Get the Best IPTV Service
Scripts and Guide for setting up OpenVPN with Most VPN,s on Enigma2 | Page 34 | Techkings
What's new
By:

Scripts and Guide for setting up OpenVPN with Most VPN,s on Enigma2

pabloescaban said:
What plugin are you using for IPTV?
If jedi or xtreamity just create bouquets as normal and try a channel.
You shouldn't change DNS to 8888.
Have you tried your IPTV sub on an Android device to check it's working?
Click to expand...

There seems to be contradictory information on the DNS. If it isn’t changed to 8.8.8.8 what should it be? It was previously the +net IP address.

I use Xstreamity for VOD and catch-up but in trying to login I get an error as if the details aren’t recognised. I assumed this was because I wasn’t connected.

If I am not properly connected I assume this would cause problems with downloading the extension E2m3uBouquets.

Thanks for bearing with me
 
dsayers2014 said:
If IP address changes then all should be fine. For AutoBouquetsMaker probably best starting another thread to avoid confusion
Click to expand...
Thank you I will do, is there a way I can check the box is successfully connected through the VPN?
I wondered if the bouquets weren’t downloading properly as I wasn’t connected.
Thanks for your help
 
Jamesr said:
I have been using IPTV autobouquet maker. There appears to be an issue with E2m3uBouquets when running a new script telling me no such file or directory. I have uninstalled and reinstalled, rebooted and ran a new script but get the same message
Click to expand...
Did your provider give you an m3u or host, port, user and password?

Did you ask him if a VPN is allowed as most don't allow the use of a VPN if they have one server side
Jamesr said:
There seems to be contradictory information on the DNS. If it isn’t changed to 8.8.8.8 what should it be? It was previously the +net IP address.
Click to expand...
If you set it to 8888 it's not using the vpn

Jamesr said:
I use Xstreamity for VOD and catch-up but in trying to login I get an error as if the details aren’t recognised. I assumed this was because I wasn’t connected.
Click to expand...

If you put your login details into xtreamity and it won't connect then there's something wrong with your server/provider
 
pabloescaban said:
Did your provider give you an m3u or host, port, user and password?

Did you ask him if a VPN is allowed as most don't allow the use of a VPN if they have one server side

If you set it to 8888 it's not using the vpn



If you put your login details into xtreamity and it won't connect then there's something wrong with your server/provider
Click to expand...
Yes, the provider has provided this information. We tried a work around on the Nameserver settings after they confirmed everything was fine with the service. Using my phone also highlighted I couldn’t access the service. As soon as I tried a VPN on my phone it connected immediately.

The provider is aware of my move towards a VPN and suggested downloading the configurations from Nord and saving on the box. Dsayers script seemed a far easier approach for someone with limited experience like myself.

I will change back from 8.8.8.8, do I revert to the ISPs IP address as before?

On the xstreamity point, is there a way I can confirm the box is properly connected through the VPN? My username and password works fine on the client when using my phone through VPN.

I appreciate your assistance
 
Jamesr said:
Yes, the provider has provided this information. We tried a work around on the Nameserver settings after they confirmed everything was fine with the service. Using my phone also highlighted I couldn’t access the service. As soon as I tried a VPN on my phone it connected immediately.

The provider is aware of my move towards a VPN and suggested downloading the configurations from Nord and saving on the box. Dsayers script seemed a far easier approach for someone with limited experience like myself.

I will change back from 8.8.8.8, do I revert to the ISPs IP address as before?

On the xstreamity point, is there a way I can confirm the box is properly connected through the VPN? My username and password works fine on the client when using my phone through VPN.

I appreciate your assistance
Click to expand...
You don't go to nameserver settings at all.
Forget about it.
Reboot the box.
Start the VPN.
Put an IPTV channel on.
That's it.
If it's not working it's unlikely to be your ISP blocking it, unless you have those stupid settings on your broadband account, surfsafe, netnanny, etc, IPTV won't work with those activated.

When using your phone, are you using his dedicated Android app with user and password?

If so it's likely that he's changed his DNS (hostname) which isn't tied into the Android app
 
pabloescaban said:
You don't go to nameserver settings at all.
Forget about it.
Reboot the box.
Start the VPN.
Put an IPTV channel on.
That's it.
If it's not working it's unlikely to be your ISP blocking it, unless you have those stupid settings on your broadband account, surfsafe, netnanny, etc, IPTV won't work with those activated.

When using your phone, are you using his dedicated Android app with user and password?

If so it's likely that he's changed his DNS (hostname) which isn't tied into the Android app
Click to expand...
Thank you, I do believe there is an issue with the script now as it can’t find the bouquet when running it. I will need to raise this with the provider.

The safeguards are all turned off.

There isn’t a dedicated app but the client is accessed via URL and the username and password work.

I will assume the VPN is working and look into the IPTV bouquets with the provider

Thanks to you and everyone for the assistance it is very much appreciated
 
If it's e2m3u2bouquet script and using openatv 7.0 and above or ViX 6 you need the provider to update the script for python 3.

Alternatively uninstall e2m3u2bouquet from remove plugins the install e2m3u2bouquet from extensions and see if that works
 
dsayers2014 said:
If it's e2m3u2bouquet script and using openatv 7.0 and above or ViX 6 you need the provider to update the script for python 3.

Alternatively uninstall e2m3u2bouquet from remove plugins the install e2m3u2bouquet from extensions and see if that works
Click to expand...

Thank you I did try uninstalling and reinstalling last night but on installing the scrip it continues with same error. Hopefully the provider can assist with this. I think we are confident the VPN is working okay now thanks to your support :-)
 
dsayers2014 said:
Just checked script still should be working fine as config url hasn't changed

Code: 
https://d32d3g1fvkpl8y.cloudfront.net/heartbleed/windows/New+OVPN+Files.zip
Click to expand...
Hi, Thanks, I don't know if there's a problem with my PureVPN password etc. Got in touch with PureVPN but It appears to work on the chrome book and formuler z8 OK, but not on my engima 2 boxes???
 
dsayers2014 said:
Are you using the VPN credentials in your account area not account username and password?
Click to expand...
I have a "VPN password and username" that was working until a few days away, they still work on the chrome book. To access PureVPN on the PC i use the Website user and password. In your generator i have used the "VPN password", thanks.
 
tristansatki said:
I have a "VPN password and username" that was working until a few days away, they still work on the chrome book. To access PureVPN on the PC i use the Website user and password. In your generator i have used the "VPN password", thanks.
Click to expand...
I have tested VPN script and it looks like the folders within the zip file changed. Try again and let me know if it works or if you see any errors in terminus.
 
dsayers2014 said:
I have tested VPN script and it looks like the folders within the zip file changed. Try again and let me know if it works or if you see any errors in terminus.
Click to expand...
Hi, not working keeps getting LOGIN_FAILED, I have also downloaded the TCP and UDP files from PureVPN web, no luck.
 

Attachments

  • Screenshot (184).png
    Screenshot (184).png
    294.1 KB · Views: 2
  • Screenshot (186).png
    Screenshot (186).png
    424.7 KB · Views: 2
You must log in or register to reply here.
Back
Top
Flash Sale Popup