WooshBuild v3.00 + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1

[Collyb5060]

If you keep pressing the down button they are on the 5/6th screen ?
How many screens are you seeing ?

Have you loaded the latest basebuild version V3.01 and then flashed online to update ?

I've 8 screens. I downloaded basebuild 3.0 as per 1st page on this thread although when i went to system information, its says update version 16 March 2016? Should i flash again with 3.01?

 

[benijofar]

If you haven't put the latest build on after 16/3/16 then put that version on first.
Don't forget to do a full backup and settings first so that you can miss out some of the stages.
You can then flash the latest image uploaded last night.

 

[Collyb5060]

If you haven't put the latest build on after 16/3/16 then put that version on first.
Don't forget to do a full backup and settings first so that you can miss out some of the stages.
You can then flash the latest image uploaded last night.

Flashed the Wooshbuild V3.01 but still have the same with the picons! I'll not get too annoyed over this but thanks for your help anyhow.

 

[benijofar]

If you haven't put the latest build on after 16/3/16 then put that version on first.
Don't forget to do a full backup and settings first so that you can miss out some of the stages.
You can then flash the latest image uploaded last night.

Flashed the Wooshbuild V3.01 but still have the same with the picons! I'll not get too annoyed over this but thanks for your help anyhow.

If you have 8 screens for picons then the correct one is there ?
It starts openatv-black 13e
Next page has a load of snp=full folders ?
Next page same.
Next page halfway down the srp files start ?
Next page all srp files ?
Next page and fifth one down ?

 

[Collyb5060]

If you haven't put the latest build on after 16/3/16 then put that version on first.
Don't forget to do a full backup and settings first so that you can miss out some of the stages.
You can then flash the latest image uploaded last night.

Flashed the Wooshbuild V3.01 but still have the same with the picons! I'll not get too annoyed over this but thanks for your help anyhow.

Yese first page starts with openatv-black13e, second page starts with opneatv-white23e, bottom of second page tv-east-013.0, third page starts tv-east-016.0 and so on...

 

[benijofar]

Are you running in Openatv at this point or inside Wooshbuild ?
I haven't seen those settings on picons anywhere ?

 

[wooshman]

Here is your answer. I already took the time to make sure everyone could add picons with my normal standard of instructions
Adding Picons to WooshBuild

It is just a case of reading a thread through from the start.

 

[Collyb5060]

Are you running in Openatv at this point or inside Wooshbuild ?
I haven't seen those settings on picons anywhere ?

Wooshbuid 3.01

 

[benijofar]

Are you running in Openatv at this point or inside Wooshbuild ?
I haven't seen those settings on picons anywhere ?

Wooshbuid 3.01

Read Woosh's post above !
You haven't followed the post and done the feed button which adds the correct picon list on !

 

[Peopeers]

Hi there how do I go about changing the timers so my box doesn't update the channels at 4am an can my down to a working tv anyone ? Cheers Mick

 

[wooshman]

Hi there how do I go about changing the timers so my box doesn't update the channels at 4am an can my down to a working tv anyone ? Cheers Mick

Change the update time in AutoBouquet E2
Change the update time in CrossEPG

As for the "an can my down to a working tv anyone ", if you mean stop TV waking up chanage the HDMI CEC settings to suit your needs.

HDMI CEC Settings - scroll down the first post until you get the the HDMI CEC bit.

 

[instig8]

Hi there, great build, had it working straight away. However I have a problem. Not all of the channel info is loading on the EPG, just showing blanks, but when I am on the channel I can press OK to view whats on and the episode info. Probably a setting somewhere I have messed with. Please help if you can.

Thanks in advance

 

[wooshman]

Hi there, great build, had it working straight away. However I have a problem. Not all of the channel info is loading on the EPG, just showing blanks, but when I am on the channel I can press OK to view whats on and the episode info. Probably a setting somewhere I have messed with. Please help if you can.

Thanks in advance

Press your Green Button -> Highlight CrossEPG Downloader -> Press OK

See if that fixes your issue

 

[instig8]

Thanks for the quick reply woosh! I will try that when I am home and report back. Great build BTW :)

Hi there, great build, had it working straight away. However I have a problem. Not all of the channel info is loading on the EPG, just showing blanks, but when I am on the channel I can press OK to view whats on and the episode info. Probably a setting somewhere I have messed with. Please help if you can.

Thanks in advance

Press your Green Button -> Highlight CrossEPG Downloader -> Press OK

See if that fixes your issue

 

[boobishabang]

Thanks for the quick reply woosh! I will try that when I am home and report back. Great build BTW :)

Hi there, great build, had it working straight away. However I have a problem. Not all of the channel info is loading on the EPG, just showing blanks, but when I am on the channel I can press OK to view whats on and the episode info. Probably a setting somewhere I have messed with. Please help if you can.

Thanks in advance

Press your Green Button -> Highlight CrossEPG Downloader -> Press OK

See if that fixes your issue

Certain Channels (Sky1, Atlantic, Living) at certain times of the day (around 7pm-12am) have and will have blank programme information, the program name will be in the EPG but no program info, this seems to be a bug using CrossEPG 0.6.2

 

[king132]

Im surprised with the amount of issues some people are having with this image. The Instructions are quite clear and to intsall the image from start to finish took me 10-15 mins. Loved the ability to add the c or n line by just having the file on the USB and having the plugin pick it up.

Very good image Wooshman - thanks for your time and effort putting it together.

I noticed that cacheflush was already installed when i was looking through the installed plugins. Its not on the plugins list though. Is there a way to unhide the plugin?

 

[richyboy]

downloading now - thank you!

 

[sn0wman1]

How do you delete or hide tabs in autobouquets e2. Such as religion and others that I don't ever use?. I could do it in autobouquet maker but not in e2. Thanks..

 

[Kitchy]

I can't believe how easy you have made it to set up a zgemma h2s box, thankyou. I did have a go at creating an image myself with the help of kiddacs set up guide but I was not totally happy with it that is why I decided to try this build and so glad I did. Works like a charm.

The only issue I have is that I cant get my newcamd line to work as I am told it is more stable. My CCcam line works ok. I have installed the line correctly but the box fails to identify it. I have also tried adding a mg_cfg file which my provider supplied but still no joy. Any suggestions?

 

[king132]

The only issue I have is that I cant get my newcamd line to work as I am told it is more stable. My CCcam line works ok. I have installed the line correctly but the box fails to identify it. I have also tried adding a mg_cfg file which my provider supplied but still no joy. Any suggestions?

Are you using the newcamd.list file that came with the image and does the beginning of your line start with: CWS = when you open up the file?