Is the nicotine salts base Pg or VG? Or is it 50/50 based?Maybe there is something wrong with my recipe but I don't know what?
Amount to Produce = 50ml
VG/PG Ratio = 30/70
Desired nicotine strength = 20
Nicotine base strength = 18mg
Blackjack flavour = 10%
Yes, my base liquid is 30/70 and the nic shots are 50/50.Is the nicotine salts base Pg or VG? Or is it 50/50 based?
Your premix base is 70/30 I can see so maybe that's why there's an error in the calculations.
Because your adding nicotine to the 70/30 base. Your adding more Pg..VG or both to the base. So you won't achieve 70/30 it will for example it if your base is 100% VG your ratio will adjust to say 80/20.
I just thought I would make a small test sample in case I didn't like it.I wouldn't worry too much about 60/40 or 70/30 if doing such a small mix.
It makes virtually no difference to the end result unless you are doing big mixes that last you weeks.
If just doing a day or two worth of liquid it doesn't matter
Nicotine salts are a lot stronger than regular nicotine.Yes, my base liquid is 30/70 and the nic shots are 50/50.
It'll probably make you dizzy and nauseous but it's up to you.I just thought I would make a small test sample in case I didn't like it.
I don't want to waste my precious nicotine in my hour of need
So is the above small recipe okay?
I've got a few kits but I think my Aspire Atlantis sub-ohm (on the left) is the favourite but I use it MTL rather than DTL.Nicotine salts are a lot stronger than regular nicotine.
If vaping with a sub ohm tank I'd be wary how much I add as salts are usually used in mtl tanks in thinner juice.
It is recommended you use no higher than a 6mg in sub ohm tank as your inhaling a lot of vapour and nicotine as opposed to the tight draw from a mtl vape which is tight like a cigarette.
Nearly as bas as me for mods 🤣🤣🤣I've got a few kits but I think my Aspire Atlantis sub-ohm (on the left) is the favourite but I use it MTL rather than DTL.
View attachment 71700
If your using mtl aim for 50/50 juice.I've got a few kits but I think my Aspire Atlantis sub-ohm (on the left) is the favourite but I use it MTL rather than DTL.
View attachment 71700
I use 50/50 with dtl but have a dtl tank and mod for big clouds lolIf your using mtl aim for 50/50 juice.
Higher VG content is thick while it will wick in some tanks with stock coils.
It will burn them out quicker using thinner juice will help with wicking and be a more enjoyable vape.
That works the other way if the juice is thin it wicks much quicker and pulls more juice through the cotton to the coil/coils.I use 50/50 with dtl but have a dtl tank and mod for big clouds lol
Yeah can be expensive on coils when I use normal mixed liquid I use 1.8 k3 aspire coils and tank.That works the other way if the juice is thin it wicks much quicker and pulls more juice through the cotton to the coil/coils.
70/30 at least in a sub ohm tank especially if your using stock coils. Your coils will last longer saving you even more money in the long run 👍
Stock coils usually have a recommended wattage.Yeah can be expensive on coils when I use normal mixed liquid I use 1.8 k3 aspire coils and tank.
Or if you have the wattage too high will burn the coils out also.
I had a go at that before but it was a bit fiddly for my sausage fingers. Still got mesh and wire somewhere.Stock coils usually have a recommended wattage.
I use rebuildables myself I tend to use either pre made coils or buy wire and make my own.
The money you save in long run is great.
And also you get a better vape from rebuildables as you can use any wire or coil of your choice and tailor it to your liking.
How long does my little cocktail have to stand before I treat myself to a lungful?So for a small test sample I need:
1 x 10ml nic salt
1 x 1ml flavour concentrate
Maybe 2ml of base liquid.
Should say on the bottle steep time.How long does my little cocktail have to stand before I treat myself to a lungful?
Limited time offer