Get the Best IPTV Service
Vaping chat- anything related to vaping | Page 34 | Techkings
What's new
By:
Filters

Vaping chat- anything related to vaping

bazcfc1 said:
Think I’ve sussed it now lol for sub ohm tank it should be more vg then pg not other way round.
I will make a tester up with more vg then pg and see how that is later on
Click to expand...
You would need at least 60vg for sub ohm.
All MTL juice is usually 50/50 because it needs to be thin as the coils are tiny in comparison to sub-ohm coils.
You can add distilled water and sweetener to your juice but the downside to sweetener is it kills your coils quicker.
 
Snap! what coils are you using?
I've just stuck a couple of my MTL 0.5 claptons in to try it but had to stretch them a bit.
I've got some new tanks coming tomorrow.

1648568900351.png
 
Willo3092 said:
Snap! what coils are you using?
I've just stuck a couple of my MTL 0.5 claptons in to try it but had to stretch them a bit.
I've got some new tanks coming tomorrow.

View attachment 74147
Click to expand...
I'm using the coils that come with my drop RDA they fused Clapton's or staple fused 3mm ni80.
They not to bad tbh come out at 0.19 in dual coil.

You may need some bigger coils depending on the RDA you use.
 
Willo3092 said:
It is working okay but hopefully getting a bottom feed MTL tank tomorrow.
I haven't tried squonking yet because all my juice is high strength MTL so just been drip feeding to try it.

It's a pity my digiflavor MTL tank isn't a squonker because I'm loving it!

I've also ordered an £8 mod to practice on :smiley:
It's a mech mod so will have to watch my ohms law!

VANDY VAPE PULSE BF SQUONK BOX MOD - Products - E-Cigs clouds - E-Cigarette Kits, E-Liquid, Vape Supplies
Click to expand...
There might be a squonk pin in the box for the RDA your already using.

The mech pulse is good use a small single coil RDA on it 👍
 
The druga 2 did, that's what I'm using now. It was the Digiflavor Siren V4 MTL RTA that didn't. It's a standard MTL RTA tank but I'm loving it so far.
Best flavour out of any tank I've tried including the 7 years I vaped previously.
 
Last edited:
Willo3092 said:
The druga 2 did, that's what I'm using now. It was the Digiflavor Siren V4 MTL RTA that didn't. It's a standard MTL RTA tank but I'm loving it so far.
Best flavour out of any tank I've tried including the 7 years I vaped previously.
Click to expand...
Ah right I thought you meant the druga.
You won't be able to use rta's for squonking only RDA's usually.
 
I'm loving my new squonk mods :smiley:
8ml tank and 10ml tank - saves fannying about topping up all the time (y)
I've set the Vandy Vape PULSE V2 + GeekVape Z RDA up as DTL with 6mg banana flavour.
The Dovpo is set up with a berserker MTL tank and 18mg coffee flavour :coffee:.

I've still got the Pulse BF Box Mod to play with yet :smiley:

1648669020888.png
 
Willo3092 said:
I'm loving my new squonk mods :smiley:
8ml tank and 10ml tank - saves fannying about topping up all the time (y)
I've set the Vandy Vape PULSE V2 + GeekVape Z RDA up as DTL with 6mg banana flavour.
The Dovpo is set up with a berserker MTL tank and 18mg coffee flavour :coffee:.

I've still got the Pulse BF Box Mod to play with yet :smiley:

View attachment 74179
Click to expand...
Thought that said 900w till I enlarged image 🤣🤣🤣 and seen the point in middle
 
Willo3092 said:
I'm loving my new squonk mods :smiley:
8ml tank and 10ml tank - saves fannying about topping up all the time (y)
I've set the Vandy Vape PULSE V2 + GeekVape Z RDA up as DTL with 6mg banana flavour.
The Dovpo is set up with a berserker MTL tank and 18mg coffee flavour :coffee:.

I've still got the Pulse BF Box Mod to play with yet :smiley:

View attachment 74179
Click to expand...
I see you went vandy vape they are my favourite vape company.
The pulse screen looks similar to my guar 21.

There's a new beserker rta out called the b3 vaping with Vic reviewed it last week.
I have the mini 2 beserker somewhere
 
I think it's the original berserker. I bought 2 for £6.99 each (y)

Got my VANDY VAPE PULSE BF SQUONK BOX MOD up and running today. O.5 - 0.6 ohm seems sweet for me :smiley:
It's not a squonking atty though. I've got to put a new coil in one of my RDA's.


1648722373414.png
 
Willo3092 said:
I think it's the original berserker. I bought 2 for £6.99 each (y)

Got my VANDY VAPE PULSE BF SQUONK BOX MOD up and running today. O.5 - 0.6 ohm seems sweet for me :smiley:
It's not a squonking atty though. I've got to put a new coil in one of my RDA's.


View attachment 74202
Click to expand...
Nice little collection you got there.
Here's a pic of my guar 21 screen it looks the same....does the pulse V2 have this option two see the pic with the option to tailer it to your style of vaping.
IMG_20220331_142038.jpg
 
No just the usual settings plus some ones I'm not sure about - hibernate etc :unsure:
I've put a Berserker MTL RDA on the pulse mech mod with a 1.0 ohm coil and it's very nice (y)

1648740789179.png
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup