Get the Best IPTV Service
Viark - VIARK TYPE BOXES | Page 457 | Techkings
What's new
By:

Viark VIARK TYPE BOXES

neolxs said:
Went to my supplier to grab another viark 4k for my dad, they are out of stock. it seems everyone is out of stock! Got mine just in time it seems, but strange everyone is out of stock all of a sudden.

Might have to be a GTmedia option. ive Just spent the last few days setting up my channel list, can this be put onto the GT Media V8 or is it going to be another pain to set up a channel list!
Click to expand...
In stock in Spain for immediate delivery
 
Last edited:
NEWS:

CS.149 Enhanced Server Features

Previously, DDoS attacks and IP blocks caused frequent disruptions. The latest improvements

on the last 2nd server address these issues with the following key features:

1. Anti-Attack Protection – Enhanced defenses against DDoS and malicious traffic.

2. IP Block Prevention – Maintains connectivity even under IP-based restrictions.

3. No VPN Required – Ensures stable access without relying on VPN services.

Even if the last server disconnects and loses channel color, the last 2nd server will remain fully operational.

IP blocks primarily occur in Iran, Turkmenistan, and Angola. These regions will get the software firstly.
 
bert72 said:
Yes, so long as the connector is the correct size and it has centre pin power. Could also use a 2amp supply
Click to expand...
Hi going back to this
I found a plug from a recent gigabit switch or other device that I'm not using however on the plug it says output is 12.0v 3.0a.

Is this safe to use for the viark 12.0v 1.5a?
 
joysleep1 said:
Hi going back to this
I found a plug from a recent gigabit switch or other device that I'm not using however on the plug it says output is 12.0v 3.0a.

Is this safe to use for the viark 12.0v 1.5a?
Click to expand...
If it physically fits and positive is on the middle pin its safe to use.

Don't worry about the amps been higher the Viark will only draw what amps it needs.

I dont use the Viark PSU's they are weak particularly if your using a motorised dish on one.
 
Ferret. said:
If it physically fits and positive is on the middle pin its safe to use.

Don't worry about the amps been higher the Viark will only draw what amps it needs.

I dont use the Viark PSU's they are weak particularly if your using a motorised dish on one.
Click to expand...
Oh I plan to use viark for motorised soon so which power supply would you recommend?
 
joysleep1 said:
Oh I plan to use viark for motorised soon so which power supply would you recommend?
Click to expand...
I also have a 20v 1.2a plug that's fits but didn't test it cos I thought the voltage was too high.
Between the two that I've mentioned which one makes more sense to use with a motorised dish?
I'll keep my viark one at my father in laws place cos that would only me used for fixed dish
 
joysleep1 said:
I also have a 20v 1.2a plug that's fits but didn't test it cos I thought the voltage was too high.
Between the two that I've mentioned which one makes more sense to use with a motorised dish?
I'll keep my viark one at my father in laws place cos that would only me used for fixed dish
Click to expand...
Do not use the 20v psu
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup