Get the Best IPTV Service
Wooshbuild Support Thread | Page 20 | Techkings
What's new
By:

Wooshbuild Support Thread

Hi all,

Updated to v6 but now have only FTA channels working.

Could anybody test my line to see if it's a provider issue?

Thanks
 
danmed said:
Still just you.. It's very well documented

http://forum.kodicommunity.com/viewtopic.php?t=718

http://echannelizer.com/guide/how-to-assign-epg-picon/

Happy to try and guide you if you need assistance with it.. The best bit is that when you run the settings backup from WBConfig, it backs up the bouquets too so it all comes back after a restore.
Click to expand...

I've used the echannelizer method and got good epg for a bouquet I've created of sports hd channel from my IPTV and it great thanks for that information.

My question now is, is there a similar way to add epg to USA/Canadian sports channels TSN 1 for example. When I open the stream reference in echan it only gives me 28.2e Astra channels which obviously doesn't include TSN channels.

Hopefully I've explained myself correctly here.

TIA for any help.

Zgemma H.2S btw.


Sent from my iPhone using Tapatalk
 
Ok, so took the plunge and installed six, couple of issues once installed but easily fixed, i.e. Cam not running and line not being restored, however I'm wondering do we not get the slyk hd skin on here ?? Not sure I like the layout on this one ?


Sent from my iPhone using Tapatalk
 
The slyk skin was removed at kiddac's request.
You can install it yourself if you want or give the skywb skin a chance to see if it grows on you
 
Lyns said:
Hi, Just tried that and when I plug the USB in, nothing happens, it's like the box isbtvrecognising the USB.

Thanks!
Click to expand...
Im a bit lost at what you are trying to do
If your on v5 just upgrade thu wb config green button > wb config > backup settings reflash wooshbuild this will then put you on the latest version. You just need the usb that was originally set up for recording.
 
djgarf said:
The slyk skin was removed at kiddac's request.
You can install it yourself if you want or give the skywb skin a chance to see if it grows on you
Click to expand...

Thanks for quick response, I thought that but couldn't find on the skins part of plugins, does this need to be installed another way ?



Sent from my iPhone using Tapatalk
 
User457 said:
Thanks for quick response, I thought that but couldn't find on the skins part of plugins, does this need to be installed another way ?



Sent from my iPhone using Tapatalk
Click to expand...
Its not in the plugins feeds, Google search slyk and it should be the first result. You will need to install it manually by FTPing it over and using the ipk installer option on the box. Also you will need to edit the slyk extras.XML and change a few core files to get it setup as it was before
 
djgarf said:
Its not in the plugins feeds, Google search slyk and it should be the first result. You will need to install it manually by FTPing it over and using the ipk installer option on the box. Also you will need to edit the slyk extras.XML and change a few core files to get it setup as it was before
Click to expand...

Got it, thanks.

Looking forward to installing !


Sent from my iPhone using Tapatalk
 
wooshman said:
I have sat here and read most posts from the last 24 hours and I have no clue. At present I have given up.

If people bothered to read and follow instructions life would be so much easier instead of posting questions which have already been answered.

I am starting to lose the will to live.
Click to expand...

New build looks great man.. by any chance would you be able to test my line for me? I've updated to v6 without any problems, however, all my channels have stopped. I suspect it's a server issue but want to confirm.
 
Anybody able to help with a line check please, upgraded to v6 and only getting FTV, would rather make sure its the server than.a Woosh issue, thanks in advance
 
Same as Jammin, Since upgrading to WB Version 6 I can't get cam importer to transfer my line. could someone test my line please.
 
Lyns said:
Hi, Just tried that and when I plug the USB in, nothing happens, it's like the box isbtvrecognising the USB.

Thanks!
Click to expand...


Hi makido

I've been replying in earlier posts too- this is basically what I've done, I have followed all instructions & suggestions made to me and others in this thread/ relevant threads for my issue.



My issue was that my screen was black on all stations ( I wasn't just trying to do the update initially) first I tried an online update through the box (wb config) and it said that it was updated and it rebooted but the box is still the same (blank screen on all channels including FTA) .. I then went to the download section on this site & downloaded the v6 and did the whole unzip to basebuild, transferred it to my USB & then that's when I tried to put the USB in the back & nothing happened.

When I turn on the box after deep standby it's stuck on the woodhbuild v5 image. If I go into the tv stations through favourites they are all black.

I've seen the recent replies here saying updated v6 is ready again now, but when I go into wb config and try find any updates available it's saying nothing to update?

I tried the base build update again too and the same thing again, when I plug in the USB at the back nothing is happening.

I appreciate people's time trying to help me out, I am too losing the will to live when it comes to this! Im completely lost!
 
I'm having a problem getting my box to retain my line.

I have reflashed twice now (basebuild method) on two separate zgemma h2s boxes and have the same problem on both.

Reflash goes well installing v6 and initializing the HDD. However upon first using the USB cam importer it does not recognise that there is a file on my USB stick which I place in the front port (HDD in rear). To rectify this I do a software update.

After the software update USB cam importer recognises the file, imports as normal and my line fires up. However if I either restart my box (menu>Restart >Restart) or turn off (not standby) ie pull the plug the box boots as normal but fails to start the line. To restart the line I have made use of the new backup function in the USB cam importer and stored my line to the HDD and fire it up that way.

This problem is the same for both cccam and newcamd files.

Woosh team, it's far from a massive problem however I know your eager for feedback regarding v6 and thought it best to share.

Update: I have reflashed this morning and it has been resolved, there must have been an software update.


Sent from my iPhone using Tapatalk
 
Last edited:
When I installed v6 last night the cam importer wasnt showing my line, however this morning I've put my box into deep standby and rebooted and now it's there, everything working fine, thanks for v6 Woosh, have a beer on me!
 
2 quick questions

1) When i go epg there is a wierd black border around the edge of screen how how do i stretch screen to fit whole screen cant find the setting but sure i have seen it?.

2) My recording start to early and finish really late (like 10mins) how do I change to start 5min and finish 5mins.

Thanks
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup