Get the Best IPTV Service
WilloBuild - WilloBuild OpenViX 6.6 Series | Page 44 | Techkings
What's new
By:
Filters

WilloBuild WilloBuild OpenViX 6.6 Series

My bad @Willo3092 I found the bbc red button 1 in that huge list and it works. I rescanned via the autoboutquetmaker and it said done at the end (I got the can't read data error when running via the WilloBuild script) but all the channels are still in the only bouquet, All. These are my settings. Why are the bouquets not created?

1691449012218.png
 
If ABM is not completing, you have a signal issue. Maybe a loose f plug. If you perform a manual scan, single satellite, how many channels do you get? If less than 850 it is confirmation of a problem.
 
Abu Baniaz said:
If ABM is not completing, you have a signal issue. Maybe a loose f plug. If you perform a manual scan, single satellite, how many channels do you get? If less than 850 it is confirmation of a problem.
Click to expand...
hmm... I checked all connections and rescan via ABM it got 197 TV & 12 radio (above settings with Saorview also). It finishes and says done. But there is only the All Bouquet.
 
I had asked about performing a manual scan, I didn't ask about using ABM. If you can answer that, it would help confirm things.

As for ABM, it will make bouquets based on the options you select. Please post details /screenshot of the provider options you set.

Also, are you still in the All services mode or are you in the bouquets mode?
 
Abu Baniaz said:
I had asked about performing a manual scan, I didn't ask about using ABM. If you can answer that, it would help confirm things.
Click to expand...
Ok I will try and do this later, but there is no signal issue.
Abu Baniaz said:
As for ABM, it will make bouquets based on the options you select. Please post details /screenshot of the provider options you set.
Click to expand...
No problem, here's my settings reposted {UPDATED]:
1691505511057.png
Abu Baniaz said:
Also, are you still in the All services mode or are you in the bouquets mode?
Click to expand...
My understanding is that to switch between bouquets you use the < (pqrs) > (wxyz) buttons and for me, there's nothing to change as All is the only one.
But how do I switch between modes?
 
Last edited:
boardtc said:
Ok I will try and do this later, but there is no signal issue.

No problem, here's my settings reposted:
View attachment 92651

My understanding is that to switch between bouquets you use the < (pqrs) > (wxyz) buttons and for me, there's nothing to change as All is the only one.
But how do I switch between modes?
Click to expand...

Press the TV button on remote rather than epg? it should list all bouquets.

Do you have an All Bouquet for each of the three prividers that you have set up?

Have you tried just enabling freesat for example, disable the other two and then run a scan, do you get the full set of bouquets then?
 
boardtc said:
Ok I will try and do this later, but there is no signal issue.

No problem, here's my settings reposted:
View attachment 92651

My understanding is that to switch between bouquets you use the < (pqrs) > (wxyz) buttons and for me, there's nothing to change as All is the only one.
But how do I switch between modes?
Click to expand...
Everywhere on that menu where it asks if you want to create a main bouquet, set it to NO
 
ABM is all or nothing. If 14 providers work and it fails on 15th, it won't write any of them. This is why Willow said to try Freesat only

Please don't press the EPG button. Instead, press Up above OK near the centre of the remote. Then take a screenshot of what you see. Do you then see a Favourites under blue button. If so, press it then take a screenshot. We will see what bouquet you have. Once again, stay off the EPG button for now.

Please don't use ABM for now, perform a manual scan, single satellite scan. Respond back with how many channels you get.
 
grog68 said:
Press the TV button on remote rather than epg? it should list all bouquets.
Click to expand...
Thanks. I have:
1691505750477.png
grog68 said:
Do you have an All Bouquet for each of the three prividers that you have set up?
Click to expand...
Apologies, I used the wrong image in my setup, it's corrected now above, only Freesat and Saorview are enabled.
grog68 said:
Have you tried just enabling freesat for example, disable the other two and then run a scan, do you get the full set of bouquets then?
Click to expand...
From above it looks like I have the bouquets actually! Looking at the WilloBuild pdf the prev < and next > buttons should move between the bouquets but they do not on my Formuler F1:
1691506013135.png
Any thoughts on why the buttons are not working? (The worked fine with my previous GrogBuild)
 
Hi all, I have a couple of Octogon SF8008 boxes which I have updated from Grog to Willobuild, on both versions I run Jedimaker and Xtreamity, when using Jedimaker bouquets on Willobuild after watching for a while (an hour or more) the boxes will just reboot, no issues on Xtreamity or on Grogbuild, anyone else had this?
 
Abu Baniaz said:
Please don't press the EPG button. Instead, press Up above OK near the centre of the remote. Then take a screenshot of what you see. Do you then see a Favourites under blue button. If so, press it then take a screenshot. We will see what bouquet you have. Once again, stay off the EPG button for now.
Click to expand...
This is what I see. The blue button pops up record options....

1691599570430.png
 
Abu Baniaz said:
If ABM is not completing, you have a signal issue. Maybe a loose f plug. If you perform a manual scan, single satellite, how many channels do you get? If less than 850 it is confirmation of a problem.
Click to expand...
Hmmmm....this is what happens. But all the channels come in on the ABM scan...?

1691614808602.png
 
Last edited:
Scanning:
You have to use the remote to select single satellite.

Blue Button:
You must have pressed something else before, that screen. Most probably EPG. Please reread my post.

Anyway, your other post had a picture of the bouquets ABM created. The thing to take away is that if you have an ABM processing failure, it will remove your ABM bouquets (apologies ifsomething has changed and this is no longer the case). If you don't have bouquets, it will show you the all services list.

Hence why I wanted you to do a single satellite scan to establish signal issues.
 
Hi guys I'm using this build on my Octagon STB and in general it's working fine but I have a few questions.
So I have timeshift enabled with 20 seconds and it does seem to work caus if I'm watching a channel and press rewind it will rewind but if I'm watching live and press pause it won't pause I get a cross in the corner but I can then rewind and pause that works.
Any idea how to fix that.
Also everytime the box turns out or restarts I get a log manager error message appear like screenshot.
I've been to log folder and deleted everything there and disabled log manager but it still appears any ideas ?
Thanks
 

Attachments

  • IMG_20230728_063709132.jpg
    IMG_20230728_063709132.jpg
    1.1 MB · Views: 9
You must log in or register to reply here.
Back
Top
Flash Sale Popup