The Latest And Easiest Wii Softmod Yet - (Jan 2012)
If your Wii is on 4.3, you can use any of the game save methods (Indiana Jones Lego, Super Smash Bros. Brawl, etc.) to install the Homebrew Channel, or you can use this new method called Letterbomb. This is probably the easiest method by far to install the Homebrew Channel.
What you need to do is go to this website >>> LetterBomb
1. Tick the Wii version that you have (U for USA, E for Europe, J for Japan, K for Korea)
2. Enter your MAC Address, you can find your MAC address by clicking on the Wii options on the main screen, then Wii settings, then Internet, then console information.
3. Type in the catchpa words, then click either “Cut the red wire”, OR “cut the blue wire” and a zip file will be downloaded to wherever files are downloaded to.
Put these files onto the root of an SD card, insert into your Wii, click on the messages board, go to yesterday, open the message and bobs your uncle, it will install the homebrew channel.
Here is a video that shows how easy it is done.
[video=youtube;12jctaJlQdM]http://www.youtube.com/watch?v=12jctaJlQdM[/video]
Go to “NAND and Keys Backup”
There are two packs contained in this download.
Pack 1 Contains Bannerbomb and hackmii installer, We will start here.
If your Wii has 4.1 or 4.2
Instructions :-
Format SD card and copy contents of pack 1 to sd root.
Press the SD icon on the Wii and then insert the sd card
(important not to insert SD card first)
LoadBoot Elf appear,press yes
Install homebrew and bootmii (As both Boot2 and IOS, if possible).
If the Wii freezes, try another Bannerbomb version from the “Bannerbomb Versions” folder.
If your Wii has below 4.1 firmware
Instructions:-
Format SD card and copy contents of pack 1 to sd root.
Click on the circle that says “Wii” on the bottom left of the screen, then choose Data Management, then choose Wii Channels, then choose SD Card tab, insert SD Card to Wii.
LoadBoot Elf appear,press yes
A disclaimer will appear and after a short period of time it will say press 1 to install,
Install homebrew channel and bootmii as ios or boot 2 is preferable if that option is available.
If the Wii freezes, try another Bannerbomb version from the “Bannerbomb Versions” folder.
Your wii will now have Homebrew
Now we are going to make a nand backup
Launch Homebrew channel and press start,when in homebrew press the home button on the wiimote,a menu will appear and you are looking to launch bootmii,when you do this you will only be able to navigate bootmii with the buttons on the wii(power and reset)
Use the power button to go to the left to the symbol that looks like a cog and press reset,now you have another screen,stay on the first one which is the nand to sd card and press reset,now the nand is being copied to the sd card,this will take some time,when finished press any button to exit and you will be back to a menu screen,go to the far left to the back arrow using the power button and then press reset,you will be back to the main bootmii menu,press reset on the wii symbol and your back to your wiis system menu.
Now take out the sd card,on the computer delete the private folder and the boot elf file,save the rest of the files in a folder named whatever you want except bootmii,i usualy name it Old bootmii files do not delete.You can save this to your computer for safe keeping and incase we need to roll back the wii.
To avoid your Wii being updated by Discs or via the internet it is recommended that you install PriiLoader, I have written a Tutorial, Access it by clicking HERE
Pack 2 Contains IOS236 installer, and d2x CIOS INSTALLER V8.0
I would recommend a network install on all of these to have most up to date versions and avoid compatibility issues (which is why your Wii has to be connected to the internet). If you wish to install the wads, you will have to get them yourself.
INSTRUCTIONS:-
Format your SD card, copy the contents of pack 2 to the root
First we will install IOS 236.
Open Homebrew channel
Select ios 236 installer
Read start up messages and press 1(wait for it to ask you to press 1 or you will have to restart)
Select network install(download from nus)
Read step 2 to make choice
1-play pirated games
2-only homebrew applications
* One would hope that you would be pushing "2" as this is a tutorial for non-pirates that want to use USB Loaders responsibly.(it may also offer you the same options but ask for "A" or "B")
Instructions:
Online Install
- Load the HBC and load the d2x installer
- Select IOS 236 to use during the instllation
- Select cIOS to install <D2X v8>
- Select base IOS i.e <56>
- Select cIOS slot i.e <249>
- Press A to install
Remeber to Do the same for IOS250 but with base 57
Offline Install
For offline install you will need to download the IOS's you'll use as bases. You can download from here
This pack contains:
IOS37 v5662
IOS38 v4123
IOS53 v5662
IOS55 v5662
IOS56 v5661
IOS57 v5918
IOS58 v6175
After downloading move the wad files to the root of the SD/USB
- Insert the SD or USB in the Wii
- Load the HBC and load the d2x installer
- Select IOS36 or 236 to use during the installation
- Select cIOS to install i.e <D2X v6>
- Select base IOS i.e <56>
- Select cIOS slot i.e <249>
- Press A to install
As Always, Thanks go to Sinno Who told me what to add to make a softmod easier, all I claim gratitude for is typing it and laying it out.
:download:
Wii Should Be Connected To The Internet For This Tutorial
FOR 4.3 ONLY
Download this>> CLICK HERE, but you only need pack 2 from it, disgard pack 1.If your Wii is on 4.3, you can use any of the game save methods (Indiana Jones Lego, Super Smash Bros. Brawl, etc.) to install the Homebrew Channel, or you can use this new method called Letterbomb. This is probably the easiest method by far to install the Homebrew Channel.
What you need to do is go to this website >>> LetterBomb
1. Tick the Wii version that you have (U for USA, E for Europe, J for Japan, K for Korea)
2. Enter your MAC Address, you can find your MAC address by clicking on the Wii options on the main screen, then Wii settings, then Internet, then console information.
3. Type in the catchpa words, then click either “Cut the red wire”, OR “cut the blue wire” and a zip file will be downloaded to wherever files are downloaded to.
Put these files onto the root of an SD card, insert into your Wii, click on the messages board, go to yesterday, open the message and bobs your uncle, it will install the homebrew channel.
Here is a video that shows how easy it is done.
[video=youtube;12jctaJlQdM]http://www.youtube.com/watch?v=12jctaJlQdM[/video]
Go to “NAND and Keys Backup”
4.2 OR BELOW
Download the Softmod from HEREThere are two packs contained in this download.
Pack 1 Contains Bannerbomb and hackmii installer, We will start here.
If your Wii has 4.1 or 4.2
Instructions :-
Format SD card and copy contents of pack 1 to sd root.
Press the SD icon on the Wii and then insert the sd card
(important not to insert SD card first)
LoadBoot Elf appear,press yes
Install homebrew and bootmii (As both Boot2 and IOS, if possible).
If the Wii freezes, try another Bannerbomb version from the “Bannerbomb Versions” folder.
If your Wii has below 4.1 firmware
Instructions:-
Format SD card and copy contents of pack 1 to sd root.
Click on the circle that says “Wii” on the bottom left of the screen, then choose Data Management, then choose Wii Channels, then choose SD Card tab, insert SD Card to Wii.
LoadBoot Elf appear,press yes
A disclaimer will appear and after a short period of time it will say press 1 to install,
Install homebrew channel and bootmii as ios or boot 2 is preferable if that option is available.
If the Wii freezes, try another Bannerbomb version from the “Bannerbomb Versions” folder.
NAND and Keys Backup
When that is done exit out of the hackmiiYour wii will now have Homebrew
Now we are going to make a nand backup
Launch Homebrew channel and press start,when in homebrew press the home button on the wiimote,a menu will appear and you are looking to launch bootmii,when you do this you will only be able to navigate bootmii with the buttons on the wii(power and reset)
Use the power button to go to the left to the symbol that looks like a cog and press reset,now you have another screen,stay on the first one which is the nand to sd card and press reset,now the nand is being copied to the sd card,this will take some time,when finished press any button to exit and you will be back to a menu screen,go to the far left to the back arrow using the power button and then press reset,you will be back to the main bootmii menu,press reset on the wii symbol and your back to your wiis system menu.
Now take out the sd card,on the computer delete the private folder and the boot elf file,save the rest of the files in a folder named whatever you want except bootmii,i usualy name it Old bootmii files do not delete.You can save this to your computer for safe keeping and incase we need to roll back the wii.
Install PriiLoader
To avoid your Wii being updated by Discs or via the internet it is recommended that you install PriiLoader, I have written a Tutorial, Access it by clicking HERE
INSTALL IOS 236
Pack 2 Contains IOS236 installer, and d2x CIOS INSTALLER V8.0
I would recommend a network install on all of these to have most up to date versions and avoid compatibility issues (which is why your Wii has to be connected to the internet). If you wish to install the wads, you will have to get them yourself.
INSTRUCTIONS:-
Format your SD card, copy the contents of pack 2 to the root
First we will install IOS 236.
Open Homebrew channel
Select ios 236 installer
Read start up messages and press 1(wait for it to ask you to press 1 or you will have to restart)
Select network install(download from nus)
Read step 2 to make choice
1-play pirated games
2-only homebrew applications
* One would hope that you would be pushing "2" as this is a tutorial for non-pirates that want to use USB Loaders responsibly.(it may also offer you the same options but ask for "A" or "B")
d2x CIOS INSTALLER V8.0
Instructions:
Online Install
- Load the HBC and load the d2x installer
- Select IOS 236 to use during the instllation
- Select cIOS to install <D2X v8>
- Select base IOS i.e <56>
- Select cIOS slot i.e <249>
- Press A to install
Remeber to Do the same for IOS250 but with base 57
Offline Install
For offline install you will need to download the IOS's you'll use as bases. You can download from here
This pack contains:
IOS37 v5662
IOS38 v4123
IOS53 v5662
IOS55 v5662
IOS56 v5661
IOS57 v5918
IOS58 v6175
After downloading move the wad files to the root of the SD/USB
- Insert the SD or USB in the Wii
- Load the HBC and load the d2x installer
- Select IOS36 or 236 to use during the installation
- Select cIOS to install i.e <D2X v6>
- Select base IOS i.e <56>
- Select cIOS slot i.e <249>
- Press A to install
As Always, Thanks go to Sinno Who told me what to add to make a softmod easier, all I claim gratitude for is typing it and laying it out.
:download:
Last edited: