Get the Best IPTV Service
WooshBuild v3.00 + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1 | Page 54 | Techkings
What's new
By:
Filters

WooshBuild v3.00 + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1

Status
Not open for further replies.
Good Morning!

Put this build on last night after i had issues with Vix 4 on my H.2S.

Build process was fine, I ftp'd my files into keys and running well.

One question, is it possible to change the skin on this build, i'm not a massive fan of Slyk and really liked the Vix stock skin so wanted too try a few different ones out, is there anything to note.

Also, can you advise how i can add Dreamplex to the Portal?

Thanks in advance,

James.
 
Rainey said:
Good Morning!

Put this build on last night after i had issues with Vix 4 on my H.2S.

Build process was fine, I ftp'd my files into keys and running well.

One question, is it possible to change the skin on this build, i'm not a massive fan of Slyk and really liked the Vix stock skin so wanted too try a few different ones out, is there anything to note.

Also, can you advise how i can add Dreamplex to the Portal?

Thanks in advance,

James.
Click to expand...

This isn't strickly a WooshBuild questions as WooshBuild comes with the Slyk skin.

You can find skins in the plugin browser (green button) and then use Menu -> Setup -> Usage & GUI -> Skin setup - and select the skin you want to swap to.

As for finding the skins and installing them, have a look at Kiddac's Slyk skin thread or Chubs' SkyQ skin thread as they will tell you in the first post how to install skins manually.

Other than that, please start a new thread with your questions.
 
Thanks for the response. The missus has now seen the SlyK skin and loves it along with the build so looks like it's staying.

Good job once again.

James.
 
First of all - huge thanks to Whooshman for the great build - the online install etc and usb line installer are spot on.

I have just upgraded to h2s from 2s and have followed Whooshmans instructions for setting up. I havnt used autobouqets E2 before - i had Sucmnsee vix on my old 2s and used autobouqet maker.

My problem is that E2 creates the bouqets but upon pressing EPG you dont get the list of bouqets in groups (sport kids music etc etc) - there doesnt seem to be a way to access so you have to scroll through the lot. What do i need to change to create bouqet groups?

Thanks in advance.
 
I am not sure what you have both done on your H2S boxes but WooshBuild already has the bouquets created. You move between them using the Prev and Next buttons. The only settings in Autobouquet E2 which needed changing was your region as everything else is setup.

By pressing the EPG button on your remote you will see:

1_0_19_1B1D_802_2_11A0000_0_0_0.jpg

If you are pressing the TV button and not the EPG button, press the Blue button twice to get to the Bouquets.

1_0_1_C48B_811_2_11A0000_0_0_0.jpg

The above has been standard since WooshBuild v1.
 
wooshman said:
I am not sure what you have both done on your H2S boxes but WooshBuild already has the bouquets created. You move between them using the Prev and Next buttons. The only settings in Autobouquet E2 which needed changing was your region as everything else is setup.

By pressing the EPG button on your remote you will see:

View attachment 17510

If you are pressing the TV button and not the EPG button, press the Blue button twice to get to the Bouquets.

View attachment 17511

The above has been standard since WooshBuild v1.
Click to expand...

Thanks Whooshman - didnt realize that prev and next buttons scrolled top boxes - cheers for that - spot on :)
 
Hi all,

Managed to install the above build on a new H2H box and also added the requirements for cable.

Thank you all so much for this.

Although I do have one question and I have followed the above instructions thoroughly.

I can get the EPG up but there are no images. I have spoken to cam provider who said it is working.

Any help would be much appreciated as the build looks like it is working.

regards BL.
 
BlazeLegion said:
Hi all,

Managed to install the above build on a new H2H box and also added the requirements for cable.

Thank you all so much for this.

Although I do have one question and I have followed the above instructions thoroughly.

I can get the EPG up but there are no images. I have spoken to cam provider who said it is working.

Any help would be much appreciated as the build looks like it is working.

regards BL.
Click to expand...
You should be getting BBC1, 2, 3, 4, 5 regardless of a line being present ot not, certainly on the Sat tuner anyway. Sadly as I can't actually use a H2H due to no cable feed it is hard to help as I don't have any idea when it comes to VM.

I sure there will be a H2H user along soon enough.
 
Thanks for the prompt response Wooshman,

I read somewhere that there is no free channels on VM. So hopefully someone can advise further. As everything looks like it has been installed correctly.

BL

---------- Post Merged at 08:39 PM ----------

Wooshman,
I was given a new cccam and it still did not work.

I have also rechecked the process from your posts and it appears that I have followed it properly.

Any ideas would be welcome.
BL.
 
Last edited:
thanks Wooshman for this download. someone recommended this to me so I installed it onto my Zgemma H.2s box after having problems installing my lines on the box which came with openvix installed. Now running this wooshbuild, im enjoying it, was sooooo easy to follow instructions. easy to install lines and soo much. thanks once again wooshman. there was a point where i didnt get option to change my tv region and was setup for Meridean South East and also the Autobouquets Blue box layout was different to the 1 you showing. Now i dont have option to change me tv region when i go to Autobouquets section but other than that everything went well. so is there a way to change it as ive only just had this box over 2 days ago and still learning. thanks in advance.
 
hi mate, ive done everything and working now but my volume has stopped working. i followed your advice and put volume up as you said you build at night so i have done that, but before this i was using vix image and just before pflashing yours on it stopped. please could you advise of what i can do?
 
uwaiskomal12 said:
hi mate, ive done everything and working now but my volume has stopped working. i followed your advice and put volume up as you said you build at night so i have done that, but before this i was using vix image and just before pflashing yours on it stopped. please could you advise of what i can do?
Click to expand...

I am guessing you restarted the box? And still had no sound after a reboot?
 
wooshman said:
uwaiskomal12 said:
hi mate, ive done everything and working now but my volume has stopped working. i followed your advice and put volume up as you said you build at night so i have done that, but before this i was using vix image and just before pflashing yours on it stopped. please could you advise of what i can do?
Click to expand...

I am guessing you restarted the box? And still had no sound after a reboot?
Click to expand...

Yes restarted many times. Sometimes there isnt even a picture on screen, until i remove the hdmi, put box on standby, insert hemi and turn on from standby. But i do not get sound at all...

I also tried the same box in another tv it worked fine and another zgemma on the problematic tv and same again. So i was thinking its the tv, but then i checked my freeview channels and they work perfectly fine?!! I am bamboozled
 
uwaiskomal12 said:
wooshman said:
uwaiskomal12 said:
hi mate, ive done everything and working now but my volume has stopped working. i followed your advice and put volume up as you said you build at night so i have done that, but before this i was using vix image and just before pflashing yours on it stopped. please could you advise of what i can do?
Click to expand...

I am guessing you restarted the box? And still had no sound after a reboot?
Click to expand...

Yes restarted many times. Sometimes there isnt even a picture on screen, until i remove the hdmi, put box on standby, insert hemi and turn on from standby. But i do not get sound at all...

I also tried the same box in another tv it worked fine and another zgemma on the problematic tv and same again. So i was thinking its the tv, but then i checked my freeview channels and they work perfectly fine?!! I am bamboozled
Click to expand...

If the problem didn't move with the box to the other TV it is not WooshBuild. Bad HDMI lead? Try the one from the Good TV in the bad TV.
 
Yes restarted many times. Sometimes there isnt even a picture on screen, until i remove the hdmi, put box on standby, insert hemi and turn on from standby. But i do not get sound at all...

I also tried the same box in another tv it worked fine and another zgemma on the problematic tv and same again. So i was thinking its the tv, but then i checked my freeview channels and they work perfectly fine?!! I am bamboozled[/QUOTE]

If the problem didn't move with the box to the other TV it is not WooshBuild. Bad HDMI lead? Try the one from the Good TV in the bad TV.[/QUOTE]

I defo know the problems not with the build which btw unbelievable. Never thought inwould use openatv but uve converted me. Ease and brilliance, thanks for your efforts with that. In regards to sound was wondering if its a common fault/issue with zgemmas etc
 
Status
Not open for further replies.
Back
Top
Flash Sale Popup