Get the Best IPTV Service
Wooshbuild Support Thread | Page 29 | Techkings
What's new
By:
Filters

Wooshbuild Support Thread

wooshman said:
WooshBuild is now available on the following boxes:

Zgemma S, H2S, HS
Zgemma H2H - (cable / sat) - OpenATV 6
Zgemma H1*, H2*
Zgemma H5-2S
Zgemma H5 (cable / sat) - OpenATV 6
Vu+ Solo4k - Twin sat
Vu+ Zero - OpenATV 6
Vu+ Solo2 - OpenATV 6
Vu+ Duo2 - OpenATV
Edision os mini - OpenATV 6
Xtrend 8500 (ET8500) - Twin sat - OpenATV 6

Until Boxes marked with * have their own WooshBuild version, you will need AutoBouqetMaker to be used in place of AutoBouquet E2. Due to not having a cable connection we are unable to test or offer support. However, with this said, there are users of all the above boxes using WooshBuild v5 without a problem on cable boxes.

WooshBuild 5.003 / 6 - This is the current version you will get if you do a clean install or reflash Wooshbuild from WB Config.

What's New:
WB Config updated to 1.040
Ability to help users with lines not working
WooshBuild TV bouquet working again

Chabs Sky WB Skin as standard - v1.005 - Updates automatically via software updates
Slyk currently remains to avoid seeing the default skin when you restore settings. Newer versions of WooshBuild don't have Slyk installed as per Kiddac's request back in November to remove it and you will need to manually install it if you want it.

Chabs SkyQ skin
This is now installed as standard to take advantage of the Quick Skin Switcher in WB Config
This will now automatically update (when update is available) via standard Software Update method
Within the WooshBuild section on the plugins download screen is SkyQ picons - this will remove the large Q when changing channels. These, once installed will update automatically

Movie Organiser Plugin
This great plugin by Grog68 sorts your recordings like Sky does and updates via the plugin and software updates.

IPTV Player
Green button -> WB Config -> Highlight Enable system message alerts -> Press OK button
WooshBuild 5.xxx is available message and WB Config screen.
View attachment 20675 View attachment 20676
If there is a new WooshBuild version available, when you start / restart or restart the gui of your box you will see a message in the top left of your screen informing you an update is available (image 1) (this is providing you have notifications enabled within WB Config)

1. From full screen TV, press the green button to open the plugins screen and select WB Config
2. You will then see WB Config. As you look down the list of options you will will a green dot, this is to tell you an update is available. (image 2)
3. Highlight "Upgrade to WooshBuild v5.xxx" and press the OK button.
4. Follow the onscreen prompts.

5. Once the latest version of WooshBuild has downloaded and flashed, return to WB Config and restore your settings (which were created automatically before flashing)

It is that simple and takes 5 minutes.

CCcam.cfg: https://www.dropbox.com/s/sx4bq2gsbwcc4z4/CCcam.cfg?dl=1
newcamd.list: https://www.dropbox.com/s/oasmsuqfyty62ew/newcamd.list?dl=1

Both the below would go in CCcam.cfg
C: servername.net port username password
N: servername.net port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
(The C: may have the numbers too - not an issue but not needed)

Below goes into newcamd.list
CWS = servername.net port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

If you have removed the mg_cam from the usr/keys folder during your sorting here it is to be put back in: https://www.dropbox.com/s/jsa196ppj6s2qfr/mg_cfg?dl=1

Missing Channels - Everyone has missing channels. WooshBuild TV will have alternatives if available and just needs your box restarting to update them.

You need to be running at least WooshBuild v5.003 and WB Config 1.039 for the WooshBuild TV bouquet to be available.

This thread is not the place to discuss missing channels
Click to expand...
 
duckmycity said:
From 5 to 6

Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
If the usb is mounted as media/hdd then that is where the update will download to. If it is saying there isn't enough space, how much space is on there?

What other USB devices are in the box?
Shut down the box, remove any extra devices and then start it up as normal with one device plugged in.
 
wooshman said:
If the usb is mounted as media/hdd then that is where the update will download to. If it is saying there isn't enough space, how much space is on there?

What other USB devices are in the box?
Shut down the box, remove any extra devices and then start it up as normal with one device plugged in.
Click to expand...

It's a 32gb USB.... Tried to check it on the PC but it couldn't read it..... How do I check its capacity now.
There are no other devices plugged in. I have started as you suggest but same message comes up. Baffling

Sent from my ONEPLUS A3003 using Tapatalk
 
Sparkrite said:
Enigma2 is like the OS of the box.
If you want PM me your line and I'll check it out for you and reformat it if need be and send it back to you.

PS: BTW do you know if your line is a C/N line or a MGcam line?
Click to expand...
I know i have said this in email but i think it needs to be said in this group as well. I cant thank you and Makido enough for the time and effort you have put in today to solve my problem for me. Incredible dedication that needs recognising. Plus you solved it as well! So thank you both for getting me up and running again.
 
hi guys,
I've added iptv to my v5 using a script file and putty. and downloaded epgimport to get populate the tabs. all working perfect along side the line epg.. now with all the line drama really kicking up a gear how can i remove all the line epgs tabs and just use the epg tabs?
 
daniogroove said:
hi guys,
I've added iptv to my v5 using a script file and putty. and downloaded epgimport to get populate the tabs. all working perfect along side the line epg.. now with all the line drama really kicking up a gear how can i remove all the line epgs tabs and just use the epg tabs?
Click to expand...
Remove Auto Bouquets E2 from plugins and then manually remove the bouquets you don't want from the TV -> Menu
 
duckmycity said:
It's a 32gb USB.... Tried to check it on the PC but it couldn't read it..... How do I check its capacity now.
There are no other devices plugged in. I have started as you suggest but same message comes up. Baffling

Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
You should be able to press the file list button and it will tell you the disk space.
 
I think since I updated to v6 every few mins I keep getting the spinning loading icon in the top left for a few seconds. Any one got any idea what's happening..
I've disabled timeshift tried a different USB flash stick and still happening
 
Lip9571 said:
I think since I updated to v6 every few mins I keep getting the spinning loading icon in the top left for a few seconds. Any one got any idea what's happening..
I've disabled timeshift tried a different USB flash stick and still happening
Click to expand...
Have you got cache flush enabled sometimes that helps,or tweaking the settings on it
 
hi
i have tried to reflash with latest wooshbuild on vu+solo2
it flashes ok but then gets stuck on starting I have had it running on latest version before but now stuck on starting have seen previous posts about
formatting usb to fat 32 have even tried different usbs but no joy
any help please
 
My first time using wooshbuild and must say its spot on.

My only issue would be that it doesnt have a vm skin - Does anyone know if this can be added??

Thanks
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup