angle of the satellite dish until you receive the
Maximum s.n.r on the transponder 19 east.Then
Tighten the clamps holding the satellite dish
On your bracket .Tighten them diagonally leaving the same amount of thread protruding
To keep your satellite dish square. Then
Tighten the elevation bolts off the dish.Then
Slide the l.n.b holder l.n.b along the multisat
Bracket for 28.2E until you receive s.n.r on
28.2E. You might have to adjust the tilt of
The bracket and skew angle of the l.n.b
To receive the maximum s.n.r Then repeat
The process for the other l.n.bs. One you have
Recieved maximum s.n.r on all the transponders
Tighten the l.n.b holders in place and secure the
Bracket
And the first l.n.b holder and l.n.b which is your
Prime focus l.n.b 19 east .Dont fit the other l.n.bs
Incase you get interference from the other l.n.bs
Also make sure the bracket is tilted correctly
Then adjust the azimuth angle and elevation angle of the satellite dish until you receive the
Maximum s.n.r on the transponder 19 east.Then
Tighten the clamps holding the satellite dish
On your bracket .Tighten them diagonally leaving the same amount of thread protruding
To keep your satellite dish square. Then
Tighten the elevation bolts off the dish.Then
Slide the l.n.b holder l.n.b along the multisat
Bracket for 28.2E until you receive s.n.r on
28.2E. You might have to adjust the tilt of
The bracket and skew angle of the l.n.b
To receive the maximum s.n.r Then repeat
The process for the other l.n.bs. One you have
Recieved maximum s.n.r on all the transponders
Tighten the l.n.b holders in place and secure the
Bracket