WooshBuild v3.01- Zgemma 2S + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1

[benijofar]

I flashed from the link. Will retry.

You cannot flash from the link without first installing basebuild via usb.
Once this is done there is no wizard in german ?
Perhaps i am misunderstanding what you have done so far ?

 

[puremagic]

I installed basebuild and followed instructions. All went ok till it asked me to choose tv station that didn't happen. Just came up German.

so if I put basebuild onto usb and hold power button down will this load the base? Sorry very confused by all this today.

 

[benijofar]

Yes
You need to do this and the box will say boot then turn to FLSH.
When this finishes you can continue with the instructions for full installation.

 

[puremagic]

I'll give it another crack, thank you mate.

 

[kingdomkk]

Menu/plugins/dream explorer/usr/keys will show line details.
Just hit on whichever one you installed and the details will appear.
You can also use this method to edit the line if need be.

---------- Post Merged at 02:05 PM ----------

I've tried the download base build and followed instructions. It took me through a wizard, then in German and now has atv 5.1. Should I run the basebuild again? Not put my line on yet. Thanks.

You have not installed Basebuild.
This will come up in English after a correct woosh basebuild install.

Thanks alot worked a treat

Sent from my LG-H815 using Tapatalk

 

[puremagic]

Have installed basebuild and when I press exit 4 times I do t get channel 1 I just basebuild blue n white screen. So pressing green comes up with plugin browser? Any ideas please.

 

[soke1980]

I have followed the instructions line by line and seem to have hit a stumbling block when it comes to entering the c-line. The line is 100% fine as I have tried it on another device. I do not seem to be able to see the CCcam2.3.0 option in Softcam, all I can see is mgcamd_1.38r1. Any help would be appreciated??

 

[wooshman]

I have followed the instructions line by line and seem to have hit a stumbling block when it comes to entering the c-line. The line is 100% fine as I have tried it on another device. I do not seem to be able to see the CCcam2.3.0 option in Softcam, all I can see is mgcamd_1.38r1. Any help would be appreciated??

Remove the newcamd.list file from the USB stick leaving only cccam.cfg on the and import again. That is the normal problem.

---------- Post Merged at 06:44 PM ----------

Have installed basebuild and when I press exit 4 times I do t get channel 1 I just basebuild blue n white screen. So pressing green comes up with plugin browser? Any ideas please.

The instructions for this build took hours, lots of testing and lots more testing, step by step, line by line and word by word. I wrote them so people could follow them.

I installed basebuild and followed instructions. All went ok till it asked me to choose tv station that didn't happen. Just came up German.

If you installed BaseBuild and were then told to choose a TV station you really are not following the instructions. No where in the basebuild instructions does it say to choose a TV station. All basebuild is there for is to initialise a USB device, create a swap file and then flash WooshBuild.

Using today as an excuse for not reading instructions really is no excuse.

If I were you, I would would start from the very beginning and do what I did when I tested the instructions so even a brand new box user could follow them. Read them and follow them. Don't jump them, skip them, think you know best them. They are there for a reason and in that order for a reason.

-------------------------------------------------------------------

OK, who is next for a telling off?

 

[puremagic]

Whooshman I've read it tons of times. When it came up with different screens this is where I got lost. Got it working now..

 

[meatball1987]

can i follow these destructions even if i want to put it on a solo 2. i did search forum but nothing came up dont shout at me

 

[wooshman]

can i follow these destructions even if i want to put it on a solo 2. i did search forum but nothing came up dont shout at me

No I am afraid you can't. WooshBuild has only been built on Zgemma boxes and therefore uses the file structure and bootloader. To do what you ask would have required me to have setup a solo 2, created a backup and then shared it.


I am always looking for non zgemma spare boxes to build on, anything that is running enigma 2 and runs OpenATV and you can afford to be with for a month (I a slow and lazy) or indefinitely.

 

[Saf]

corrupted file?

Hi, trying to flash with this image. However when extracting the files one of the files (kernel.bin) says its corrupted. any ideas? or is it just the way its been extracted?i use a mac by the way, not had issues flashing before and i use a sandisk cruzer.
cheers

 

[wooshman]

Hi, trying to flash with this image. However when extracting the files one of the files (kernel.bin) says its corrupted. any ideas? or is it just the way its been extracted?i use a mac by the way, not had issues flashing before and i use a sandisk cruzer.
cheers

Download BaseBuild again and try again.

 

[james15]

i still cant find the h2h image or file? other than that the build is the best by far instructions are excellent mate!

 

[wooshman]

i still cant find the h2h image or file? other than that the build is the best by far instructions are excellent mate!

You need to use the H2S thread. BaseBuild gets installed (for the H2S) and then when you flash online you will see the H2H version for download.

The link to the H2S thread in in my signature.

 

[Saf]

Hi, trying to flash with this image. However when extracting the files one of the files (kernel.bin) says its corrupted. any ideas? or is it just the way its been extracted?i use a mac by the way, not had issues flashing before and i use a sandisk cruzer.
cheers

Download BaseBuild again and try again.

Just tried that mate. Still no joy with the unzipping of the files. Tried placing it on usb and flashing but stuck in boot so its not unzipping the file. Still says corrupt.

 

[wooshman]

Hi, trying to flash with this image. However when extracting the files one of the files (kernel.bin) says its corrupted. any ideas? or is it just the way its been extracted?i use a mac by the way, not had issues flashing before and i use a sandisk cruzer.
cheers

Download BaseBuild again and try again.

Just tried that mate. Still no joy with the unzipping of the files. Tried placing it on usb and flashing but stuck in boot so its not unzipping the file. Still says corrupt.

There shouldn't be a zip file on the USB Saf, you need:

zgemma
---------h3
-----------5 files

That is what goes on the USB stick to flash, extract the zip file, but don't extract to, otherwise it creates an extra folder before zgemma.

 

[trainspotter]

can i follow these destructions even if i want to put it on a solo 2. i did search forum but nothing came up dont shout at me

No I am afraid you can't. WooshBuild has only been built on Zgemma boxes and therefore uses the file structure and bootloader. To do what you ask would have required me to have setup a solo 2, created a backup and then shared it.


I am always looking for non zgemma spare boxes to build on, anything that is running enigma 2 and runs OpenATV and you can afford to be with for a month (I a slow and lazy) or indefinitely.

would you be interested on working on a gigablue 800 ue plus?..ive got one hear doing practically f<ck all

 

[wooshman]

can i follow these destructions even if i want to put it on a solo 2. i did search forum but nothing came up dont shout at me

No I am afraid you can't. WooshBuild has only been built on Zgemma boxes and therefore uses the file structure and bootloader. To do what you ask would have required me to have setup a solo 2, created a backup and then shared it.


I am always looking for non zgemma spare boxes to build on, anything that is running enigma 2 and runs OpenATV and you can afford to be with for a month (I a slow and lazy) or indefinitely.

would you be interested on working on a gigablue 800 ue plus?..ive got one hear doing practically f<ck all

I have sent a PM, thank you.

---------- Post Merged at 11:07 PM ----------

Ah right think that may be it "extracting to". Will give it a bash again tomorrow. Cheers

It will be something little like that, but as long as you have that folder structure on the USB it should flash. If not, look at trying a different USB stick, use HDDGuru to low level format a stick, re format to fat32.... ant of the possible fixes to get a flash going.

 

[Saf]

Hi, trying to flash with this image. However when extracting the files one of the files (kernel.bin) says its corrupted. any ideas? or is it just the way its been extracted?i use a mac by the way, not had issues flashing before and i use a sandisk cruzer.
cheers

Download BaseBuild again and try again.

Just tried that mate. Still no joy with the unzipping of the files. Tried placing it on usb and flashing but stuck in boot so its not unzipping the file. Still says corrupt.

There shouldn't be a zip file on the USB Saf, you need:

zgemma
---------h3
-----------5 files

That is what goes on the USB stick to flash, extract the zip file, but don't extract to, otherwise it creates an extra folder before zgemma.

can i follow these destructions even if i want to put it on a solo 2. i did search forum but nothing came up dont shout at me

No I am afraid you can't. WooshBuild has only been built on Zgemma boxes and therefore uses the file structure and bootloader. To do what you ask would have required me to have setup a solo 2, created a backup and then shared it.


I am always looking for non zgemma spare boxes to build on, anything that is running enigma 2 and runs OpenATV and you can afford to be with for a month (I a slow and lazy) or indefinitely.

would you be interested on working on a gigablue 800 ue plus?..ive got one hear doing practically f<ck all

I have sent a PM, thank you.

---------- Post Merged at 11:07 PM ----------

Ah right think that may be it "extracting to". Will give it a bash again tomorrow. Cheers

It will be something little like that, but as long as you have that folder structure on the USB it should flash. If not, look at trying a different USB stick, use HDDGuru to low level format a stick, re format to fat32.... ant of the possible fixes to get a flash going.

Maybe the usb has got corrupted as ive not used in a while, think ill try with another usb first. Cheers wooshman