WooshBuild Wooshbuild

[jonnymac67]

Please someone bring back wooshbuild it was by far the best per built image.
Just a thought

 

[grog68]

Please someone bring back wooshbuild it was by far the best per built image.
Just a thought

It won't happen, I don't think Woosh tampers too much with boxes these days.

 

[pabloescaban]

Please someone bring back wooshbuild it was by far the best per built image.
Just a thought

The builds that worked on openatv, woosh, grog etc still work but only on old images, openatv 6.4 or below.
This is because openatv changed from python 2 to python 3 after 6.4
Builds won't work on python 3.
There's not much you can't add yourself that the builds provided...you can flash plain openatv and add your own bits and pieces

 

[bigwig21]

Please someone bring back wooshbuild it was by far the best per built image.
Just a thought

If you want an image that runs the latest python, willobuild is the closest you'll get and is up to date as well.👍

 

[Abu Baniaz]

The "Builds" were are just customisations/pre-installations on top of images. If you know what you want from the "builds", you can install it yourself and configure accordingly.

 

[jonnymac67]

Yes I know all of this, I have been messing about with enigma and enigma 2 for years, I was just saying woosh worked very well

 

[rizzo1976]

Hi,

I was hoping you could provide some support. I was currently on 6.4 which has gone EOL and was experiencing some issues so I flashed the lasted Nightly build of 7.2 and then used terminal to load Woosh. However Woosh now gets stuck at building on my Tiviair Box at 49% and does nothing. I've tried to reflash thinking it was an issue with the latest nightly build back down to 6.4 but it won't let me resulting in the attached error. Do you have any advice on how I can resolve this please?

Appreciate it.

 

[moshibeth]

Hi,

I was hoping you could provide some support. I was currently on 6.4 which has gone EOL and was experiencing some issues so I flashed the lasted Nightly build of 7.2 and then used terminal to load Woosh. However Woosh now gets stuck at building on my Tiviair Box at 49% and does nothing. I've tried to reflash thinking it was an issue with the latest nightly build back down to 6.4 but it won't let me resulting in the attached error. Do you have any advice on how I can resolve this please?

Appreciate it.

You should really do some reading up before flashing these pre builds. Whoosh has had no support for the last 5 years or more and its not compatible with python 3 which open atv 7.2 uses. What box are you using i suggest a usb flash to wipe the box clean.

 

[rizzo1976]

You should really do some reading up before flashing these pre builds. Whoosh has had no support for the last 5 years or more and its not compatible with python 3 which open atv 7.2 uses. What box are you using i suggest a usb flash to wipe the box clean.

Damn, but when I try to flash back to 6.4 I still get that error I posted. I'm using the USB flash to get back to 6.4 I've got a Tiviair

 

[moshibeth]

Damn, but when I try to flash back to 6.4 I still get that error I posted. I'm using the USB flash to get back to 6.4 I've got a Tiviair

Bricked your box you have pal. Use a genuine 16BGB or less sandisk usb they always work.