WilloBuild WilloBuild OpenViX 6.7 Series

[Abu Baniaz]

@Sir Osis
Vix 6.7 016 Release has been built. You should be fine now. You can double check by running the "opkg update" command again
P.S in future, best to paste results instead of a picture of the results.

 

[Sir Osis]

@Sir Osis
Vix 6.7 016 Release has been built. You should be fine now. You can double check by running the "opkg update" command again
P.S in future, best to paste results instead of a picture of the results.

Installed without any issues. and working perfectly.
Thanks lads.👍

 

[GoodOldBakes]

Just tried flashing the latest Willobuild 6.7 and my box has blanked out, or rather the screen has. It just says -100 on the box display. Been like that for quite some time now. Got as far as the screen/resolution wizard, then everything went black. Just tried switching off and on again. No change. Any suggestions?

My box is an Octagon S8008.

 

[moshibeth]

Just tried flashing the latest Willobuild 6.7 and my box has blanked out, or rather the screen has. It just says -100 on the box display. Been like that for quite some time now. Got as far as the screen/resolution wizard, then everything went black. Just tried switching off and on again. No change. Any suggestions?

My box is an Octagon S8008.

Flash it from recovery mode then run the willo script again. Make sure you have a USB mounted in the box before running willo script.

 

[moshibeth]

Just tried flashing the latest Willobuild 6.7 and my box has blanked out, or rather the screen has. It just says -100 on the box display. Been like that for quite some time now. Got as far as the screen/resolution wizard, then everything went black. Just tried switching off and on again. No change. Any suggestions?

My box is an Octagon S8008.

You can always switch to a different slot from recovery mode

 

[Willo3092]

Just tried flashing the latest Willobuild 6.7 and my box has blanked out, or rather the screen has. It just says -100 on the box display. Been like that for quite some time now. Got as far as the screen/resolution wizard, then everything went black. Just tried switching off and on again. No change. Any suggestions?

My box is an Octagon S8008.

Try changing the resolution from openwebif.

 

[GoodOldBakes]

Flash it from recovery mode then run the willo script again. Make sure you have a USB mounted in the box before running willo script.

How do I flash to recovery mode? Not sure if I still have the box manual. Thanks

 

[GoodOldBakes]

Had the box switched off from the mains for a while and just turned it back on. Started to load up and the 'OpenVix 6.7 WillBuild' boot screen is on, but it's stuck on 49, the number on the front of the box. OpenWebif won't connect to it, as it's turned off, to all intents and purposes I guess.

 

[moshibeth]

How do I flash to recovery mode? Not sure if I still have the box manual. Thanks

Turn the box off and hold the front power button as its powering back on i think it is from memory and that will put it ito recovery mode

 

[GoodOldBakes]

Ok, booted into recovery mode, into a stable version. Tried the WilloBuild again, via Putty and it didn't work. Ended up deleting all previous versions and back-ups. Still not flashed. I'm getting this screen/message at the end of the process. I'm thinking that 'Remote side unexpectedly closed network connection' is due to the box re-booting perhaps but what's the bit about 'Error starting autofs'? Also, when putty asks me about multiboot and which sector to partition, I'm skipping that bit. Should I be indicating something there? If so, what? I have no idea.

 

[Willo3092]

I would flash ViX from the recovery menu and start from scratch.
When it's working try again and select partition 2 to flash my build to.

 

[GoodOldBakes]

Ok thanks. I've gone back to my last image, ATV 7 (.2 I think) for now. Will probably try again at the weekend when I have more time.

 

[Willo3092]

If you try again, select another partition to the one that you've got ATV on when you install.
That way you can always boot back into ATV if anything goes wrong.

 

[wayachi]

I think that's the best way, will borrow a laptop tomorrow and use it. Today it's late night.

I tried over the weekend to log into my os mega on pc inorder to install willobuild but all i could manage was accessing hard drive only. Putty was giving me timed out error. I thought it was easy to do it but its the opposite, not a layman's job.

 

[moshibeth]

I tried over the weekend to log into my os mega on pc inorder to install willobuild but all i could manage was accessing hard drive only. Putty was giving me timed out error. I thought it was easy to do it but its the opposite, not a layman's job.

These boxes are not for novice users when things go wrong.

 

[Willo3092]

I tried over the weekend to log into my os mega on pc inorder to install willobuild but all i could manage was accessing hard drive only. Putty was giving me timed out error. I thought it was easy to do it but its the opposite, not a layman's job.

Have you set a password on the receiver?

 

[moshibeth]

Have you set a password on the receiver?

Pop round and do if for him mate i am sure he will make you a brew

 

[wayachi]

Have you set a password on the receiver?

Yes username and password

 

[wayachi]

Yes username and password

Network explorer showing the box

 

[Willo3092]

Do you mean it's showing in the network section of windows explorer?

Are you using the correct IP address?

Login with:

root

your password