Get the Best IPTV Service
GrogBuild - Grogbuild 6.4 update? | Page 3 | Techkings
What's new
By:
Filters

GrogBuild Grogbuild 6.4 update?

pabloescaban said:
The usb is corrupted, you've been trying it for over a week, a new SanDisk is less than a tenner
Click to expand...
I got delivery of a new SanDisk 32MB as you recommended, though I still think my other one is 100%. I opened it today, formatted exFat on my Windows machine, inserted it into my Forumler1 box, initialized it via the openwix interface. Then from putty I ran:

wget --no-check-certificate -O install_vix.sh http://www.willobuild.net/files/scripts/install_vix.sh && bash install_vix.sh

This resulted in failure with message no space left on the device:

root@formuler1:~# wget --no-check-certificate -O install_vix.sh http://www.willo build.net/files/scripts/install_vix.sh && bash install_vix.sh
--2023-07-30 13:27:50-- http://www.willobuild.net/files/scripts/install_vix.sh
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7709 (7.5K) [application/x-sh]
Saving to: ‘install_vix.sh’

install_vix.sh 100%[===================>] 7.53K --.-KB/s in 0.005s

2023-07-30 13:27:50 (1.49 MB/s) - ‘install_vix.sh’ saved [7709/7709]

mkdir: can't create directory '/media/hdd/#Backups#': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
mkdir: can't create directory '/media/hdd/#Backups#/': Read-only file system
cp: can't create '/media/hdd/#Backups#/BackupALL/usr/lib/enigma2/python/Screens/ EpgSelectionBase.py': No such file or directory
cp: can't create '/media/hdd/#Backups#/BackupALL/usr/lib/enigma2/python/Screens/ EpgSelectionMulti.py': No such file or directory
cp: can't create '/media/hdd/#Backups#/BackupALL/usr/lib/enigma2/python/Screens/ About.py': No such file or directory
cp: can't create directory '/media/hdd/#Backups#/EPGimportBackup/etc/': No such file or directory
cp: can't create '/media/hdd/#Backups#/TimerBackup/etc/enigma2/autotimer.xml': N o such file or directory
cp: can't create '/media/hdd/#Backups#/TimerBackup/etc/enigma2/timers.xml': No s uch file or directory
mkdir: can't create directory '/media/hdd/backup': Read-only file system
--2023-07-30 13:27:51-- http://www.willobuild.net/files/tar/vix-rel-IM-6.4-will obuild.tar.gz
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2520292 (2.4M) [application/x-gzip]
Saving to: ‘vix-rel-IM-6.4-willobuild.tar.gz’

vix-rel-IM-6.4-will 100%[===================>] 2.40M 3.04MB/s in 0.8s

2023-07-30 13:27:52 (3.04 MB/s) - ‘vix-rel-IM-6.4-willobuild.tar.gz’ saved [2520 292/2520292]

mkdir: can't create directory '/media/hdd/imagebackups/': Read-only file system
mkdir: can't create directory '/media/hdd/imagebackups/': Read-only file system
--2023-07-30 13:27:52-- Downloads
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 34.19K --.-KB/s in 0.004s

2023-07-30 13:27:52 (7.77 MB/s) - written to stdout [35008]

1) ax-technology 8) medialink 15) spycat
2) amiko 9) miraclebox 16) technomate
3) edision 10) mutant 17) tiviar
4) forumler 11) octagon 18) venton-unibox
5) gigablue 12) odin-mara 19) vu-plus
6) golden-interstar 13) xtrend 20) zgemma
7) maxdigital 14) opticum
Please select the brand of your box4
You picked forumler which is option 4
now getting list of forumler boxes from Downloads loads/forumler-images
--2023-07-30 13:27:56-- FORUMLER IMAGES images
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: FORUMLER IMAGES [follow ing]
--2023-07-30 13:27:57-- FORUMLER IMAGES images/
Reusing existing connection to www.openvix.co.uk:443.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 28.22K --.-KB/s in 0.003s

2023-07-30 13:27:57 (8.74 MB/s) - written to stdout [28894]

1) formuler-1 3) formuler-f4-turbo
2) formuler-1-with-transcoding-support
Please select model of your box1
You picked formuler-1 which is option 1
If using multiboot box please enter partition to flash:
--2023-07-30 13:28:00-- FORUMLER IMAGES images/formuler-1
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: Formuler 1 -1/ [following]
--2023-07-30 13:28:01-- FORUMLER IMAGES images/formuler-1/
Reusing existing connection to www.openvix.co.uk:443.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 33.02K --.-KB/s in 0.005s

2023-07-30 13:28:01 (6.24 MB/s) - written to stdout [33815]

--2023-07-30 13:28:01-- https://www.openvix.co.uk/openvix-builds/formuler1/open vix-6.4.003.release-formuler1_usb.zip
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 121860928 (116M) [application/zip]
Saving to: ‘latestvix.zip’

latestvix.zip 100%[===================>] 116.21M 4.20MB/s in 29s

2023-07-30 13:28:31 (3.96 MB/s) - ‘latestvix.zip’ saved [121860928/121860928]

Archive: latestvix.zip
inflating: formuler1/imageversion
inflating: formuler1/kernel.bin
inflating: formuler1/noforce
inflating: formuler1/rootfs.bin
unzip: write: No space left on device
unzip: inflate error
root@formuler1:~#
Click to expand...
 
Last edited:
You formatted it to exfat?

FAT32

It looks like the box is not utilising the usb and trying to download to the box internal flash, this is not big enough.

If you have a different usb port in the box, put the usb in that and try again (after the FAT32 formatting)
 
pabloescaban said:
You formatted it to exfat?

FAT32

It looks like the box is not utilising the usb and trying to download to the box internal flash, this is not big enough.

If you have a different usb port in the box, put the usb in that and try again (after the FAT32 formatting)
Click to expand...
Thanks for sticking with me, this is hard.
Maybe I got confused. Ok. I formatted it again to fat32 and then initialized it. Mowed the SanDisk to the USB port at the front of the machine. I re ran wget:

root@formuler1:~# wget --no-check-certificate -O install_vix.sh http://www.willobuild.net/files/scripts/install_vix.sh && bash install_vix.sh
--2023-07-30 19:32:47-- http://www.willobuild.net/files/scripts/install_vix.sh
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7709 (7.5K) [application/x-sh]
Saving to: ‘install_vix.sh’

install_vix.sh 100%[===================>] 7.53K --.-KB/s in 0s

2023-07-30 19:32:48 (56.0 MB/s) - ‘install_vix.sh’ saved [7709/7709]

--2023-07-30 19:32:49-- http://www.willobuild.net/files/tar/vix-rel-IM-6.4-willobuild.tar.gz
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2520292 (2.4M) [application/x-gzip]
Saving to: ‘vix-rel-IM-6.4-willobuild.tar.gz’

vix-rel-IM-6.4-will 100%[===================>] 2.40M 4.07MB/s in 0.6s

2023-07-30 19:32:50 (4.07 MB/s) - ‘vix-rel-IM-6.4-willobuild.tar.gz’ saved [2520292/2520292]

--2023-07-30 19:32:50-- Downloads
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 34.19K --.-KB/s in 0.004s

2023-07-30 19:32:51 (7.97 MB/s) - written to stdout [35008]

1) ax-technology 8) medialink 15) spycat
2) amiko 9) miraclebox 16) technomate
3) edision 10) mutant 17) tiviar
4) forumler 11) octagon 18) venton-unibox
5) gigablue 12) odin-mara 19) vu-plus
6) golden-interstar 13) xtrend 20) zgemma
7) maxdigital 14) opticum
Please select the brand of your box4
You picked forumler which is option 4
now getting list of forumler boxes from FORUMLER IMAGES
--2023-07-30 19:33:28-- FORUMLER IMAGES
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: FORUMLER IMAGES [following]
--2023-07-30 19:33:28-- FORUMLER IMAGES
Reusing existing connection to www.openvix.co.uk:443.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 28.22K --.-KB/s in 0.003s

2023-07-30 19:33:29 (9.84 MB/s) - written to stdout [28894]

1) formuler-1 3) formuler-f4-turbo
2) formuler-1-with-transcoding-support
Please select model of your box1
You picked formuler-1 which is option 1
If using multiboot box please enter partition to flash:
--2023-07-30 19:33:31-- Formuler 1
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: Formuler 1 [following]
--2023-07-30 19:33:32-- Formuler 1
Reusing existing connection to www.openvix.co.uk:443.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

- [ <=> ] 33.01K --.-KB/s in 0.008s

2023-07-30 19:33:32 (3.96 MB/s) - written to stdout [33800]

--2023-07-30 19:33:32-- https://www.openvix.co.uk/openvix-builds/formuler1/openvix-6.4.003.release-formuler1_usb.zip
Resolving www.openvix.co.uk... 176.31.181.161
Connecting to www.openvix.co.uk|176.31.181.161|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 121860928 (116M) [application/zip]
Saving to: ‘latestvix.zip’

latestvix.zip 100%[===================>] 116.21M 2.36MB/s in 38s

2023-07-30 19:34:10 (3.09 MB/s) - ‘latestvix.zip’ saved [121860928/121860928]

Archive: latestvix.zip
inflating: formuler1/imageversion
inflating: formuler1/kernel.bin
inflating: formuler1/noforce
inflating: formuler1/rootfs.bin

ofgwrite Utility v4.6.6
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs
Flashing kernel
Searching image files in ./ resolved to /media/hdd/imagebackups/willobuild/formuler1
Found rootfs file: /media/hdd/imagebackups/willobuild/formuler1/rootfs.bin
Found kernel file: /media/hdd/imagebackups/willobuild/formuler1/kernel.bin
Found UBIFS rootfs
Found mounted /newroot
Found mountpoint for rootfs file: /media/hdd

Found /proc/mtd entries:
Device: Size: Erasesize: Name: Image:
mtd0: 1fb00000 00020000 "complete"
mtd1: 00600000 00020000 "kernel" -> /media/hdd/imagebackups/willobuild/formuler1/kernel.bin
mtd2: 1f500000 00020000 "rootfs" -> /media/hdd/imagebackups/willobuild/formuler1/rootfs.bin
Using kernel mtd device: /dev/mtd1
Using rootfs mtd device: /dev/mtd2
Read /proc/cmdline
Kexec mode is:
Current rootfs is: ubi0:rootfs
Current kernel is:
Current root sub dir is:


killall: nmbd: no process killed
killall: smbd: no process killed
killall: rpc.mountd: no process killed
killall: rpc.statd: no process killed
killall: CCcam: no process killed

Usage:
kill [options] <pid> [...]

Options:
<pid> [...] send signal to every <pid> listed
-<signal>, -s, --signal <signal>
specify the <signal> to be sent
-q, --queue <value> integer value to be sent with the signal
-l, --list=[<signal>] list all signal names, or convert one to a name
-L, --table list all signal names in a nice table

-h, --help display this help and exit
-V, --version output version information and exit

For more details see kill(1).

Usage:
kill [options] <pid> [...]

Options:
<pid> [...] send signal to every <pid> listed
-<signal>, -s, --signal <signal>
specify the <signal> to be sent
-q, --queue <value> integer value to be sent with the signal
-l, --list=[<signal>] list all signal names, or convert one to a name
-L, --table list all signal names in a nice table

-h, --help display this help and exit
-V, --version output version information and exit

For more details see kill(1).
killall: kodi.bin: no process killed
killall: hddtemp: no process killed
killall: transmission-daemon: no process killed
killall: openvpn: no process killed
sh: line 1: /etc/init.d/sabnzbd: No such file or directory
Stopping automount: done.
Syncing filesystem
daemonize
root@formuler1:~# successful
start umount_rootfs
cp: can't stat '/lib/libcrypt*': No such file or directory
Switching to user mode 2
Checking E2 is running...
Execute: ps
E2 still running
Execute: ps
E2 is stopped
Move mountpoint of image files
Moving /oldroot/media/hdd to /media/hdd
umounting: /media/autofs
umounting: /media
umounting: /sys/kernel/debug
/bin/automount: error while loading shared libraries: libautofs.so: cannot open shared object file: No such file or directory
Error starting autofs
init: /run/initctl: No such file or directory
Execute: fuser -k -m /oldroot/
Click to expand...

I then did a:
df -Th
Using username "root".
root@formuler1:~# df -Th
Filesystem Type Size Used Available Use% Mounted on
ubi0:rootfs ubifs 437.4M 159.0M 278.3M 36% /
devtmpfs devtmpfs 157.0M 4.0K 157.0M 0% /dev
tmpfs tmpfs 64.0K 0 64.0K 0% /media
tmpfs tmpfs 157.1M 128.0K 157.0M 0% /var/volatile
/dev/sda1 ext4 28.5G 302.3M 28.2G 1% /media/hdd
Click to expand...
 
pabloescaban said:
So it's flashed successfully now?
Click to expand...
I was under the impression from all the messages that the installation had not finished correctly, but if it has from above read out, that's great news.
tbh, I was expecting to have to do more user input at the install like when doing the GrogBuild install where you had to select a sky region, IPTV, and pick a skin.
No, I was left with a screen to restore a backup and I said no. then the setup wizard. I think I resized the screen right and it was bigger than my screen. I wasn't sure about all the options and now it's 52% scanned and found 489 channels. There might have been an option to only find tuned-in channels.
 
boardtc said:
I was under the impression from all the messages that the installation had not finished correctly, but if it has from above read out, that's great news.
tbh, I was expecting to have to do more user input at the install like when doing the GrogBuild install where you had to select a sky region, IPTV, and pick a skin.
No, I was left with a screen to restore a backup and I said no. then the setup wizard. I think I resized the screen right and it was bigger than my screen. I wasn't sure about all the options and now it's 52% scanned and found 489 channels. There might have been an option to only find tuned-in channels.
Click to expand...
I've never used willobuild or openvix so not sure of the options during setup.

As pointed out earlier in this thread, Grogbuild only goes up to atv 6.4.
If you can't get Willo/openvix working to your satisfaction you can still use openatv but not Grogbuild, setting up openatv yourself without the use of grog or woosh is fairly straightforward
 
boardtc said:
I was under the impression from all the messages that the installation had not finished correctly, but if it has from above read out, that's great news.
tbh, I was expecting to have to do more user input at the install like when doing the GrogBuild install where you had to select a sky region, IPTV, and pick a skin.
No, I was left with a screen to restore a backup and I said no. then the setup wizard. I think I resized the screen right and it was bigger than my screen. I wasn't sure about all the options and now it's 52% scanned and found 489 channels. There might have been an option to only find tuned-in channels.
Click to expand...
Choose restore follow his step by step guide

WHEN THE BOX REBOOTS YOU WILL BE ASKED IF YOU WANT TO RESTORE SETTINGS, SELECT ‘YES’AND THEN HIGHLIGHT

UP AND RUNNING IN 3 EASY STEPS:

1) FLASH USING PUTTY
2) RESTORE SETTINGS DURING WIZARD
3) RESTORE LINE AND TIMERS
FULL INSTRUCTIONS
 
Once you have finished the wizard press blue button, vix image management then backup manager choose the willobuild backup and restore it.
 
930 channels installed now, it's looking to add plugins? I was hoping all this would be included in the willoBuild?
I need to follow those WilloBuild pdf instructions, that's the issue :-(
Do I have to redo the wget or is there a way of kicking off the restore question again
 
Last edited:
Skip the rest of the wizard then blue button vix image management as per above.

Once willobuild has restored follow the rest of the guide to setup ABM etc
 
boardtc said:
930 channels installed now, it's looking to add plugins? I was hoping all this would be included in the willoBuild?
I need to follow those WilloBuild pdf instructions, that's the issue :-(
Do I have to redo the wget or is there a way of kicking off the restore question again
Click to expand...
Follow his guide what is the point in him doing it otherwise its very simple to follow.

Click on this link below

FULL INSTRUCTIONS
 
That worked out, installing WilloBuild with OpenVix 6.4. There were a couple of sections in the FULL INSTRUCTIONS that did not quite work as the instructions, here's some feedback/issues:
  1. I went with 1080 and did not get an option this time to adjust the screen. As a result only the bottom 3rd of the bouquet name is visible and the options at the bottom are only partially visible also. How can I adjust in the settings?
  2. Picons: show in channel list was not an option (non issue)
  3. My storage was mounted as /media/usb, I updated the USB storage to map to /media/hdd as instructed
  4. Press blue bottom and select 'AUTOBOUQUETMAKJER SCANNER" - this step was done automatically so was not needed
  5. OpenTV forced download does nothing when selected, it goes back to BBC 1 every time it's tried. I know it's meant to last 10+ minutes whatever it's meant to do?
I think #1 is the only real issue. Any more help much appreciated!!
 
boardtc said:
That worked out, installing WilloBuild with OpenVix 6.4. There were a couple of sections in the FULL INSTRUCTIONS that did not quite work as the instructions, here's some feedback/issues:
  1. I went with 1080 and did not get an option this time to adjust the screen. As a result only the bottom 3rd of the bouquet name is visible and the options at the bottom are only partially visible also. How can I adjust in the settings?
  2. Picons: show in channel list was not an option (non issue)
  3. My storage was mounted as /media/usb, I updated the USB storage to map to /media/hdd as instructed
  4. Press blue bottom and select 'AUTOBOUQUETMAKJER SCANNER" - this step was done automatically so was not needed
  5. OpenTV forced download does nothing when selected, it goes back to BBC 1 every time it's tried. I know it's meant to last 10+ minutes whatever it's meant to do?
I think #1 is the only real issue. Any more help much appreciated!!
Click to expand...
This thread is about grogbuild post in the correct support section link below

WilloBuild OpenViX 6.4 Series
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup