OpenATV Set Up Guide

[rallymarshal]

Tried to download filezilla last night but it wouldn't have it 🤔

 

[rapidwrinkly]

it's available in downloads from this site.

 

[rallymarshal]

it's available in downloads from this site.

Thank you 👍

 

[Ferret.]

Thank you 👍

If your struggling

DOWNLOAD

 

[rallymarshal]

If your struggling

DOWNLOAD

Interesting as was in there last night and when I went to download it, it kept bringing up another page which then wouldn't let me do anything, yet downloaded it straight away on my phone,
Learning new stuff keeps the brain active which it certainly doing with the nano 3t 😂

 

[rallymarshal]

Downloaded filezilla, entered box ip, selected ftp and wanted a password,
Tried winscp, same, tried a couple of different things, access denied, then tried changing to stfp and bingo, it worked, setup oscam then realised don't know how to use it so set up cccam, entered the cccam. Cfg and it worked then stopped then started and so on, using v239, on my old 5402 it was on V2.3.0,
Then had a go at oscam, did the online converter from c line to oscam, but got stuck after that so have up and went to bed 😂
It certainly a bit different to vix,
Will be further questions 👍 especially on how to enter my line into oscam

 

[Ferret.]

Downloaded filezilla, entered box ip, selected ftp and wanted a password,
Tried winscp, same, tried a couple of different things, access denied, then tried changing to stfp and bingo, it worked, setup oscam then realised don't know how to use it so set up cccam, entered the cccam. Cfg and it worked then stopped then started and so on, using v239, on my old 5402 it was on V2.3.0,
Then had a go at oscam, did the online converter from c line to oscam, but got stuck after that so have up and went to bed 😂
It certainly a bit different to vix,
Will be further questions 👍 especially on how to enter my line into oscam

Line goes in the ocsam.server file

Like this as the basics

[reader]
label = MyLine
protocol = cccam
device = your.server.com,port
user = username
password = password

 

[rallymarshal]

Line goes in the ocsam.server file

Like this as the basics

[reader]
label = MyLine
protocol = cccam
device = your.server.com,port
user = username
password = password

Thank you 👍
Where by will that be, is it in keys or is it hidden somewere 😁

 

[Ferret.]

Thank you 👍
Where by will that be, is it in keys or is it hidden somewere 😁

Will be in

etc/tuxbox/config

 

[rallymarshal]

Done all that and selected oscam 11717-r798, Restarted softcam and nothing, all in correct folder

 

[Ferret.]

Done all that and selected oscam 11717-r798, Restarted softcam and nothing, all in correct folder

What protocol is the line N or C. and what are you trying to clear channels wise ?

Have you logged into the Oscam Web interface to see if the line is active ?

Try config below with your line.

[reader]
label = CCcam
protocol = cccam
device = yourdns, port
user = ********
password = ********
inactivitytimeout = 30
disablecrccws_only_for = 0500:030B00,032830,050F00;098C:000000;09C4:000000;098D:000000;1708:000000;1811:003311;0E00:000000;092B:000000;0B01:000000;1813:000068;1884:000000;0E00:000000,050F00;098C:000000;09C4:000000,021110
ecmnotfoundlimit = 30
group = 1
disablecrccws = 1
cccversion = 2.1.1
cccmaxhops = 4
ccckeepalive = 1

 

[rallymarshal]

Looked at the bit where the ecm times, config, server, and nothing shows, mine is a c line and done the convert from c line to oscam, put it where it should be,
Did flash up to openatv 7.1 last night to see if that would help and still the same,
Does come up on 1 screen, something like webif oscam disabled, can't remember the exact words but looked on a couple of forums and it said it the port number but can't see 1

 

[rallymarshal]

What protocol is the line N or C. and what are you trying to clear channels wise ?

Have you logged into the Oscam Web interface to see if the line is active ?

Try config below with your line.

[reader]
label = CCcam
protocol = cccam
device = yourdns, port
user = ********
password = ********
inactivitytimeout = 30
disablecrccws_only_for = 0500:030B00,032830,050F00;098C:000000;09C4:000000;098D:000000;1708:000000;1811:003311;0E00:000000;092B:000000;0B01:000000;1813:000068;1884:000000;0E00:000000,050F00;098C:000000;09C4:000000,021110
ecmnotfoundlimit = 30
group = 1
disablecrccws = 1
cccversion = 2.1.1
cccmaxhops = 4
ccckeepalive = 1

This looks better than what I have

 

[Ferret.]

This looks better than what I have

You could PM me all you have in the config folder and ill take a look at it for errors if you like.

 

[rallymarshal]

Won't be home until 7om tonight 👍

 

[rallymarshal]

All that in the config folder is my converted line

 

[Ferret.]

All that in the config folder is my converted line

Ok ill send you some files to put in there but youll need to add your line manually don't use the convertor .

 

[urie]

All that in the config folder is my converted line

is there another folder in config folder normal ones from feeds secret feed are in subfolders others compiled from elsewhere usually just in config

 

[rallymarshal]

is there another folder in config folder normal ones from feeds secret feed are in subfolders others compiled from elsewhere usually just in config

It was blank, nothing in it,

 

[rallymarshal]

Ok ill send you some files to put in there but youll need to add your line manually don't use the convertor .

Thank you, starting to get the hang of it,
Working on a farm, more used to hitting things with a hammer than a keyboard 😂