Get the Best IPTV Service
Grogbuild ATV 6.1 cable only build for H5.2tc, H7C and H4 | Page 61 | Techkings
What's new
By:
Filters

Grogbuild ATV 6.1 cable only build for H5.2tc, H7C and H4

Status
Not open for further replies.
I've just updated to the latest version, when i put the IPTV on through portal the writing is really small now, how can i change it to how it was before
 
grog68 said:
You only see providers order if satellite is enabled. If you have not enabled the satellite tuner and enabled either freesat or sky in Providers then skip the Providers orders section and just press the green button to run a scan.
Click to expand...
grog68 said:
You only see providers order if satellite is enabled. If you have not enabled the satellite tuner and enabled either freesat or sky in Providers then skip the Providers orders section and just press the green button to run a scan.
Click to expand...
Hi
grog68 said:
You only see providers order if satellite is enabled. If you have not enabled the satellite tuner and enabled either freesat or sky in Providers then skip the Providers orders section and just press the green button to run a scan.
Click to expand...
 
grog68 said:
You only see providers order if satellite is enabled. If you have not enabled the satellite tuner and enabled either freesat or sky in Providers then skip the Providers orders section and just press the green button to run a s

Hi I have world wide gift loaded with loaded with "putty" works great when I configure grogbuild I get the virgin channels but my worldwide disappears and also when I configure my line the world wide disappears any ideas cheers?
Click to expand...
 
I’ve just put on my box after a few days away only to find my channels are all mixed up & bouquets folders have changed.
HD channels 1-5 are now SD & sly Atlantic HD has reappeared in entertainment folder along with Gold HD, wtf is going on , is there a fix to revert back to normal channel line up or is this they way it is now.
Any help appreciated
 
bhoywonder88 said:
I’ve just put on my box after a few days away only to find my channels are all mixed up & bouquets folders have changed.
HD channels 1-5 are now SD & sly Atlantic HD has reappeared in entertainment folder along with Gold HD, wtf is going on , is there a fix to revert back to normal channel line up or is this they way it is now.
Any help appreciated
Click to expand...
Are you using for satellite or cable or both?
Try Menu -> Setup -> Service Searching -> AutobouquetsMaker -> Delete Bouquets and then when they have been deleted select Providers and make sure you have correct settings. Press green button and then select Start Scan.

Once done, exit out to tv and then check epg.
 
Using both & tried all the above but still not going back to what it was before.
I’m still getting SD on 101-105.
I seen on another forum to change swap channel to no but still didn’t make any difference.
 
Hi Grog
My h2h was running fine on both cable and satellite but sat has stopped working. Tried scanning using abm but get the following message:
failed to tune sky UK on tuner a. Please check the following : the tuner is correctly configured. You can receive the specified frequency.

Played around with sat settings 28.2 is selected but no luck Only using sat for free view
 
muddym2002 said:
Hi Grog
My h2h was running fine on both cable and satellite but sat has stopped working. Tried scanning using abm but get the following message:
failed to tune sky UK on tuner a. Please check the following : the tuner is correctly configured. You can receive the specified frequency.

Played around with sat settings 28.2 is selected but no luck Only using sat for free view
Click to expand...
I don't really do much with sat these days but I'm sure if you search the forum there have been other reports of satellite/autobouquets issues recently
 
Grog sorry to be a pain but can you provide me with a link for the solution? Tried searching but all I'm finding is threads that are discussing abm on cable . Thanks in advance
 
I've just read the odd post but I may have miss read, I will take a look. Out of interest have you checked that your sat feed is connected properly, I know there is no obvious reason for them to become loose but they do. Make sure the fconnector is tight on the cable.

Also have you tried any of the following:

Menu -> Setup -> Service Searching ->Automatic scan and run a scan on tuner A. Does that pick up the channels?
If it does exit back to Service Searching Menu and select Autobouquets Maker -> Update config. If it updates the config then try a scan.
 
Hi I have gone thro the installation 2 or 3 times all seems OK but I only get the first 5 channels the favorites show up but only the first 5 in entertainment become live my box is a H52tc on virgin media cable Manchester I must be doing something wrong I also load my c: line into Ccam and no channels show any ideas? Cheers
 
steve_1 said:
Hi I have gone thro the installation 2 or 3 times all seems OK but I only get the first 5 channels the favorites show up but only the first 5 in entertainment become live my box is a H52tc on virgin media cable Manchester I must be doing something wrong I also load my c: line into Ccam and no channels show any ideas? Cheers
Click to expand...
Have you set the cam 1 to CCCam in softcam manager and restarted the cam?
One thing I always suggest when people have cam issues is put the box into deep standby (Menu -> Standby/restart -> Deep Standby) and then reboot your router, and once router is back online turn box back on.
 
Status
Not open for further replies.
Back
Top
Flash Sale Popup