Get the Best IPTV Service
Vu Solo 2 Image upgrade? | Techkings
What's new
By:
Filters

Vu Solo 2 Image upgrade?

S

sullydog

Newbie
Hi
Haven't visited for a few years as my existing setup has served me well since 2017.

I've used my box since about 2015. Initially on Sat.
when most sat connections died i started IPTV with mixed results, until i found a decent supplier via this site.
Support has always been spot on, so i dont feel the need to look elsewhere.

I have always used Openvix and until recently I was running 5.4.009 I noticed that i could not update/delete any of the plugins
I upgraded to 6.2. 011
Flashed as i always have done using the methods i learnt from this site.

Everything seemed ok , until i loaded my IPTV app via PUTTY.

Everything appeared to load correctly as it always has

I can see all available Freesat channels, i can display the various IPTV sections, LIVE EVENTS , UK News etc but if i enter a section it just displays a list of channel numbers and N/A after each channel number.

Has anyone had a similar issue?

It was suggested that i try a different image such as OpenITV ?

Not sure where i get this from? Is method of Flashing the same? Recommended version?

Can someone hold my hand please? LOL

cheers
 
Might help if we knew what putty was installing to determine why the bouquets appears empty.

OpenATV image if you decided to go that way and yes via usb.

DOWNLOAD
 
Last edited:
sullydog said:
Hi
Haven't visited for a few years as my existing setup has served me well since 2017.

I've used my box since about 2015. Initially on Sat.
when most sat connections died i started IPTV with mixed results, until i found a decent supplier via this site.
Support has always been spot on, so i dont feel the need to look elsewhere.

I have always used Openvix and until recently I was running 5.4.009 I noticed that i could not update/delete any of the plugins
I upgraded to 6.2. 011
Flashed as i always have done using the methods i learnt from this site.

Everything seemed ok , until i loaded my IPTV app via PUTTY.

Everything appeared to load correctly as it always has

I can see all available Freesat channels, i can display the various IPTV sections, LIVE EVENTS , UK News etc but if i enter a section it just displays a list of channel numbers and N/A after each channel number.

Has anyone had a similar issue?

It was suggested that i try a different image such as OpenITV ?

Not sure where i get this from? Is method of Flashing the same? Recommended version?

Can someone hold my hand please? LOL

cheers
Click to expand...
I think openvix 6.2 uses python3 and if the plugin you are installing is XE you will require the python3 version as python2 version won't work on py3, use this command in putty for py3 version

wget -O /tmp/install.sh "http://xeev.net/files/ipk/install3.sh" && chmod 755 /tmp/install.sh && /tmp/install.sh
 
sullydog said:
I have always used Openvix and until recently I was running 5.4.009 I noticed that i could not update/delete any of the plugins
I upgraded to 6.2. 011
Flashed as i always have done using the methods i learnt from this site.
Click to expand...
Are you using servicetype 5001 or 5002? If you are install serviceapp from plugins, system plugins and reboot box and check if the channels show
 
dsayers2014 said:
Are you using servicetype 5001 or 5002? If you are install serviceapp from plugins, system plugins and reboot box and check if the channels show
Click to expand...
Hi 5002 as per my setup instructions from provider.

ill try serviceapp plugin before i try image change thanks
 
sullydog said:
Hi 5002 as per my setup instructions from provider.

ill try serviceapp plugin before i try image change thanks
Click to expand...
If you use XE for IPTV you have to install py3 version on that image of openvix
If you pasted the old command line into Putty it won't work
 
pabloescaban said:
I think openvix 6.2 uses python3 and if the plugin you are installing is XE you will require the python3 version as python2 version won't work on py3, use this command in putty for py3 version

wget -O /tmp/install.sh "http://xeev.net/files/ipk/install3.sh" && chmod 755 /tmp/install.sh && /tmp/install.sh
Click to expand...
Hi and thanks for replying
are you saying i could try the above link to install the XE app or this what i use if i get a Py3 version?

Sorry for lack of understanding.

Cheers
 
sullydog said:
Hi and thanks for replying
are you saying i could try the above link to install the XE app or this what i use if i get a Py3 version?

Sorry for lack of understanding.

Cheers
Click to expand...
The new Vix image you have flashed will not run the old version of XE you tried to install.

You may have to remove the existing XE first then reboot and use putty to install the py3 version via command line I sent earlier
 
dsayers2014 said:
Serviceapp needs to be installed on any image using 5001/5002.

No need to do anything just install serviceapp and reboot box
Click to expand...
Hi Found and tried serviceapp
no difference to my setup.
as an aside, i've been using the same app since 2017, and i have never had to install any other app after installing with PUTTY
Cheers
 
pabloescaban said:
The new Vix image you have flashed will not run the old version of XE you tried to install.

You may have to remove the existing XE first then reboot and use putty to install the py3 version via command line I sent earlier
Click to expand...
Ahhh, now i understand.
I'll give it a whirl this evening.
Thanks for your input, all appreciated. Thanks
 
sullydog said:
Hi Found and tried serviceapp
no difference to my setup.
as an aside, i've been using the same app since 2017, and i have never had to install any other app after installing with PUTTY
Cheers
Click to expand...
The plugin still works on older images, you have put a new image on the box, which means you have to use the newer plugin
 
Looking at your providers script it looks like a modified e2m3ubouquet plugin and they have a py3 check in the script so it looks compatible. Double check with your provider it is py3 compatible
 
..... and it will remain reliable if you stick to ATV 6.4.
Most other images are now python 3 and the plugin author would have to update it to be python 3 compliant if you want a more modern image.

I know the ViX Team have got rid of python 2 altogether now, don't know about OpenPli.
 
Willo3092 said:
..... and it will remain reliable if you stick to ATV 6.4.
Most other images are now python 3 and the plugin author would have to update it to be python 3 compliant if you want a more modern image.

I know the ViX Team have got rid of python 2 altogether now, don't know about OpenPli.
Click to expand...
So there's no older versions of Vix that use python2?

The op was on Vix 5.4 and upgraded to 6.2.

@sullydog if no Vix images utilise py2 you'll have to install openatv 6.4, not v7 otherwise you'll be back in the same boat
 
Willo3092 said:
..... and it will remain reliable if you stick to ATV 6.4.
Most other images are now python 3 and the plugin author would have to update it to be python 3 compliant if you want a more modern image.

I know the ViX Team have got rid of python 2 altogether now, don't know about OpenPli.
Click to expand...
Thanks Willo, in the middle of loading it now. Few things different than Vix, but im sure i'll get around them. If not i know i can get help

pabloescaban said:
So there's no older versions of Vix that use python2?

The op was on Vix 5.4 and upgraded to 6.2.

@sullydog if no Vix images utilise py2 you'll have to install openatv 6.4, not v7 otherwise you'll be back in the same boat
Click to expand...
I havent found anything higher than 5.4 I checked World of Sat lists and i can only find 6. Nothing in the archives
So ive started to install ATV.

Ill let you know how i get on
cheers
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup