Get the Best IPTV Service
WilloBuild - WilloBuild OpenViX 6.6 Series | Page 2 | Techkings
What's new
By:
Filters

WilloBuild WilloBuild OpenViX 6.6 Series

urie said:
Thanks @Willo3092 , I have tried both those scripts before just to install plain VIX and OpenATV they error on my zgemma H9 combo
error as posted in picture above cannot flash kernel, because no kernel file was found.
probabley due to partitions layout not sure, yet yours and grogs build will install but iv'e got to enter reboot in putty when script has finished
Click to expand...
oops, the ATV script is probably because it may have been grabbing the recorvery image, which it shouldn't do, I fixed this in the grogbuild setup script but not the install_atv script. Should be fixed now.

Not sure about the VIX install script, it could well require a rewrite as the vix site did change which I updated grogbuild script but can't remember if I did for the VIX install script, unfortunately won't be able to look at it for a week or so due to other commitments, ie the wife insisting on diy being finished, you know those jobs started months/years ago lol
 
@grog68 ,you said Should be fixed now ? did you mean grogbuild atv because just tried the openatv one and :
Code: 
If using multiboot box please enter partition to flash: 2
--2021-02-18 21:50:29--  http://images.mynonpublic.com/openatv/current/zgemmah9combo/openatv-6.4-zgemmah9combo-20210218_full_recovery_emmc.zip
 
ah just noticed, the atv images filenames are different for the h9combo compared to other boxes, ie the H7 has the following images:

Code: 
openatv-6.4-zgemmah7-20210217_usb.zip
openatv-6.4-zgemmah7-20210218_usb.zip
openatv-6.4-zgemmah7-20210216_recovery_emmc.zip
openatv-6.4-zgemmah7-20210217_recovery_emmc.zip
openatv-6.4-zgemmah7 -20210218_recovery_emmc.zip

the H9Combo files are as follows:

Code: 
openatv-6.4-zgemmah9combo-20210217_mmc.zip
openatv-6.4-zgemmah9combo-20210218_mmc.zip
openatv-6.4-zgemmah9combo-20210215_recovery_emmc.zip
openatv-6.4-zgemmah9combo-20210217_recovery_emmc.zip
openatv-6.4-zgemmah9combo -20210218_recovery_emmc.zip
openatv-6.4-zgemmah9combo-20210215_full_recovery_emmc.zip
openatv-6.4-zgemmah9combo-20210217_full_recovery_emmc.zip openatv- 6.4- zgemmah9combo-
20210218_full_recovery_zip

Now both the grogbuild setup script and the install_atv script (as off tonight) ignores the recovery files and then uses the latest non recovery image. Normally this is the usb.zip image, on the H9combo it would be the mmc.zip file, I assume this is OK as grogbuild has worked fine but also noticed the last line has two images on the same line, wonder if a bit of bad html code is breaking my link extractor code
 
just tried my code but forcing it to think its running on the h9combo box and it did download the correct image using the code

Code: 
wget -O latestatv http://images.mynonpublic.com/openatv/current/zgemmah9combo/openatv-6.4-zgemmah9combo-20210218_mmc.zip
 
grog68 said:
Yea that's what I thought, and the script does appear to fetch the latest image, not sure why its not actually working on your box. Did you say grogbuild installs ok?
Click to expand...
but the image it is downloading for openatv only is full recovery image that would totally scrub the box I never noticed that the last time

it may not be working because it is trying to flash partition 2 but that is good thing it did not work but it would have been no trouble i have recent backup
 
I don't think it will flash a full recovery image using the online method will it?
That's what used to happen with ViX and you'd get a flash failed message.
 
urie said:
but the image it is downloading for openatv only is full recovery image that would totally scrub the box I never noticed that the last time

it may not be working because it is trying to flash partition 2 it would but that is good thing it did not work but it would have been no trouble i have recent back
Click to expand...
And the Muppet of the year for 2021 is Grog68. I haven't copied the fixed script over to Dropbox doh.

I've shut computer down now so will copy to Dropbox in the morning.
 
grog68 said:
And the Muppet of the year for 2021 is Grog68. I haven't copied the fixed script over to Dropbox doh.

I've shut computer down now so will copy to Dropbox in the morning.
Click to expand...
Absolutely no rush mate, youve got other stuff to do.
 
grog68 said:
OK @urie give it another go, the script SHOULD now be on Dropbox
Click to expand...
Still no joy here is output from putty.

Code: 
login as: root
root@192.168.0.14's password:
root@zgemmah9combo:~#
root@zgemmah9combo:~#
root@zgemmah9combo:~#  wget --no-check-certificate -O installatv.sh https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1 && bash installatv.sh
--2021-02-19 16:18:02--  https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1
Resolving www.dropbox.com... 162.125.64.18, 2620:100:6020:18::a27d:4012
Connecting to www.dropbox.com|162.125.64.18|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: /s/dl/nqbo698rxconave/installatv.sh [following]
--2021-02-19 16:18:03--  https://www.dropbox.com/s/dl/nqbo698rxconave/installatv.sh
Reusing existing connection to www.dropbox.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com/cd/0/get/BJOVkd5JzB5mu9i_yn0Wo-n7fXqeKZXDlpz452CWHxX0W-waKj4WsP5Rd6MLr-IPtBNMasiciklM5IcRwhd4H17zUo3rsAq502mYdigkv4xTWEJQ5Fk0VF1-rKS3GVJrZrc/file?dl=1# [following]
--2021-02-19 16:18:03--  https://ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com/cd/0/get/BJOVkd5JzB5mu9i_yn0Wo-n7fXqeKZXDlpz452CWHxX0W-waKj4WsP5Rd6MLr-IPtBNMasiciklM5IcRwhd4H17zUo3rsAq502mYdigkv4xTWEJQ5Fk0VF1-rKS3GVJrZrc/file?dl=1
Resolving ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com... 162.125.64.15, 2620:100:6020:15::a27d:400f
Connecting to ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com|162.125.64.15|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 913 [application/binary]
Saving to: ‘installatv.sh’

installatv.sh            100%[==================================>]     913  --.-KB/s    in 0s

2021-02-19 16:18:04 (38.2 MB/s) - ‘installatv.sh’ saved [913/913]

You are about to flash your zgemmah9combo box with the latest stable image of ATV
If using multiboot box please enter partition to flash: 2
--2021-02-19 16:18:10--  http://images.mynonpublic.com/openatv/current/zgemmah9combo/openatv-6.4-zgemmah9combo-20210219_mmc.zip
Resolving images.mynonpublic.com... 136.243.69.212, 176.9.45.237
Connecting to images.mynonpublic.com|136.243.69.212|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 100378556 (96M) [application/zip]
Saving to: ‘latestatv’

latestatv                100%[==================================>]  95.73M  8.48MB/s    in 13s

2021-02-19 16:18:23 (7.58 MB/s) - ‘latestatv’ saved [100378556/100378556]

Archive:  latestatv.zip
   creating: h9combo/
  inflating: h9combo/rootfs.tar.bz2
  inflating: h9combo/uImage
  inflating: h9combo/force_h9combo_READ.ME
  inflating: h9combo/imageversion
  inflating: unforce_h9combo.txt
mkdir: can't create directory '/newroot': File exists

ofgwrite Utility v4.5.6
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs
Flashing kernel
Error: Wrong multiboot partition value. Only values between 0 and 9 are allowed!
Usage: ofgwrite <parameter> <image_directory>
Options:
   -k --kernel           flash kernel with automatic device recognition(default)
   -kmtdx --kernel=mtdx  use mtdx device for kernel flashing
   -kmmcblkxpx --kernel=mmcblkxpx  use mmcblkxpx device for kernel flashing
   -r --rootfs           flash rootfs with automatic device recognition(default)
   -rmtdy --rootfs=mtdy  use mtdy device for rootfs flashing
   -rmmcblkxpx --rootfs=mmcblkxpx  use mmcblkxpx device for rootfs flashing
   -mx --multi=x         flash multiboot partition x (x= 1, 2, 3,...). Only supported by some boxes.
   -n --nowrite          show only found image and mtd partitions (no write)
   -f --force            force kill e2
   -q --quiet            show less output
   -h --help             show help
root@zgemmah9combo:~#

I deleted newroot folder from Root and atvimage folder from hard drive and rebooted zgemma.
And tried again still the same output but no error about newroot folder. mkdir: can't create directory '/newroot': File exists
 
urie said:
Still no joy here is output from putty.

Code: 
login as: root
root@192.168.0.14's password:
root@zgemmah9combo:~#
root@zgemmah9combo:~#
root@zgemmah9combo:~#  wget --no-check-certificate -O installatv.sh https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1 && bash installatv.sh
--2021-02-19 16:18:02--  https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1
Resolving www.dropbox.com... 162.125.64.18, 2620:100:6020:18::a27d:4012
Connecting to www.dropbox.com|162.125.64.18|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: /s/dl/nqbo698rxconave/installatv.sh [following]
--2021-02-19 16:18:03--  https://www.dropbox.com/s/dl/nqbo698rxconave/installatv.sh
Reusing existing connection to www.dropbox.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com/cd/0/get/BJOVkd5JzB5mu9i_yn0Wo-n7fXqeKZXDlpz452CWHxX0W-waKj4WsP5Rd6MLr-IPtBNMasiciklM5IcRwhd4H17zUo3rsAq502mYdigkv4xTWEJQ5Fk0VF1-rKS3GVJrZrc/file?dl=1# [following]
--2021-02-19 16:18:03--  https://ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com/cd/0/get/BJOVkd5JzB5mu9i_yn0Wo-n7fXqeKZXDlpz452CWHxX0W-waKj4WsP5Rd6MLr-IPtBNMasiciklM5IcRwhd4H17zUo3rsAq502mYdigkv4xTWEJQ5Fk0VF1-rKS3GVJrZrc/file?dl=1
Resolving ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com... 162.125.64.15, 2620:100:6020:15::a27d:400f
Connecting to ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com|162.125.64.15|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 913 [application/binary]
Saving to: ‘installatv.sh’

installatv.sh            100%[==================================>]     913  --.-KB/s    in 0s

2021-02-19 16:18:04 (38.2 MB/s) - ‘installatv.sh’ saved [913/913]

You are about to flash your zgemmah9combo box with the latest stable image of ATV
If using multiboot box please enter partition to flash: 2
--2021-02-19 16:18:10--  http://images.mynonpublic.com/openatv/current/zgemmah9combo/openatv-6.4-zgemmah9combo-20210219_mmc.zip
Resolving images.mynonpublic.com... 136.243.69.212, 176.9.45.237
Connecting to images.mynonpublic.com|136.243.69.212|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 100378556 (96M) [application/zip]
Saving to: ‘latestatv’

latestatv                100%[==================================>]  95.73M  8.48MB/s    in 13s

2021-02-19 16:18:23 (7.58 MB/s) - ‘latestatv’ saved [100378556/100378556]

Archive:  latestatv.zip
   creating: h9combo/
  inflating: h9combo/rootfs.tar.bz2
  inflating: h9combo/uImage
  inflating: h9combo/force_h9combo_READ.ME
  inflating: h9combo/imageversion
  inflating: unforce_h9combo.txt
mkdir: can't create directory '/newroot': File exists

ofgwrite Utility v4.5.6
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs
Flashing kernel
Error: Wrong multiboot partition value. Only values between 0 and 9 are allowed!
Usage: ofgwrite <parameter> <image_directory>
Options:
   -k --kernel           flash kernel with automatic device recognition(default)
   -kmtdx --kernel=mtdx  use mtdx device for kernel flashing
   -kmmcblkxpx --kernel=mmcblkxpx  use mmcblkxpx device for kernel flashing
   -r --rootfs           flash rootfs with automatic device recognition(default)
   -rmtdy --rootfs=mtdy  use mtdy device for rootfs flashing
   -rmmcblkxpx --rootfs=mmcblkxpx  use mmcblkxpx device for rootfs flashing
   -mx --multi=x         flash multiboot partition x (x= 1, 2, 3,...). Only supported by some boxes.
   -n --nowrite          show only found image and mtd partitions (no write)
   -f --force            force kill e2
   -q --quiet            show less output
   -h --help             show help
root@zgemmah9combo:~#

I deleted newroot folder from Root and atvimage folder from hard drive and rebooted zgemma.
And tried again still the same output but no error about newroot folder. mkdir: can't create directory '/newroot': File exists
Click to expand...

ignoring the newroot folder issue, the multiboot partition value error is the one that I would look at first, i've not got a multiboot box anymore so can't check but not sure why you are getting that error, you didn't enter a number, delete and then enter another number or anything did you?
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup