openbox as a server

[steveecourt]

is it possible to use the openbox as a cardsharer so i can use another openbox in another room.

thanks in advance

 

[bobby123]

1. Press "Menu"
2. Scroll down to "Network Local Setting"
3. Press "OK" on remote
4. Arrow right to "Newcamd Server Settings"
5. Press "OK" on remote
6. Enter newcamd server parameter
7. Server setting -ON-
8. TCP Port -eg. 13000- this MUST be forwarded in your router
9. Des Key 01 02 03 04 05 06 07 08 09 10 11 12 13 14 (Can be change to your own)
10. Add USER in Newcamd server User manager with green button on remote
11. Add username PASSWORD "Allow emm YES"
12. Press yellow to save the configuration .

Now box is setup for server with 1 client and a reboot is always a good idea .

In the Client box with CCcam its the N: line to use for acces the server eg
N: server_ip_or_dns 13000 USER PASSWORD 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
THANKS TO mutz nutz

 

[bob14]

hi
from post above
In the Client box with CCcam its the N: line to use for acces the server eg
N: server_ip_or_dns 13000 USER PASSWORD 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

the 256 on the end is not needed

Just something I have found that using a static ip address works better for internal share
If you are using a static ip address instead of DHCP setting
On the openbox s9


Default gateway .DNS Primary and DNS Secindary must be that of the router being used
(or the severs recivers ip address If reciver to reciver)

Hope this may help

 

[Gildea88]

Hi
I am in the same position want to know how to share by card.
Can u link me the software u need to download onto comp and a guide on what to do?
Cheers mate!