Box wont boot or flash new image, got a blue screen

[Luffy]

openatv 6.1
http://images.mynonpublic.com/openatv/6.1/index.php?open=tmnanosem2

is this for your box ?

This one
http://images.mynonpublic.com/openatv/6.1/index.php?open=tmnanosem2plus

 

[biff2005]

yes that should work ok on ur box

 

[Luffy]

yes that should work ok on ur box

Doesn't work, still showing that Image.

EDIT: Thanks guys for trying, I'm just going to call WOS tomorrow and get them replace it. Only a month old, so fingers crossed. If not I have PP to help me out.

 

[cactikid]

other usb i use are cruzer and integral which flash to show things happening,sounds like its not working,have you read the flashing guide for box?

 

[biff2005]

ok while rebooting box keep pressing ok button

 

[Luffy]

other usb i use are cruzer and integral which flash to show things happening,sounds like its not working,have you read the flashing guide for box?

I've tried with two other 8GB Sandisk USBs same issue. I've followed the guide yes. Make sure box is fully switched (use rocker). Insert USB then turn on rocker. Press power button when mentioned on TV, let it flash, turn box off when mentioned on screen etc. Issue is I cannot tell what's happening as tv just has a blue image from the box.

ok while rebooting box keep pressing ok button

On the remote? Or power button on box, as during flashing I only have access to the power button.

 

[biff2005]

on the remote

 

[cactikid]

did you flash the bootloader file first?

 

[dave100]

Try images from here ::

http://www.openvix.co.uk/index.php/downloads/technomate-images/tm-nano-se-m2/

 

[Luffy]

did you flash the bootloader file first?

Yes but it still shows that image.

 

[biff2005]

Try images from here ::

http://www.openvix.co.uk/index.php/downloads/technomate-images/tm-nano-se-m2/

you bet me to it m8 nice one
was going to suggest that too :)

http://www.openvix.co.uk/index.php/downloads/technomate-images/tm-nano-se-m2-plus/

 

[biff2005]

last post
USB stick formatted to FAT32.
(Preferably no larger than 8GB in size to prevent compatibility issues while flashing the image)
would use a 4gb one if you have one
go here
http://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/
format usb stick

 

[wullboy]

Try a vix image m8...???.. also. have you tried to FTP into the box...???

 

[Luffy]

Try a vix image m8...???.. also. have you tried to FTP into the box...???

Cannot connect. WOS are going to take a look at it, I believe they'll replace the box. So thank you guys for all the suggestions.

 

[woody6222]

I'm following this guide to flash my image:
http://www.world-of-satellite.com/attachment.php?attachmentid=40912&d=1425246277



Issue I'm having is that no Image is being flashed, I cannot see any prompt. It's just that blue Image.



I have a Technomate TM-Nano-SE M2

EDIT: Just tried it, didn't work. I'll contact W.O.S, to try and see if they can do anything about it. If worst comes to worst, try and get them to replace it as It's only a month old.

You will have to learn to like penguins =))

 

[southsimon]

its much easier to change the boot logo with vix than atv, as the boot logos are included in the plugins download section. I find atv omit this. I use the technomate in my spare room, very easy to get rid of the penguins lol. I use the terminator Genisys logo.