Get the Best IPTV Service
Channels gone black on 19.2°E | Page 29 | Techkings
What's new
By:
Filters

Channels gone black on 19.2°E

Hi,
AJP007 said:
@tristasatki,
What Channels do you want to open?.... on which Sat?
Did you Edit the oscam.server file with YOUR own oscam Details...Server name - User - Password? Attribute set to 755 and saved.
I am using the v.11693 oscam version. If you are having errors then my oscam files are NOT compatible with your version.
Please contact your Provider to send you the updated config.Files..OK
My provider ONLY uses the four files I attached..everything else is set up his end.
AJP007
Click to expand...
Hi, thanks. i'll have another go at this, ATM my channels are SLY DE, Polish 13 Hot Bird and ESp 19 Astra
 
So is it just movie channels that have gone so far on Sky DE?
I only really watch documentaries and Fox which are still working.
Hopefully they will leave them alone because they're not owned by Sky.
 
tristansatki said:
It was the box with something about python , would half cover the screen, rebooted box, no channels. Gone back to "linesmann 66 " post 543
Click to expand...

tristansatki said:
Hi,

Hi, thanks. i'll have another go at this, ATM my channels are SLY DE, Polish 13 Hot Bird and ESp 19 Astra
Click to expand...
Hi Tried again, saved files, still not working see pics
 

Attachments

  • no files.png
    no files.png
    97.9 KB · Views: 28
  • soft check.png
    soft check.png
    528.5 KB · Views: 23
@tristansatki
OK....ONLY the SLY.de channels are DOWN, a few other German remaining are still running.
Everything else is as it was before concerning the channels you mentioned.
Austria,French,Espana 19e... still OK .....ONLY Canal+ Pol 13e is OFF the other POL still..OK...... 0.8w still OK

Looks like you do NOT have any config Files in your oscam Folder .
It should look like this see attachment below.
The three other files oscam.prov,oscam.ccache,oscam.srvid2 are auto generated when your oscam starts to run..!
Before you start Deleteing your oscam get your CONFIG files from your provider. IMPORTANT.!
You will need these to SET up on the new downloaded latest version of oscam.


Your provider will send you the Files, just insert them into the ...../etc/tuxbox/config/oscam folder and attribute 755 SAVE Exit

When you have the NEW Config.files
Then and ONLY then should you try to uninstall and install the latest oscam version from your EXTENSION Feeds.
Menu > Plugins > press Red Button, Remove plugins, then in SOFTCAMS find your oscam, REMOVE it, reboot Box.
Menu > Plugins > press Green Button Download plugins, go to SOFTCAMS and choose an oscam version and Install it.
Reboot box and then go and config the installed oscam with your Providers files.
You should then be up and running again.

I ONLY use openATV, openPLi and openHDD images I dont know openVIX images at ALL SORRY, maybe someone with VIX knowledge can assist you.
AJP007
Willo3092 said:
So is it just movie channels that have gone so far on Sky DE?
I only really watch documentaries and Fox which are still working.
Hopefully they will leave them alone because they're not owned by Sky.
Click to expand...
Your like me then, I watch Docus and Nat Geo, the Movies I can watch via IPTV so no big loss.
But the Germans are confident to find a solution. Lets wait and see. Cheers
 

Attachments

  • config.files 26.07.2021.png
    config.files 26.07.2021.png
    40.1 KB · Views: 18
Last edited:
AJP007 said:
@tristansatki
OK....ONLY the SLY.de channels are DOWN, a few other German remaining are still running.
Everything else is as it was before concerning the channels you mentioned.
Austria,French,Espana 19e... still OK .....ONLY Canal+ Pol 13e is OFF the other POL still..OK...... 0.8w still OK

Looks like you do NOT have any config Files in your oscam Folder .
It should look like this see attachment below.
The three other files oscam.prov,oscam.ccache,oscam.srvid2 are auto generated when your oscam starts to run..!
Before you start Deleteing your oscam get your CONFIG files from your provider. IMPORTANT.!
You will need these to SET up a new downloaded latest version of oscam.


Your provider will send you the Files, just insert them into the ...../etc/tuxbox/config/oscam folder and attribute 755 SAVE Exit

When you have the NEW Config.files
Then and ONLY then should you try to uninstall and install the latest oscam version from your EXTENSION Feeds.
Menu > Plugins > press Red Button, Remove plugins, then in SOFTCAMS find your oscam, REMOVE it, reboot Box.
Menu > Plugins > press Green Button Download plugins, go to SOFTCAMS and choose an oscam version and Install it.
Reboot box and then go and config the installed oscam with your Providers files.
You should then be up and running again.

I ONLY use openATV, openPLi and openHDD images I dont know openVIX images at ALL SORRY, maybe someone with VIX knowledge can assist you.
AJP007

Your like me then, I watch Docus and Nat Geo, the Movies I can watch via IPTV so no big loss.
But the Germans are confident to find a solution. Lets wait and see. Cheers
Click to expand...
Hi,

Yes, thanks I've had another go and it works.
 

Attachments

  • configggi 1700 bst.png
    configggi 1700 bst.png
    115.4 KB · Views: 12
AJP007 said:
@tristansatki
OK....ONLY the SLY.de channels are DOWN, a few other German remaining are still running.
Everything else is as it was before concerning the channels you mentioned.
Austria,French,Espana 19e... still OK .....ONLY Canal+ Pol 13e is OFF the other POL still..OK...... 0.8w still OK

Looks like you do NOT have any config Files in your oscam Folder .
It should look like this see attachment below.
The three other files oscam.prov,oscam.ccache,oscam.srvid2 are auto generated when your oscam starts to run..!
Before you start Deleteing your oscam get your CONFIG files from your provider. IMPORTANT.!
You will need these to SET up a new downloaded latest version of oscam.


Your provider will send you the Files, just insert them into the ...../etc/tuxbox/config/oscam folder and attribute 755 SAVE Exit

When you have the NEW Config.files
Then and ONLY then should you try to uninstall and install the latest oscam version from your EXTENSION Feeds.
Menu > Plugins > press Red Button, Remove plugins, then in SOFTCAMS find your oscam, REMOVE it, reboot Box.
Menu > Plugins > press Green Button Download plugins, go to SOFTCAMS and choose an oscam version and Install it.
Reboot box and then go and config the installed oscam with your Providers files.
You should then be up and running again.

I ONLY use openATV, openPLi and openHDD images I dont know openVIX images at ALL SORRY, maybe someone with VIX knowledge can assist you.
AJP007

Your like me then, I watch Docus and Nat Geo, the Movies I can watch via IPTV so no big loss.
But the Germans are confident to find a solution. Lets wait and see. Cheers
Click to expand...
Hello AJ,
I changed the image in multiboot to OpenATV 6.3, and reinserted your files etc. Channels now clearing (DE, POL, and ESP) I'll try OpenATV 6.4 soon and check again. Thanks
 
OK listen my friend you are doing this wrong....IF you have an oscam installed it should show and mount several Folders in the OSCAM..
ETC/TUXBOX/CONFIG/OSCAM......!!!!! This will be the place to put your files.
After you have deleted and replaced what was automatically installed, either with mine or with the ones given to you from your Provider..OK

You have put your files into the
ETC/TUXBOX/CONFIG....!!!.. this is NOT the OSCAM Folder go one step further..OK
Do you see the difference? UNLESS your VIX image PFAD for the oscam files is different from ALL other images
then that is your first mistake. I CANNOT tell you this as I DO NOT know openVIX images at ALL.

TRY that again....with my config files..BUT you have to Edit your Detaile into the oscam.server file.

SECOND mistake might be that you are trying to USE my files which are NOT compatible....Unless you have an openATV 6.4 or openPLi 8 image installed with
exactly the same configurated files from YOUR provider it will NOT work. I am using oscam v.11693 on my images.
He might be using CCversion of any one of these 2.0.11 - 2.2.1 - 2.3.0 - 2.3.2. in HIS oscam.server file.
I have a CCversion 2.3.2 in my oscam.server.

Please get ALL your files from your Provider its easy then and it will work again..OK

AJP007



PS .....(y)I see that you have been busy and its working for you now..Thats great. (y)YES..it should also work on openATV 6.4:smiley:
 

Attachments

  • tristansatski.png
    tristansatski.png
    122.6 KB · Views: 8
Last edited:
Willo3092 said:
On ViX the config files are in /etc/tuxbox/config/
There is no sub folder as used by ATV images.
Click to expand...
OK Thanks for that , understand why he put them in there then. I don't use VIX at all so I could not comment on that.
BUT its sorted now, he is clearing same as what we have got running(y)

By the By do you know what "VIX" translated means in German "wank"..:LOL:
 
dsayers2014 said:
Are you putting the configs in etc/tuxbox/config?
Click to expand...

AJP007 said:
OK listen my friend you are doing this wrong....IF you have an oscam installed it should show and mount several Folders in the OSCAM..
ETC/TUXBOX/CONFIG/OSCAM......!!!!! This will be the place to put your files.
After you have deleted and replaced what was automatically installed, either with mine or with the ones given to you from your Provider..OK

You have put your files into the
ETC/TUXBOX/CONFIG....!!!.. this is NOT the OSCAM Folder go one step further..OK
Do you see the difference? UNLESS your VIX image PFAD for the oscam files is different from ALL other images
then that is your first mistake. I CANNOT tell you this as I DO NOT know openVIX images at ALL.

TRY that again....with my config files..BUT you have to Edit your Detaile into the oscam.server file.

SECOND mistake might be that you are trying to USE my files which are NOT compatible....Unless you have an openATV 6.4 or openPLi8 image installed with
exactly the same configurated files from YOUR provider it will NOT work. I am using oscam v.11693 on my images.
He might be using CCversion of any one of these 2.0.11 - 2.2.1 - 2.3.0 - 2.3.2. in HIS oscam.server file.
I have a CCversion2.3.2 in my oscam.server.

Please get ALL your files from your Provider its easy then and it will work again..OK

AJP007
Click to expand...
Hello AJ,
I changed the image in multiboot to OpenATV 6.3, and reinserted your files etc. Channels now clearing (DE, POL, and ESP) I'll try OpenATV 6.4 soon and check again. Thanks
I now have started
AJP007 said:
OK listen my friend you are doing this wrong....IF you have an oscam installed it should show and mount several Folders in the OSCAM..
ETC/TUXBOX/CONFIG/OSCAM......!!!!! This will be the place to put your files.
After you have deleted and replaced what was automatically installed, either with mine or with the ones given to you from your Provider..OK

You have put your files into the
ETC/TUXBOX/CONFIG....!!!.. this is NOT the OSCAM Folder go one step further..OK
Do you see the difference? UNLESS your VIX image PFAD for the oscam files is different from ALL other images
then that is your first mistake. I CANNOT tell you this as I DO NOT know openVIX images at ALL.

TRY that again....with my config files..BUT you have to Edit your Detaile into the oscam.server file.

SECOND mistake might be that you are trying to USE my files which are NOT compatible....Unless you have an openATV 6.4 or openPLi 8 image installed with
exactly the same configurated files from YOUR provider it will NOT work. I am using oscam v.11693 on my images.
He might be using CCversion of any one of these 2.0.11 - 2.2.1 - 2.3.0 - 2.3.2. in HIS oscam.server file.
I have a CCversion 2.3.2 in my oscam.server.

Please get ALL your files from your Provider its easy then and it will work again..OK

AJP007



PS .....(y)I see that you have been busy and its working for you now..Thats great. (y)YES..it should also work on openATV 6.4:smiley:
Click to expand...
Hi. OpenATV 6.3 all channels working
OpenATV 6.4 (DE channels NOT working (files are in etc/tuxbox/config
 
@ tristansatski,
The config files are stored here for the different images....these are the Pfads.

VIX images = /etc/tuxbox/config
ATV images = /etc/tuxbox/config/oscam
PLi images = /etc/tuxbox/connfig/oscam
HDD images = /etc/tuxbox/config/oscam
I have it running on ATV 6.3 - ATV 6.4 and ATV 6.5 - PLi 8 - HDD 6.4

Which DE are NOT working?
The CInema Film Channels are ALL DOWN....!!
BUT.......Hist,Geo,Geo Wild,Disc,Krimi,Atlantic,One,Serien and Shows,13thSt,SYFY,Univ,Disney, KabelEinsClassics,KabelEins Doku,Sat1.RTL,Pro Sieben, are ALL still running

AJP007
 
Last edited:
AJP007 said:
@ tristansatski,
The config files are stored here for the different images....these are the Pfads.

VIX images = /etc/tuxbox/config
ATV images = /etc/tuxbox/config/oscam
PLi images = /etc/tuxbox/connfig/oscam
HDD images = /etc/tuxbox/config/oscam
I have it running on ATV 6.3 - ATV 6.4 and ATV 6.5

Which DE are NOT working?
The CInema Film Channels are ALL DOWN....!!
BUT.......Hist,Geo,Geo Wild,Disc,Krimi,Atlantic,One,Serien and Shows,13thSt,SYFY,Univ,Disney, KabelEinsClassics,KabelEins Doku,Sat1.RTL,Pro Sieben, are ALL still running

AJP007
Click to expand...
Openatv 6.3: etc/tuxbox/config/oscam - stable/
Openatv 6.3: etc/tuxbox/config/oscam - trunk/

Openatv 6.4: etc/tuxbox/config/oscam - stable/
Openatv 6.4: etc/tuxbox/config/oscam - trunk/

Openvix 5.4.013: etc/tuxbox/config

The DE channels not working are all the ones mentioned above (I'm not referring to the Cinema ones) they are not working on 6.4, they will work on 6.3 and Openvix
 
craiglouth1 said:
Hi is there a fix for canal nc+ 13 east because my channels freeze a lot or get rejected
Click to expand...
Hi I assume you are getting your files from a provider, if he is any good then he should supply you with new config files,
check with him for new config files, its part of the support, otherwise no....no fix
mine are ok,, just a couple of canal+ pol....not running now.

I am in the same boat as you guys, if its NOT working I CONTACT my Provider, Thanks
AJP007
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup