I have had the blue circle and freeze up.
I generally record to a network drive and use a USB in the back for the epg and swap file, so there isn't a great deal of data moving back and forth to the USB and so speed shouldn't be a big factor.
Also happens mainly when doing the auto records.
Was using a Sandisk Ultra Fit 32gb (USB2.0) - have changed it to a newer version of the same USB but a 64gb 3.0 and getting the same results.
Will try turning time shift off and see if that makes a difference although its a neat feature that I don't really want to lose.
Odd thing is I didn't get it on the original v1 build though, only since updating to 3.02.
Perhaps when Woosh is comfortable with the latest open atv it might cure this and other random (non build related) bugs, I might get brave and try to create my own version but I know it woudl be cr@p compared LOL
I would say give it a go Rich and see if you can solve the problem or reproduce it with a new build of your own. Easy to do, just time consuming, but when you are only doing it for yourself it it much easier.
Use Kiddac's guide, it is where I started.
---------- Post Merged at 02:18 PM ----------
Hi guys I'm a newbie and looking for some advice. I've downloaded this excellent build but am stuck on step 7. All the fta channels are working fine and the time shift and recording are working perfect. I've tried 4 separate test clines and nlines and still can't get any sky/bt channels to view. I followed the instructions and selected Sky 1, used the USB in the front of the box, pressed the green button and used the USB CAM Importer. The message comes up saying:-
# put your CWS = details below this line #
CWS = (then my line details)
Your newcamd.list file, displayed above, has been copied successfully. mgcam has automatically started.
Press exit to leave plugin
I've then pressed exit and still no SKY channels are available. I've gone in the softcam panel to check and next to Select cam 1 (using the right button on the remote) it gives me the following options:-
oscam_atv 1.2 11214 / scam 3.60 / Wicardd 1.18 / evocamd_2.17 / newcs_1.67rc1 / Oscam DeppOnMod / doscam v 0.25 / no cam
I've spent about 15 hours on this now and am really stuck. I've read loads of forum guides and watched videos on youtube using Filezilla etc but to no avail. As I said I've tried about 4 different test lines now so know its me doing something wrong.
Any help would be great as I really love the record and timeshift on this box. My mate at work has a £35 openbox and he could just type in 6666 and enter the cline manually, much to his amusement :(
Cheers lads
It will be you who has the final laugh when you box is streaming with IPTV player an
d looking like sky+ not to mention auto updating the EPG and Channel lists.
Right to put it bluntly what the hell are you looking at or what have you done to your box?
oscam_atv 1.2 11214 / scam 3.60 / Wicardd 1.18 / evocamd_2.17 / newcs_1.67rc1 / Oscam DeppOnMod / doscam v 0.25 / no cam
These have never been installed on WooshBuild, so unless you went installing a load of cams and removing others I don't know what you have done. The only cams installed are cccam 2.3.0 and mgcamd 1.38r1 and you don't have those in your list.... I think you have been playing :-) Your box, play all your like.
Easiest thing to do it another flash of WooshBuild. Providing you followed the instructions for BaseBuild, you will be able to press the blue button -> flash online / local -> Yellow (Online) select WooshBuild 3.02 H2S and Green button to flash. You have nothing to lose at the moment.
Alternatively you can just add mgcamd 1.38r1 cam from the install list and select that in softcam panel - may work
---------- Post Merged at 02:20 PM ----------
Hi Wooshman great build by the way, not sure what I have done but I have a zgemma h2h box, I installed the 3.01v for h2s on it from scratch, then updated it through your build to the h2h version. It does not have auto bouquets e2 on it neither, and every time I press the menu button on my remote to setup the sat dish and other things it keeps crashing and coming with sorry it has crashed we need to re-boot the box. Do I need to start from the 3.00 version or do I go back further to your other firmware versions to start from scratch for my h2h box? Cheers Bonesy
There is a v3.01 for the H2H. It was built on the H2S box but has everything needed to run both Sly and VM. Additional instructions were done by ThomasKieron for the H2H and he tested the build too.
