Connect all cables.
LNB cable to LNB in
HDMI or Scart connected between the TV and the spiderbox
Network cable connected. One end to the spiderbox and the other to a suitable router.
Turn it on There IS a switch at the back.
press the power switch in your remote control to turn it on.
Press the menu button.
Select the Installation section by scrolling right/left
Go to motor setup, press OK
Enter pin code "0000"
Press the green button to allow you to enter your longitude and latitude.
Longituse is switched between E & W by pressing the < and > buttons.
Enter your longitude by using the number keys. Note: if your Longitude is 1.5W (for example) you must enter 001.5W in this field.
Enter your latitude, e,g, 55.6N. You can change N to S with the arrow keys too, but most of you won't want to do that.
Scroll down to save and press OK.
************************************************** **
Apply a patch:
_______________
Get a USB stick.
Download a patch if you have not requested, or do not want the gift channels
For a patch with the gift channels, download non gift patch:
[
EXTRACT the file (*.uad) from the rar file and copy it to your USB stick.
You must extract the file using winzip or winrar or a similar program as the rar file on a USB stick will not be of any use to you.
Insert the USB stick into one of the USB ports in your spiderbox.
Go to the Accessory Section of the menu and select USB.
Scroll to the .uad file you have copied there and press OK
In the popup window, select S/W Update
Wait for your box to load the patch.. DO NOT POWER OFF
The box will reboot by itself with the new patch installed.
=================================
Apply a settings list
