Get the Best IPTV Service
Channels gone black on 19.2°E | Page 86 | Techkings
What's new
By:
Filters

Channels gone black on 19.2°E

kegnkiwi said:
It's there in front of you scroll down to oscam icam settings and they are in there :)
Click to expand...
what a nob i am blind cheers
i was on a aug list
i see its dated 10-10-24 that the latest

oh well got an updated Levi45 plug in at least , now for a Jan channel list
 
Last edited:
I've been running OpenATV 7.3 on my Ultimo4k for some time now with oscamicamnew_11777-ICAMEMU-Kitte888-V5Rev a while ago the box wouldn't find a new online image update, I left it be as the old saying goes, don't touch what's not broken.

Well yesterday my box started to reboot and freeze for no reason, so had to install a new image. Have OpenATV 7.5.1 on it now, got softcam setup and opening channels, but last time I setup the icam channels I blagged it by using a download from the Satvenus panel, that's no longer a option, I'm a little confused about what I need to do, just read most of this thread, and need a lie down. 🫢
 
Jerboa said:
I've been running OpenATV 7.3 on my Ultimo4k for some time now with oscamicamnew_11777-ICAMEMU-Kitte888-V5Rev a while ago the box wouldn't find a new online image update, I left it be as the old saying goes, don't touch what's not broken.

Well yesterday my box started to reboot and freeze for no reason, so had to install a new image. Have OpenATV 7.5.1 on it now, got softcam setup and opening channels, but last time I setup the icam channels I blagged it by using a download from the Satvenus panel, that's no longer a option, I'm a little confused about what I need to do, just read most of this thread, and need a lie down. 🫢
Click to expand...
Install this version of oscam: OSCam r11718-798
 
linesman66 said:
Reflash your image and try the bash file to
Update to the latest version of oscam .You
Can also install the whitelist or latest bouquets
Latest picions etc .Its kitties updated oscam version v11
Click to expand...

At the moment I've got OpenAtv 7.5.1 with 11777-ICAMEMU-Kitte888-V5Rev used this softcam as had icam working on my last image. I'm not sure what bash files is.
 
Jerboa said:
At the moment I've got OpenAtv 7.5.1 with 11777-ICAMEMU-Kitte888-V5Rev used this softcam as had icam working on my last image. I'm not sure what bash files is.
Click to expand...
Go to the plugin menu

Under "Setting Packages" install "ciefp-19e" that has the streamrelay channels
or go to the channel on 19.2, press up on the remote to bring up the channel list, Press Menu and select "Play Service With Stream Relay"
 
pieeater2015 said:
Go to the plugin menu

Under "Setting Packages" install "ciefp-19e" that has the streamrelay channels
or go to the channel on 19.2, press up on the remote to bring up the channel list, Press Menu and select "Play Service With Stream Relay"
Click to expand...

Yes on my previous image I could select stream relay to open icam, it's not working at the moment.

So I have a fresh ATV 7.5.1 image, and I found this Icam Auto Installation Script - Latest Oscam | Europe CCcam Server

Icam auto installation script (V1) – Latest update – All images​


The following steps are only possible with a working internet connection:
  1. Open the receiver’s web interface. (Enter the receiver’s IP into the browser)
  2. Click on Terminal (Bottom left )
  3. Enter login and password (root / blank ) or use your own password. (If you dont remember your password, change password under Menu button > Settings > System > Network > Password )
  4. Insert the following command : wget -qO- cccam.eu/icam-script | bash
  5. Confirm with enter
  6. An installation screen appears
  7. Select point 1 (Install Icam Oscam stable).
  8. Then choose your image, e.g. OpenATV
  9. The softcam is installed, then end the process with 0-Back/Exit.
  10. The receiver will automatically restarted
  11. Installation is ready, now all you have to do is insert your server on oscam.server file from web interface.
So I've been able to download the oscam and add my line to it, now only opening non icam channels, so I'm obviously missing something.
What files and where do I need to add?
 
Jerboa said:
Yes on my previous image I could select stream relay to open icam, it's not working at the moment.

So I have a fresh ATV 7.5.1 image, and I found this Icam Auto Installation Script - Latest Oscam | Europe CCcam Server

Icam auto installation script (V1) – Latest update – All images​


The following steps are only possible with a working internet connection:
  1. Open the receiver’s web interface. (Enter the receiver’s IP into the browser)
  2. Click on Terminal (Bottom left )
  3. Enter login and password (root / blank ) or use your own password. (If you dont remember your password, change password under Menu button > Settings > System > Network > Password )
  4. Insert the following command : wget -qO- cccam.eu/icam-script | bash
  5. Confirm with enter
  6. An installation screen appears
  7. Select point 1 (Install Icam Oscam stable).
  8. Then choose your image, e.g. OpenATV
  9. The softcam is installed, then end the process with 0-Back/Exit.
  10. The receiver will automatically restarted
  11. Installation is ready, now all you have to do is insert your server on oscam.server file from web interface.
So I've been able to download the oscam and add my line to it, now only opening non icam channels, so I'm obviously missing something.
What files and where do I need to add?
Click to expand...
Do the settings in webif need changing?
 

Attachments

  • Screenshot (2).png
    Screenshot (2).png
    250.7 KB · Views: 6
Jerboa said:
Tried that, ncam is running fine but not in icam, what is it I'm missing?
Click to expand...

Put a streamrelay channel on.open the ncam web browser. What does the log say?

Myself would just start again.
Install ATV 7.4
Setup with the wizard
Set a password to be able to connect
Install the channel list from plugins
Add Ncam and your line
Once working
Then set epg and picons
 
Last edited:
You must log in or register to reply here.
Back
Top
Flash Sale Popup