Is there any tutorial for Install a sky de bouquet for icam and how to Install ncam with Icam patch?

[Ferret.]

The DE Channels are FHD not UHD.

 

[sammer]

I have check the lyngsat i can not see uhd channels list

 

[sammer]

sometimes i have to wait 30 sec for channels to open on 19.2 e
is that just normal?

 

[Ferret.]

sometimes i have to wait 30 sec for channels to open on 19.2 e
is that just normal?

Your server seems a tad slow, but yes that is stream relay and a older CPU for you

 

[linesman66]

Tips & Help:
If the picture stays dark and the log says "Found", something went wrong during installation, it's not the fault of cccam.to! flash again if necessary!

Should there ever be stagnation, sound gone or something similar! reboot box. we suspect that there is a bug in the software!

MIPSEL hardware is not 100% compatible. Some devices tend to have 100% CPU utilization, so the ECM times are very high and it stalls! Often only better hardware can help here, e.g. VU+ Zero 4k

When switching from Sky to HD or similar, the switching time is very long, this is because the hardware does not enable the tuner, here it helps if you have switched to pressing OK twice
in the channel list on the channel you want to watch!

 

[spanner123]

I'm using a Vu+ solo2 and it all works fine. I found ncam 13.5 to be much better than osacm icam v9. Channels clear quicker and much less freezing.

 

[sammer]

I'm using icam and newest ncam on vu plus duo 2 atv 7.0.
I have to wait sometimes up to 40.50 sek on some channels.

 

[pabloescaban]

I'm using icam and newest ncam on vu plus duo 2 atv 7.0.
I have to wait sometimes up to 40.50 sek on some channels.

You live on an iceberg in the North pole, you can't really expect much else

 

[sammer]

You live on an iceberg in the North pole, you can't really expect much else

Good one. I have very good signal and q over 80%

 

[pabloescaban]

Good one. I have very good signal and q over 80%

What I meant was, the server is probably a thousand miles away from you, ECM of 30 seconds is to be expected

 

[sammer]

I understand you. I have ask on the request threads many times for ccline for 19.2 and never got any private post. If someone can point me on good ccline for astra 19.2 feel free to contact me.

 

[pabloescaban]

I understand you. I have ask on the request threads many times for ccline for 19.2 and never got any private post. If someone can point me on good ccline for astra 19.2 feel free to contact me.

You'll be lucky to find anyone offering satellite lines these days, no one bothers any more

 

[pieeater2015]

I understand you. I have ask on the request threads many times for ccline for 19.2 and never got any private post. If someone can point me on good ccline for astra 19.2 feel free to contact me.

Google cardsharing and go from there.there are loads of servers,it’s up to you to find one that suits you.you might need 10 tests before you find the one for you.This is something you need to learn and not hope someone can do it for you.

 

[Ferret.]

You'll be lucky to find anyone offering satellite lines these days, no one bothers any more

Maybe on TK but this is not the case, unless your talking about 28e thats dead. Good euro lines can be found pretty easily.

 

[linesman66]

There is euro servers that support what remains
on the 0960:000000 You need to make sure your add in your oscam configuration And readers
They are slightly more expensive

 

[pabloescaban]

Maybe on TK but this is not the case, unless your talking about 28e thats dead. Good euro lines can be found pretty easily.

He said he'd asked in our request thread, as far as I know, no one here offers sat lines now.

 

[sammer]

can someone help me via teamviewer to get the icam to work?