Get the Best IPTV Service
WooshBuild v3.00 + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1 | Page 61 | Techkings
What's new
By:
Filters

WooshBuild v3.00 + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1

Status
Not open for further replies.
wooshman said:
I am not really sure what to say then as this is my standard EPG from a fresh WooshBuild flash.

View attachment 17604

Sky Atlantic & Sky Living are sometimes blank, but I did read this was down to CrossEPG.
Click to expand...
Yesterday I reflashed 3.03, added picons to display on epg, reset epg update to 7.45am and now just found more not displaying ie sky 1 right now
e567363ca9d869fc46fca191df6ad203.jpg

To eliminate picon add I have just changed to display without picons and re downlodwd cross epg and no difference
 
Last edited:
hi does anyone know to fix epq issue, box has been on since new update, but none of data loads only around 4 channels or the ones which i watch,the rest which are not clicked on/watched dont show any egg data? thanks
 
Green button/autobouquets e2/green button and let it run
Then run the crossepg downloader as well.
They should all come back then.
 
BogRat said:
wooshman said:
I am not really sure what to say then as this is my standard EPG from a fresh WooshBuild flash.

View attachment 17604

Sky Atlantic & Sky Living are sometimes blank, but I did read this was down to CrossEPG.
Click to expand...
Yesterday I reflashed 3.03, added picons to display on epg, reset epg update to 7.45am and now just found more not displaying ie sky 1 right now
To eliminate picon add I have just changed to display without picons and re downlodwd cross epg and no difference
Click to expand...

TO be honest I can't see what is wrong with that? Please don't send a bigger picture though, that one was large enough.

What are you saying is wrong with it?

I remember now it is your description for the programs.

Settings, you have changed something or have you reflashed? to fix it? The fact that you have turned picons on in the EPG points towards other settings being changed. Sorry, but it isn;t a standard problem in WooshBuild.
 
Last edited:
I just looked at my guide and I don't have any program descriptions on sky 1 in the EPG but I scrolled along and the descriptions are there after 1am tomorrow. Interestingly if I put sky 1 on and press info the right program info is there but its not showing up in the epg
 
djgarf said:
I just looked at my guide and I don't have any program descriptions on sky 1 in the EPG but I scrolled along and the descriptions are there after 1am tomorrow. Interestingly if I put sky 1 on and press info the right program info is there but its not showing up in the epg
Click to expand...

Which in that case BogRat I take it all back and eat humble pie and say I am sorry for saying you have been messing.

It will be part of the problem with CrossEPG then because as far as I know xmltv-import does not have this problem. Install it and see then you can decide if you want to keep CrossEPG or xmltv-import.

It is in the plugins section but not covered by this thread.
 
benijofar said:
Green button/autobouquets e2/green button and let it run
Then run the crossepg downloader as well.
They should all come back then.
Click to expand...

Still no luck mate, my boquets goes to terminal and starts to download then update and then restarts but nothing happens? Also ran cross epq and that worked however didn't fix the epg issue
 
I've just tried CrossEPG which didn't populate descriptions for Sky1 and Atlantic, then tried XMLTV importer which did, so obviously an issue with CrossEPG
 
8pm until 1am there is no program desciption for SKY 1, Sky living Sky Atlantic.

If anyone could confirm this happens or doesn't happen with xmltv-importer please.

---------- Post Merged at 10:44 PM ----------

Willo3092 said:
I've just tried CrossEPG which didn't populate descriptions for Sky1 and Atlantic, then tried XMLTV importer which did, so obviously an issue with CrossEPG
Click to expand...
Thanks Willo for the feedback.

It is the same time every day with the same 3 channels.

I can;t say I have ever noticed before in the 4 months of using CrossEPG. Much faster than xmltv-import though so it will remain :-)

---------- Post Merged at 10:47 PM ----------

Bainze, your EPG is just seriously broken I am afraid. Do you do EPG updates?

Having that many missing program listings on your EPG means it is not working properly. Do you let CrossEPG update daily? If not I would do a manual scan now.

Green button -> CrossEPG

Your problem is not the bug that has been raised by BogRat although taking a picture and videoing the screen maybe related in some way.
 
Last edited:
wooshman said:
8pm until 1am there is no program desciption for SKY 1, Sky living Sky Atlantic.

If anyone could confirm this happens or doesn't happen with xmltv-importer please.

---------- Post Merged at 10:44 PM ----------

Willo3092 said:
I've just tried CrossEPG which didn't populate descriptions for Sky1 and Atlantic, then tried XMLTV importer which did, so obviously an issue with CrossEPG
Click to expand...
Thanks Willo for the feedback.

It is the same time every day with the same 3 channels.

I can;t say I have ever noticed before in the 4 months of using CrossEPG. Much faster than xmltv-import though so it will remain :-)

---------- Post Merged at 10:47 PM ----------

Bainze, your EPG is just seriously broken I am afraid. Do you do EPG updates?

Having that many missing program listings on your EPG means it is not working properly. Do you let CrossEPG update daily? If not I would do a manual scan now.

Green button -> CrossEPG
Click to expand...

No I don't think so since I update issue happened. Which is my fault. I ran cross epq ran it all but no change? How can settings me changed on it. And also how would I fix auto boquets issue as its a running loop of an update but never doing anything
 
Bainze said:
No I don't think so since I update issue happened. Which is my fault. I ran cross epq ran it all but no change? How can settings me changed on it. And also how would I fix auto boquets issue as its a running loop of an update but never doing anything
Click to expand...


I would backup your settings first, re-flash WooshBuild v3.03 using the instructions in post #1 and once flashed restore your settings following the instructions

Make sure you backup your settings though or you will lose your line.
 
wooshman said:
Bainze said:
No I don't think so since I update issue happened. Which is my fault. I ran cross epq ran it all but no change? How can settings me changed on it. And also how would I fix auto boquets issue as its a running loop of an update but never doing anything
Click to expand...


I would backup your settings first, re-flash WooshBuild v3.03 using the instructions in post #1 and once flashed restore your settings following the instructions

Make sure you backup your settings though or you will lose your line.
Click to expand...

I did the update, so are you saying j should fully reflash? From start using usb?
 
Bainze said:
I did the update, so are you saying j should fully reflash? From start using usb?
Click to expand...

You don't need to do all the USB stuff now you are running WooshBuild, hat is the good thing about it.

1. Backup your settings:
Blue button -> Backup Settings

2. Flash Online / Local
Blue button (if not already there) -> Flash Online / Local -> Green Button -> Select WooshBuild v3.03 H2S -> Green button again.

3. Restore settings
One the flash has rebooted your box
Blue button -> Restore settings. If it asks you if you want to restore plugins say no. You may have to add any extra plugins you added again.
 
Thanks for the build and step by step guide, all working fine apart from step 6. Which is the be all and end all for the mrs as we haven't got the local news?!
When I press the green button I get the Plugin Browser, I've looked through the menus and cant seem to find a heading for AutoBouqets or anywhere to access it.

Any help would be greatly appreciated!
 
Mac257 said:
Thanks for the build and step by step guide, all working fine apart from step 6. Which is the be all and end all for the mrs as we haven't got the local news?!
When I press the green button I get the Plugin Browser, I've looked through the menus and cant seem to find a heading for AutoBouqets or anywhere to access it.

Any help would be greatly appreciated!
Click to expand...
Can you upload a photo of what you're seeing?
 
Status
Not open for further replies.
Back
Top
Flash Sale Popup