Get the Best IPTV Service
Grogbuild ATV 6.1 cable only build for H5.2tc, H7C and H4 | Page 32 | Techkings
What's new
By:

Grogbuild ATV 6.1 cable only build for H5.2tc, H7C and H4

Status
Not open for further replies.
littlebilly1 said:
I downloaded the build last week and re-flashed via usb, one thing I didn't do though was change the name of the file because there's already a force file in the folder, do I replace it?

LG G6 using Tapatalk
Click to expand...

You've lost me. the file is usually called noforce which you can rename to force, if you already had a folder with a 'force' file in it, when did you rename it to force? - or is this an old folder?

1 Download the new build files
2 rename the noforce to force
3 put the folder on a formatted (fat32) usb stick
4 flash as normal

don't have other folders, older files etc as these will affect the flash
 
pabloescaban said:
You've lost me. the file is usually called noforce which you can rename to force, if you already had a folder with a 'force' file in it, when did you rename it to force? - or is this an old folder?

1 Download the new build files
2 rename the noforce to force
3 put the folder on a formatted (fat32) usb stick
4 flash as normal

don't have other folders, older files etc as these will affect the flash
Click to expand...

1. Downloaded new flash files
2. Unzipped to fresh formatted 16GB cruzer usb
3. Tried to change noforce to force. And there was already a force file there after unzipping

LG G6 using Tapatalk
 
I don't use a H4 box so I assumed the files would be named the same as they are for my box, the H2H, if the freshly downloaded files have a 'force' file included then you have flashed it ok, you may have to flash it again though because it doesn't seem to have worked
 
littlebilly1 said:
1. Downloaded new flash files
2. Unzipped to fresh formatted 16GB cruzer usb
3. Tried to change noforce to force. And there was already a force file there after unzipping

LG G6 using Tapatalk
Click to expand...
pabloescaban said:
I don't use a H4 box so I assumed the files would be named the same as they are for my box, the H2H, if the freshly downloaded files have a 'force' file included then you have flashed it ok, you may have to flash it again though because it doesn't seem to have worked
Click to expand...

NONE of the grogbuild downloads for any box have a file already named force in them. I've just double checked so it sounds like you have reflashed an old image.

I suggest you try flashing online, press the blue button on remote and then select 'Flash Online' from the right hand menu, on the next screen press the Green button which will bring up a list of images you can flash. Grogbuild should be at the top of the list. Select it.

Obviously back up you settings first and then restore them once flashed.
 
Hi I have this build on my h2h thanks for the hard work..great build.
I noticed the flash online option above so wanted to try for my bu+ solo se version 2 box as I'm yet to find an image/build for this box. Unfortunately nothing appears for me to flash online after going into that menu. Any idea where I can get/see files to flash online please?
Thsnks for any help.

Sent from my SM-N910F using Tapatalk
 
I'm afraid grogbuild is not available for the VU+ boxes. have you checked the download section to see if there is a build? alternatively you can flash atv 6.1 and build your own
 
grog68 said:
I'm afraid grogbuild is not available for the VU+ boxes. have you checked the download section to see if there is a build? alternatively you can flash atv 6.1 and build your own
Click to expand...
Hi yea I know grogbuild unavailable for vu+ which is a shame as it's a great build. I just wondered why nothing appeared in the flash online section. I've had a little look but can't see anything solid and stable for the Vu+ box with the audio description fix as yet. Thanks

Sent from my SM-N910F using Tapatalk
 
hi grog, just installed your build

great work sir

is there anyway i can get the epg to populate hd channels first ?

thanks again
 
BigBrizo said:
hi grog, just installed your build

great work sir

is there anyway i can get the epg to populate hd channels first ?

thanks again
Click to expand...
do you mean so 101 is bbc1 HD? if so then menu -> setup -> Service searching -> Autobouquetsmaker -> providers and set Virgin(UK):swap channels to yes and then green button to save and then run a scan
 
Two problems with the H2H setup.

1.There are foreign channels bouquets which dont need to be tehre if ABM was setup for UK Sky and Virgin only ,It should only have these.

The foreign channels needs to be deleted manually which can take 5 mins.

2. I had to install a cccam file to put my C line in.It only had oscam and mgcamd.

If these matters can be implemented into image, it would be great.A good example is that of Dsayers image for the same box
 
genghiskhan said:
Two problems with the H2H setup.

1.There are foreign channels bouquets which dont need to be tehre if ABM was setup for UK Sky and Virgin only ,It should only have these.

The foreign channels needs to be deleted manually which can take 5 mins.

2. I had to install a cccam file to put my C line in.It only had oscam and mgcamd.

If these matters can be implemented into image, it would be great.A good example is that of Dsayers image for the same box
Click to expand...

1. The H2H image does have cccam 2.3.0 installed, below is a screenshot of my h2h softcam manager :cccamonh2h.jpg

2. Not sure what you mean about the foreign channels? the only foreign channels I have on my h2h is the International bouquet, if you don't want them then just remove the bouquet.
 
grog68 said:
1. The H2H image does have cccam 2.3.0 installed, below is a screenshot of my h2h softcam manager :View attachment 28702

2. Not sure what you mean about the foreign channels? the only foreign channels I have on my h2h is the International bouquet, if you don't want them then just remove the bouquet.
Click to expand...
I have cccam too

Sent from my SM-N910F using Tapatalk
 
gmanpanthro said:
This appears to be something grog has forgotten to do, as i updated my uncles tonight via teamviewer and when i checked this menu it was still left as default.

Press menu, setup, audio, auto language selection and copy these settings exactly.

a66e12b410bc7b564ab30d45a0c2a68a.jpg
Click to expand...
Cheers mate.
 
Anyone know how to slow down the channel changing. I.e. when I change the channel using the channel numbers as soon as I've pressed 2 numbers it changes to virmin media channel cus I've not put the full channel number in. You have to be really fast to change the channel. Can this be slowed down
 
You can slow it down by going to channel selection settings then change channel zap delay mode to user defined. Beneath that setting there are settings for first button and another button adjust to suit you. Press Green to save, you may have to do this a few times to fine tune to your needs.
 
1999gtv said:
You can slow it down by going to channel selection settings then change channel zap delay mode to user defined. Beneath that setting there are settings for first button and another button adjust to suit you. Press Green to save, you may have to do this a few times to fine tune to your needs.
Click to expand...
Thanks for that.
 
Status
Not open for further replies.
Back
Top
Flash Sale Popup