Get the Best IPTV Service
Zgemma box will flash and boot but no picture | Page 2 | Techkings
What's new
By:
Filters

Zgemma box will flash and boot but no picture

And you did try another power supply?
Box was powered off at rear first usb inserted and box on and button pressed/held to start the process?

Is that a box that needs noforce to force ?
 
cactikid said:
And you did try another power supply?
Box was powered off at rear first usb inserted and box on and button pressed/held to start the process?

Is that a box that needs noforce to force ?
Click to expand...
Yes different power supply but not with all USB’s, power off insert usb turn on says usb press power on front says flsh then goes to boot starts loading opentv then scrambled screen stuck, it’s consistent
 
Max size 8gb

You not said if you renamed a file from noforce to force?

Have you been using the same file to flash box with and have you tried a previous version?
 
Last edited:
Don’t know what ur on about now, I have flashed this box with the same file I flashed it with last time it successfully flashed? Why would I need to re-name something? Serious question I’m interested
 
foghorn27 said:
Are u on about openatv file
Click to expand...
You need a new version of openatv.
Trying to flash an antiquated version is a waste of time.
Make sure USB is formatted first.
Hold the standby button in when you power on with white button.
Only remove finger from standby when it starts flashing the image
 
Yes as I have done before with no issues, like I said if it was failing at different stages I would think possible usb/file issue but it’s consistent in when it fails which is the boot up process after indicating it was flashing that’s why I wanted to reflash it the first place. If u want a project I’ll send it u and if u get it up and running do wot u like with it ... I need a rest
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup