Feed Discussion Satellite Feeds FTA & Biss Key Discussion Thread.

[Kurdt Kobain]

TNT or Dazn which one has better commentary?

Just tried but was unable to get any of the other ones on 16e or any on 7e with my 80cm dish.

Similarly I only managed to get the one feed for the first fight (also on 16e) but was all I needed.

 

[Accelerated_Dragon]

Just tried and was unable to get any of the other ones on 16e or any on 7e with my 80cm dish.

Try 10e . That has slightly stronger signals i think. It is also Dazn feed.

 

[Kurdt Kobain]

Try 10e . That has slightly stronger signals i think. It is also Dazn feed.

Just tried 11275 V 7200 on 10e but nothing received unfortunately. Will stick with the TNT one on 16e now that it's started. :)

 

[Accelerated_Dragon]

Just tried 11275 V 7200 on 10e but nothing received unfortunately. Will stick with the TNT one on 16e now that it's started. :)

Come on Fury !

 

[spleenmuncha]

Try manual adjustment through Advanced Tuner and not via USAL. Are you getting any of 16E channels ?

Whilst it didn't help me for last night, I took your advice this morning and looked for this setting.

By nudging the dish West several times, I do manage to increase the Quality on existing TPs from maybe 55% up to 65% approx. (Does that mean my dish is out of alignment? and if so, is it a manual fix to the dish/motor or is it a softeware/box fix?)I then press down to "Save" but it seems when I exit back out, the signal just returns to the original 55% mark. Is there a guide or anything that anyone knows of that I might be able to check out to see if I'm doing things right?

 

[Accelerated_Dragon]

Whilst it didn't help me for last night, I took your advice this morning and looked for this setting.

By nudging the dish West several times, I do manage to increase the Quality on existing TPs from maybe 55% up to 65% approx. (Does that mean my dish is out of alignment? and if so, is it a manual fix to the dish/motor or is it a softeware/box fix?)I then press down to "Save" but it seems when I exit back out, the signal just returns to the original 55% mark. Is there a guide or anything that anyone knows of that I might be able to check out to see if I'm doing things right?

Yes that suggests your dish is out of alignment (same as mine). This is hardware related and not software.

I am assuming your using an E2 box. Settings are same for E2 boxes but menu may be different by choice of your image.

Normally, under tuner advanced settings you can change the choice from USAL to Disec 1.2 . This will let you store the positions once you manually adjusted. If you search on the fourm someone would have done a detailed answer on this topic.

Other trick is you can change your USAL coordinates to cheap the motor. That can improve the signals . All part of fun.

Search this fourm you will see all these. Post in correct section about motorised dish and some one will guide you.

Cheers

 

[spleenmuncha]

Yes that suggests your dish is out of alignment (same as mine). This is hardware related and not software.

I am assuming your using an E2 box. Settings are same for E2 boxes but menu may be different by choice of your image.

Normally, under tuner advanced settings you can change the choice from USAL to Disec 1.2 . This will let you store the positions once you manually adjusted. If you search on the fourm someone would have done a detailed answer on this topic.

Other trick is you can change your USAL coordinates to cheap the motor. That can improve the signals . All part of fun.

Search this fourm you will see all these. Post in correct section about motorised dish and some one will guide you.

Cheers

Thanks. I actually only really use a Viark SAT 4K now, but whilst playing about today, I did plug back in my Vu+ Solo2 Box (Engima2). I managed to balls everything up and completely lost signals, but somehow seem to have got it back. I'll take a look at Disec 1.2 then. Never looked at that before. Thanks. I'll also find the correct section !

 

[BlueR12345]

Playing about with my new viark on 28.2 did a blind scan at 11:00

Theres a biss feed showing EDS807HD.1

12693 V 9598

I notice from googling the same freq was used for Carabao Cup in 2017

Possible placeholder for semi finals next week ?

 

[manic01]

Playing about with my new viark on 28.2 did a blind scan at 11:00

Theres a biss feed showing EDS807HD.1

12693 V 9598

I notice from googling the same freq was used for Carabao Cup in 2017

Possible placeholder for semi finals next week ?

No

 

[danilonffc]

There is a feed for the dart tonight.

Premier League Darts 2025 - Night 1 (SSE Arena, Belfast)

Eutelsat 7A/B/C @ 7.0°E
12727 - V - 7200 |4:2:0
1920*1080 - DVB-S2 - 8PSK
ID: 2025 Premier League Darts
#CW: D9 51 AB D5 CA 34 78 76

There's one on 28.2e in the relevant section too.

 

[weimaraner95]

There is a feed for the dart tonight.

Premier League Darts 2025 - Night 1 (SSE Arena, Belfast)

Eutelsat 7A/B/C @ 7.0°E
12727 - V - 7200 |4:2:0
1920*1080 - DVB-S2 - 8PSK
ID: 2025 Premier League Darts
#CW: D9 51 AB D5 CA 34 78 76

Yep just spotted that from Dani Sat

 

[gaz82]

There's one on 28.2e in the relevant section too.

There is, but it's 4:2:2 so not viewable on a standard box.

 

[weimaraner95]

There's one on 28.2e in the relevant section too.

But thats 4:2:2

 

[kegnkiwi]

But thats 4:2:2

Its available if you can do it. :) Thats the 4.:2:2 feed on 28.2e

 

[weimaraner95]

It's on Sky Showcase

 

[weimaraner95]

Its available if you can do it. :) Thats the 4.:2:2 feed on 28.2e

Which receiver is that on

 

[kegnkiwi]

Which receiver is that on

To be honest i could do it on my qviart dual on the E2 side but as i had the the qviart turned off if i did it on the gigablue and streamed it to my laptop. I could have also of got the 7e thread on the 4:2:0 without streaming it.

 

[davyc007]

I have eventually picked up a feed on 16e. I have audio but no video- just continually cycling through updating Biss key, please wait then update ok. Still no video. Do I just wait? Cheers.
16e
12614 H 15000 FEC - auto

 

[davyc007]

This is for feeds only
Just for info 16e feed is 4:2:2 format
Discussion thread is here my friend

Feed Discussion Thread 'Satellite Feeds FTA & Biss Key Discussion Thread.'

Sep 28, 2023

Something I have never actually used , how do you add them to your e2 receiver,
Noticed too late some footy last night got put up but unless it's FTA then I don't know what to do .

Last time I messed with keys was on old dbox2
Oh and what about Biss on GT media v8uhd

Thanks

• weimaraner95
• Replies: 142
• Forum: Biss Feed Keys / FTA Feeds / Feed Hunter

Ah man thought I was going to get a working one for once. Ha. Thanks. Apologies for spamming thread. I’m sure an admin will remove it for me.

 

[Ferret.]

Ah man thought I was going to get a working one for once. Ha. Thanks. Apologies for spamming thread. I’m sure an admin will remove it for me.

Fine on this thread mate ive move your posts. Its the discussion thread.

Got both the 7e and 10e feeds posted by manic01 working here im watching the 7e feed.