Get the Best IPTV Service
Grogbuild ATV 6.1 cable only build for H5.2tc, H7C and H4 | Page 56 | Techkings
What's new
By:
Filters

Grogbuild ATV 6.1 cable only build for H5.2tc, H7C and H4

Status
Not open for further replies.
Rolandgaros said:
Thanks for prompt reply, yes, definitely mg file with working line, as I said it’s a back up of my own box which is working fine. It’s an h2h, yes streams ok
Click to expand...
So you have H2H working which you backed up and then flashed onto another H2H on which you're getting no channel apart from FTA.

are both boxes still using the same line and on at the same time? If so it could be your line isn't 'multiroom' try powering off the original h2h and see what happens
 
sorry not had chance yet, hopefully will give it a go in a minute, if it doesn't flash then will rebuild it
 
Rolandgaros said:
Yes, did a manual scan still got fta
Click to expand...
I don't know then, if you are able to stream using the IPTV player plugin and you have double checked the newcamd.list file I am stumped, you might get more help starting your own thread as others may have had similar issue.
 
something strange going on.

if I put the zgemma folder on the box's normal usb stick that was initialised on the box and then do blue button -> Software Manager -> flash online -> local and browse to sh1 folder on usb stick and flash that way it flashes fine.

If I try flashing using a usb stick formatted fat32 either via software manager on the box or the normal way, ie from powering the box on it, doesn't flash.

I've never known of this issue before.
 
Ok, the h1 I have is blank has no image on it at all , at work just now , but I could put the file on a usb stick that I use on another box and try it that way
 
tmptrsn said:
Can I do the online install whilst on a different image (AndyMC) ?
Click to expand...
Yes, if you put the zgemma folder that was in the grogbuild zip file on your boxes usb stick and then press the blue button and select flash online from the right hand column, on the next screen click the blue button followed by the yellow button. Now browse to the zgemma/sh1 folder on your usb (/media/hdd/zgemma/sh1 ) and then press the green button to flash.
 
grog68 said:
Yes, if you put the zgemma folder that was in the grogbuild zip file on your boxes usb stick and then press the blue button and select flash online from the right hand column, on the next screen click the blue button followed by the yellow button. Now browse to the zgemma/sh1 folder on your usb (/media/hdd/zgemma/sh1 ) and then press the green button to flash.
Click to expand...
can confirm works on above way just tried it ..only probs i had when do a restart have to turn it of via the white button ..h2 confirmed just setting the rest up noo.. cheers
 
biggchapp said:
can confirm works on above way just tried it ..only probs i had when do a restart have to turn it of via the white button ..h2 confirmed just setting the rest up noo.. cheers
Click to expand...
From now on, any updates/reflashes of grogbuild you want on the box can be done by going back to flash online but clicking online rather than local and grogbuild will be at the top of the list.

When I get time I will try to figure out why the image won't flash in the normal way.
 
Status
Not open for further replies.
Back
Top
Flash Sale Popup