UK Sat HD is back - 2023.

[weimaraner95]

started from fresh installed above files and still the same

 

[Abu Baniaz]

New image, softcam from post 491, added server line, started cam.

What method are you using for channels/bouquets? "Marking channels to play using stream relay" or "using separate bouquets"?

 

[weimaraner95]

New image, softcam from post 491, added server line, started cam.

What method are you using for channels/bouquets? "Marking channels to play using stream relay" or "using separate bouquets"?

Both methods the bouquet from 491# and tried dsayers abm custom and then used play using stream relay.

 

[Abu Baniaz]

You will need to check your oscam log. Paste the text or clear screenshot ( edited to remove sensitive text) . Not an unclear picture. Or get someone you trust to log in remotely and assist you.

 

[waqy]

@weimaraner95 just to confirm, you have your system settings as follows:



You also have your supplier's sky card CAID noted in oscam.conf , and in oscam.dvbapi as well?

 

[weimaraner95]

@weimaraner95 just to confirm, you have your system settings as follows:

View attachment 96913

You also have your supplier's sky card CAID noted in oscam.conf , and in oscam.dvbapi as well?

I'll double check oscam files , the custom settings I have yes

You will need to check your oscam log. Paste the text or clear screenshot ( edited to remove sensitive text) . Not an unclear picture. Or get someone you trust to log in remotely and assist you.

Home later will post logs and depending on them , may be some one can remotely take a look

 

[Abu Baniaz]

I have flashed my ET8500. Everything installs fine and runs as expected. However, I can't check the decryption. An incomplete test, but hope it helps steer you in right direction.

 

[weimaraner95]

@weimaraner95 just to confirm, you have your system settings as follows:

View attachment 96913

You also have your supplier's sky card CAID noted in oscam.conf , and in oscam.dvbapi as well?

not sure what i should be looking at tbh

 

[pabloescaban]

not sure what i should be looking at tbh

You were supposed to be uploading the oscam logs?
Also I think the screenshot posted above refers to ABM settings

 

[weimaraner95]

yeah logs i know , i meant the supplier's sky card CAID noted in oscam.conf , and in oscam.dvbapi

i'll post logs soon

 

[hedges2016]

yeah logs i know , i meant the supplier's sky card CAID noted in oscam.conf , and in oscam.dvbapi

i'll post logs soon

[streamrelay]
stream_ecm_delay = 5
stream_relay_ctab = 098D,0960,0961,0963,0919,093B,09CD

 

[cokeaddict]

[streamrelay]
stream_ecm_delay = 5
stream_relay_ctab = 098D,0960,0961,0963,0919,093B,09CD

the 2 in bold, don't exist anymore, so won't do you any good having those listed

 

[hedges2016]

the 2 in bold, don't exist anymore, so won't do you any good having those listed

Haven't got a clue lol
Just copied it from the oscam-config

 

[alan36]

These lines are a nightmare to find a seeler

 

[weimaraner95]

my config file
[global]
disablelog = 1
disablecrccws = 1
disablecrccws_only_for = 0500:030B00,050F00,060A00,060C00,050C00,041950,041960,041970,041980;098D:000000;1811:003311;0E00:000000;0B01:000000;1813:000068;1884:000000;1830:000000;0B00:000000;0963:000000;1810:000000,004001,004101;092B:000000;1819:00006D;091F:000000;09BD:000000;1817:00006A;1814:000000,005211;1802:000000;1838:000000



[streamrelay]
stream_ecm_delay = 5
stream_source_auth_user = dvbapi
stream_relay_ctab = 098D,0960,0961,0963,0919,093B,09CD



[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox



[webif]
httpport = 8888
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255

 

[cokeaddict]

my config file
[global]
disablelog = 1
disablecrccws = 1
disablecrccws_only_for = 0500:030B00,050F00,060A00,060C00,050C00,041950,041960,041970,041980;098D:000000;1811:003311;0E00:000000;0B01:000000;1813:000068;1884:000000;1830:000000;0B00:000000;0963:000000;1810:000000,004001,004101;092B:000000;1819:00006D;091F:000000;09BD:000000;1817:00006A;1814:000000,005211;1802:000000;1838:000000



[streamrelay]
stream_ecm_delay = 5
stream_source_auth_user = dvbapi
stream_relay_ctab = 098D,0960,0961,0963,0919,093B,09CD



[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox



[webif]
httpport = 8888
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255

What caid is your provider using ?

 

[weimaraner95]

caid 0x0963

dont ask me how but its working , problem is i dont know what i did

making a backup , lol

so thats it working on OpenAtv , now for willobuild on boot 1

its strange i have Sky Uk working on ATV but not Sky De , yet on willobuild its visa versa ,

 

[weimaraner95]

sorted on the openatv boot skyt de and uk clears


willobuild or just vix followed same set up but doesny open strange

Ready like willo so got to keep trying

 

[waqy]

sorted on the openatv boot skyt de and uk clears

What did you change in the end?

 

[weimaraner95]

honestly transfering different config files as i have a euro supplier and one that does 16.0e and Now skyuk and theyall supplied me with different configs , so not really sure.

dissapointing thing is i have tried all day trying to get willobuild to work ,
same
1. oscam icam 11718

2 Bouquets

made a copy of the config folder and copied them tubox folder

rebooted