Get the Best IPTV Service
WilloBuild - WilloBuild OpenViX 6.7 Series | Page 92 | Techkings
What's new
By:

WilloBuild WilloBuild OpenViX 6.7 Series

Willo how do I put the bouquet name in the grid epg like it does with your image? Using vix 6.6 at the moment. Laid up at the moment so faffing around.

1751277677463.png
 
It must be about 3 years since I adapted KiddaC's skin for my build so struggling to remember.
I think to put the bouquet title in, I had to move the programme title and description down a bit.
Plus I have adapted my own a bit further to cope with a small TV and shocking eyesight.

1751284274450.png
 
No woriies I have a big TV and eyesight .... welll not too bad with glasses. Out of interest can I swop your skin and will it work? Its no big deal just deskbound and sod all to do.
 
The bouquet name will work but lots of other stuff won't.
It's designed to work with my build and has had massive adaptations including lots to do with movie player and the converters and renderers.
I renamed everything from KiddaC's original because people were installing the true version over the top of my adaptation and it was causing lots of conflicts and crashes.
It also means that I don't have to do a lot of updates to it every time Kidda changes something.
There is a skin mods thread on KiddaC's home forum that he looks at a lot, so more help might be gotten from there.
 
Willo3092 said:
View attachment 38122

WILLOBUILD IS A CUSTOM OPENVIX BUILD


WILLOBUILD IS FLASHED DIRECTLY VIA PUTTY.
THERE IS NO NEED FOR USB FLASHING.
IT WILL ALWAYS FLASH THE LATEST IMAGE AND UPDATES CAN BE DONE VIA SOFTWARE UPDATE.
THIS SHOULD WORK ON ANY OPENVIX SUPPORTED RECEIVER.
IF YOU WOULD LIKE TO HELP ME WITH SERVER HOSTING COSTS :smiley: View attachment 86829

TO INSTALL COPY THIS CODE AND RIGHT CLICK IN PUTTY TO PASTE AND THEN PRESS ENTER.
Code: 
wget --no-check-certificate -O install_vix.sh http://www.willobuild.net/files/scripts/install_vix.sh && bash install_vix.sh

FULL INSTRUCTIONS

VIX 6.7 - YOU MUST RUN THE WILLOBUILD UPDATER PLUGIN AFTER RESTORING YOUR OWN SETTINGS BACKUP

IF YOUR RECEIVER CRASHES OR GETS STUCK ON BOOT, CONNECT TO THE RECEIVER WITH PUTTY AND FLASH THE BELOW RECOVERY SCRIPT
Code: 
wget --no-check-certificate -O recovery.sh http://www.willobuild.net/files/scripts/recovery.sh && bash recovery.sh

View attachment 99355



View attachment 115274



View attachment 99359



View attachment 99360



View attachment 99361



View attachment 99358




UP AND RUNNING IN 3 EASY STEPS:

1) FLASH USING PUTTY
2) RESTORE SETTINGS DURING WIZARD


DEFAULT PLAYLISTS LOCATION FOR BOUQUETMAKERXTREME AND XSTREAMITY IS /ETC/ENIGMA2



Many thanks to:
KiddaC for his amazing skins, Xstreamity and BouquetMakerXtream
Grog68 for his Movie Organisor plugin and flash script
Dsayers2014 for his plugins and all the ideas I've 'borrowed'​
Click to expand...
I have my IPTV playlists in bouquets but they’re seperate from my sat channels I’m just wondering how you get yours all together like a proper list of channels - looks amazing
 
Hi. I'm attempting to set up a ZGemma H9S for a friend. Wooshbuild was previously installed so I re-flashed to Willobuild (Openvix) using the guide here. SDD mounted to ext4.

I acquired a test line (xtream) and successfully added the playlist.

However that is as far as I get. Nothing happens after I added the playlist. Main screen is just as shown in the attached images.

Any advice would be great please


20250804_225302.jpg
20250804_225326.jpg
 
Last edited:
hicksy1982 said:
Hi. I'm attempting to set up a ZGemma H2S for a friend. Wooshbuild was previously installed so I re-flashed to Willobuild (Openvix) using the guide here. SDD mounted to ext4.

I acquired a test line (xtream) and successfully added the playlist.

However that is as far as I get. Nothing happens after I added the playlist. Main screen is just as shown in the attached images.

Any advice would be great please


View attachment 123394View attachment 123395
Click to expand...
You cannot run willobuild on that box openvix does not support the zgamma H2S model. Install plain openatv and download the plugins direct from the feeds.
 
hicksy1982 said:
Hi. I'm attempting to set up a ZGemma H9S for a friend. Wooshbuild was previously installed so I re-flashed to Willobuild (Openvix) using the guide here. SDD mounted to ext4.

I acquired a test line (xtream) and successfully added the playlist.

However that is as far as I get. Nothing happens after I added the playlist. Main screen is just as shown in the attached images.

Any advice would be great please


View attachment 123394View attachment 123395
Click to expand...
The test is active as its showing a green icon. You need to create a channel list now.

Press green button twice - tick the ones you want then green button again to create a playlist. Fav or Tv button then to bring up those channels
 
you
moshibeth said:
The test is active as its showing a green icon. You need to create a channel list now.

Press green button twice - tick the ones you want then green button again to create a playlist. Fav or Tv button then to bring up those channels
Click to expand...
you legend! Thanks! This is the step I had forgotten how to do
 
Hello.
I get this when I chose to restore during set up of the Zgemma H17.
The box then restarts and goes through the installation procedure as it should.
After setting up satellite,storage,epg etc the box hangs on 49 when I restart again.Any ideas?
Thanks.
feeds.jpg
 
Last edited:
I seem to remember someone on the WoS forum saying that the feeds were down on the latest ViX image but can't find the post now. (it may have been a dev image)
Did you try restoring later on via Backup Manager?
 
Willo3092 said:
I seem to remember someone on the WoS forum saying that the feeds were down on the latest ViX image but can't find the post now. (it may have been a dev image)
Did you try restoring later on via Backup Manager?
Click to expand...
Hello Willo.
Yes,tried that,no joy.
I have it running on Vix but would rather have the build.
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup