Get the Best IPTV Service
WilloBuild - WilloBuild OpenViX 6.6 Series | Page 59 | Techkings
What's new
By:
Filters

WilloBuild WilloBuild OpenViX 6.6 Series

Hi Trying to flash the latest 6.5 image onto a GIGABLUE have connected via ssh then entered

wget --no-check-certificate -O install_vix.sh http://www.willobuild.net/files/scripts/install_vix.sh && bash install_vix.sh

After entering that I get:

ERROR: cannot verify www.openvix.co.uk's certificate, issued by ‘CN=AlphaSSL CA - SHA256 - G4,O=GlobalSign nv-sa,C=BE’:
Issued certificate not yet valid.

Any ideas on where to go from here,
 
It's working here.
Bash: 
Welcome to OpenViX for ax61
openvix 6.5 ax61

ax61 login: root
Password:
root@ax61:~# wget --no-check-certificate -O install_vix.sh http://www.willobuild.net/files/scripts/install_vix.sh && bash install_vix.sh
--2024-05-14 21:40:29--  http://www.willobuild.net/files/scripts/install_vix.sh
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 8877 (8.7K) [application/x-sh]
Saving to: ‘install_vix.sh’

install_vix.sh      100%[===================>]   8.67K  --.-KB/s    in 0.001s

2024-05-14 21:40:29 (5.98 MB/s) - ‘install_vix.sh’ saved [8877/8877]

 * *  * * * * * * * * * * * * * * * * * * * * *  * *
 *                                                 *
 *                  WILLOBUILD                     *
 *                                                 *
 *   THANKS TO THE FOLLOWING TECHKINGS MEMBERS     *
 *   FOR HELPING OUT WITH THE SERVER COSTS         *
 *                                                 *
 *              MOSHIBETH                          *
 *              ARTHUR POWELL                      *
 *              ANGUS SMYTH                        *
 *              SOLTIA                             *
 *              SADIK GUMUS                        *
 *              RAPIDWRINKLY                       *
 *                                                 *
 * IF YOU WOULD LIKE TO HELP TOWARDS SERVER COSTS: *
 *                                                 *
 *            paypal.me/willobuild                 *
 *                                                 *
 * *  * * * * * * * * * * * * * * * * * * * * *  * *
 directory already exists
--2024-05-14 21:40:39--  http://www.willobuild.net/files/tar/vix-rel-IM-6.5-willobuild.tar.gz
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 286485 (280K) [application/x-gzip]
Saving to: ‘vix-rel-IM-6.5-willobuild.tar.gz’

vix-rel-IM-6.5-will 100%[===================>] 279.77K  --.-KB/s    in 0.1s

2024-05-14 21:40:40 (2.43 MB/s) - ‘vix-rel-IM-6.5-willobuild.tar.gz’ saved [286485/286485]

--2024-05-14 21:40:40--  https://www.openvix.co.uk/index.php/downloads/
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

-                       [ <=>                ]  34.19K  --.-KB/s    in 0.004s

2024-05-14 21:40:40 (7.73 MB/s) - written to stdout [35008]

1) ax-technology       8) medialink         15) spycat
2) amiko               9) miraclebox        16) technomate
3) edision            10) mutant            17) tiviar
4) forumler           11) octagon           18) venton-unibox
5) gigablue           12) odin-mara         19) vu-plus
6) golden-interstar   13) xtrend            20) zgemma
7) maxdigital         14) opticum
Please select the brand of your box
 
Got a zgemma h7s from a friend to see if I can fix a freezing problem. Its the old model 2022 vintage. it had openatv 6.3 in slot 1 in kodi mode. I flashed vix 6.4 to slot 2 a clean install and then loaded the slyk skin they love. Did a bit of zapping, used menu settings for things like movie planner, epg channel settings and .. it froze. Rebooted and now using vix blue skin. no zapping yet but if I load willio build in slot 3 as a new install and as all the bits will be configured correctly and the box frezzes can I just say box is a dead duck?? It has been going through this freezing for weeks/months. 2 free slots left.
 
My build is just for ViX 6.5 now.
I will need the debug or crash log from /media/hdd/logs/ to see what's causing the freeze.
PM it to me if there are IPTV details in it, or delete them.

My mother in law has an old H7 that runs perfectly well on it.
 
bmitie said:
Got a zgemma h7s from a friend to see if I can fix a freezing problem. Its the old model 2022 vintage. it had openatv 6.3 in slot 1 in kodi mode. I flashed vix 6.4 to slot 2 a clean install and then loaded the slyk skin they love. Did a bit of zapping, used menu settings for things like movie planner, epg channel settings and .. it froze. Rebooted and now using vix blue skin. no zapping yet but if I load willio build in slot 3 as a new install and as all the bits will be configured correctly and the box frezzes can I just say box is a dead duck?? It has been going through this freezing for weeks/months. 2 free slots left.
Click to expand...

Id try another PSU on it, as it seems to be freezing on various images a psu swap would be the first thing id try.
 
There is a crash log from 12 May but as of yet I would not know if IPTV was included. I think they have not renewed yet.

will send via pm in a while.
 
oops my post above was too early in the morning!! and I was distracted. This is the correct scenario. In slot one it has openatv 6.3 in kodi mode but no kodi installed. This was the image I was able to create the crash by doing a bit of messing. I then loaded Vix 6.4 in slot 2 as a clean install. I could not get it to crash but my thinking was/is I may have installed something badly and caused the crasH/ freezing whereas with Willlo I would only follow the guide and the rest would be done for me. then if box crashed it should not be blamed on the software. If that makes sense.

Well its been running all day and nothing no freezing, changed skins, configured epg and so on., used recordings.

I will laod willo later in slot 3 and have a look, probably set up ace and then if it crashed with Willo I can send crash log:laughing:
 
Last edited:
I can't even remember what spec the Trio is now.
It's certainly not a small version of the GBUE4K or the GBUHD4K as I thought.
No FBC tuners either like the others.
 
Willo3092 said:
I can't even remember what spec the Trio is now.
It's certainly not a small version of the GBUE4K or the GBUHD4K as I thought.
No FBC tuners either like the others.
Click to expand...
Press the remote control pop for a pint and when you get back 2 hrs later the channel will just about have changed over :ROFLMAO:
 
Willo3092 said:
My build is just for ViX 6.5 now.
I will need the debug or crash log from /media/hdd/logs/ to see what's causing the freeze.
PM it to me if there are IPTV details in it, or delete them.

My mother in law has an old H7 that runs perfectly well on it.
Click to expand...
My box is uclan ustym 4k pro. Is it possible to install your build on it.
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup