WilloBuild WilloBuild OpenViX 6.6 Series

[BurneR10]

Bouquet maker Xtream is an alternative update to jedimaker

Xklass is an update on xstreamity. Both should be in feeds

Not showing for me unfortunately

 

[bmitie]

can you check to see if already installed, plugins red button etc

 

[dsayers2014]

Not showing for me unfortunately

What version of vix are you using? Menu, information, about.


Your screenshot looks like a load of extensions aren't showing

 

[bmitie]

He is right they are not there. on vix 6.6 and 6.5. I think used ipk to install bouqetmaker

 

[BurneR10]

Bouquet maker Xtream is an alternative update to jedimaker

Xklass is an update on xstreamity. Both should be in feeds

Not showinf for me unfortunately

can you check to see if already installed, plugins red button etc

 

[bmitie]

see above

 

[Willo3092]

I don't think the OP has even flashed my build.
I've just flashed my box:

 

[BurneR10]

What version of vix are you using? Menu, information, about.


Your screenshot looks like a load of extensions aren't showing

 

[BurneR10]

My son bought another router that lowers ping

I've just tried bypassing that router and connecting the Zgemma straight into first router and that has solved the problem. Thanks for the replies guys you ahve helped.

 

[bigjoe]

Thanks for the reply, at least I can rule that out, will look at other options with the error

<<Ignore - issue resolved, it was a lack of storage available, identified by df.>>

Hi, Did you get past this error? I get the same error when using the '--no-check-certificate' flag -
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
ERROR: cannot verify www.openvix.co.uk's certificate, issued by ‘CN=AlphaSSL CA - SHA256 - G4,O=GlobalSign nv-sa,C=BE’:
Issued certificate not yet valid.
To connect to www.openvix.co.uk insecurely, use `--no-check-certificate'.

<<Ignore - issue resolved, it was a lack of storage available, identified by df.>>

 

[BurneR10]

Hi, I'm having trouble disabling subtitles permanently. I can turn them off during a program. I've tried various settings but no joy. Thanks for any help.

 

[Willo3092]

If you're using my build, which I'm not convinced you are from looking at your screenshots.
From watching TV, just long press the yellow button.

 

[moshibeth]

If you're using my build, which I'm not convinced you are from looking at your screenshots.
From watching TV, just long press the yellow button.

Which button do i press for 18+ section

 

[BurneR10]

Which button do i press for 18+ section

The sticky one

 

[Goodolpete]

Hi,
Trying Willo3092, installed long ago, on openvix 6.4 rel 011
Do I need to update anything?
What is the equivalent to vix green button to display all scheduled recordings?

 

[BurneR10]

If you're using my build, which I'm not convinced you are from looking at your screenshots.
From watching TV, just long press the yellow button.

It's the Automatic Language setting. I've set it to None instead of English. This has disabled Auto Subs 😁

 

[chalker]

hi can eny body help please when i put willobuild imto putty and press enter it says network error time out

 

[pabloescaban]

hi can eny body help please when i put willobuild imto putty and press enter it says network error time out

What make usb sticks are you using?
You need a Sandisk, try and get a small one, 8 - 16gb, they have them at Asda and Tesco.

But before you get a new one, did you prepare the ones you tried?

Can you get to the menus on the zgemma so that you can initialise and mount the usb?

If not, did you format it to FAT32 using your PC/laptop before you do anything else?

 

[Willo3092]

hi can eny body help please when i put willobuild imto putty and press enter it says network error time out

Nothing wrong this end. Are you wired directly or trying to use wi-fi.


Welcome to OpenViX for ax61
openvix 6.6 ax61

ax61 login: root
Password:
root@ax61:~# wget --no-check-certificate -O install_vix.sh http://www.willobuild.net/files/scripts/install_vix.sh && bash install_vix.sh
--2024-07-26 19:05:11-- http://www.willobuild.net/files/scripts/install_vix.sh
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 8938 (8.7K) [application/x-sh]
Saving to: ‘install_vix.sh’

install_vix.sh 100%[===================>] 8.73K --.-KB/s in 0s

2024-07-26 19:05:11 (21.7 MB/s) - ‘install_vix.sh’ saved [8938/8938]

* * * * * * * * * * * * * * * * * * * * * * * * *
* *
* WILLOBUILD *
* *
* THANKS TO THE FOLLOWING TECHKINGS MEMBERS *
* FOR HELPING OUT WITH THE SERVER COSTS *
* *
* MOSHIBETH *
* ARTHUR POWELL *
* ANGUS SMYTH *
* SOLTIA *
* SADIK GUMUS *
* RAPIDWRINKLY *
* BMITIE *
* *
* IF YOU WOULD LIKE TO HELP TOWARDS SERVER COSTS: *
* *
* paypal.me/willobuild *
* *
* * * * * * * * * * * * * * * * * * * * * * * * *
directory already exists
--2024-07-26 19:05:22-- http://www.willobuild.net/files/tar/vix-rel-IM-6.6-willobuild.tar.gz
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 281577 (275K) [application/x-gzip]
Saving to: ‘vix-rel-IM-6.6-willobuild.tar.gz’

vix-rel-IM-6.6-will 100%[===================>] 274.98K --.-KB/s in 0.1s

2024-07-26 19:05:22 (2.61 MB/s) - ‘vix-rel-IM-6.6-willobuild.tar.gz’ saved [281577/281577]

--2024-07-26 19:05:22-- Downloads
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 34.19K --.-KB/s in 0.001s

2024-07-26 19:05:23 (24.0 MB/s) - written to stdout [35008]

1) ax-technology 8) medialink 15) spycat
2) amiko 9) miraclebox 16) technomate
3) edision 10) mutant 17) tiviar
4) forumler 11) octagon 18) venton-unibox
5) gigablue 12) odin-mara 19) vu-plus
6) golden-interstar 13) xtrend 20) zgemma
7) maxdigital 14) opticum
Please select the brand of your box1
You picked ax-technology which is option 1
now getting list of ax-technology boxes from AX TECHNOLOY IMAGES
--2024-07-26 19:05:48-- AX TECHNOLOY IMAGES
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: AX TECHNOLOY IMAGES [following]
--2024-07-26 19:05:49-- AX TECHNOLOY IMAGES
Reusing existing connection to www.openvix.co.uk:443.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 27.20K --.-KB/s in 0s

2024-07-26 19:05:49 (78.7 MB/s) - written to stdout [27857]

1) ax-hd61
Please select model of your box1
You picked ax-hd61 which is option 1
If using multiboot box please enter partition to flash: 3
--2024-07-26 19:05:53-- AX HD61
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: AX HD61 [following]
--2024-07-26 19:05:54-- AX HD61
Reusing existing connection to www.openvix.co.uk:443.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 30.73K --.-KB/s in 0.001s

2024-07-26 19:05:54 (33.0 MB/s) - written to stdout [31464]

--2024-07-26 19:05:54-- https://www.openvix.co.uk/openvix-builds/ax61/openvix-6.6.003.release-ax61_multi.zip
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 107810982 (103M) [application/zip]
Saving to: ‘latestvix.zip’

latestvix.zip 100%[===================>] 102.82M 11.3MB/s in 9.1s

 

[weimaraner95]

hi can eny body help please when i put willobuild imto putty and press enter it says network error time out

Did you actually connect to the receiver with the IP address username and password