Get the Best IPTV Service
OSCam issues | Techkings
What's new
By:
Filters

OSCam issues

D

darcyyy97

Newbie
Hi, I previously had this issue with running n-lines, however I changed to cws - lines and had no issues until today.

Before when I was running N-Lines via the newcamd protocol on Oscam viewing was okay but recording programmes sent the log in a spiral of "not found"s' That's when I tried running mgcamd. I kept the protocol as newcamd and only had to change the server port. It then ran perfectly. However today I noticed slight freezing, But there were no issues in the log ie "not found" etc. So I just presumed I may need to purchase a new splitter or check cabling at some point. The issue later progressed to full on freezing, upon checking the log I have found an accumulation of errors..

I plugged in my zgemma, and it ran perfectly. I know from having a conversation with another member that my provider supports oscam as we share the same server, and his works fine.

ANY IDEAS ?!?

(VU+ Uno4k) - Wired Ethernet - OpenATV 6.1 - (oscam_atv1.2 11353)

Have not tried VIX yet but, I can't see how a different image would change anything.

I have not tinkered with OScam, I have just simply tried every [reader] combination on here.
  • 2018/04/02 23:33:54 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:6FEED29A90C320AEE108FD06BDD3EDEE): found (71 ms) by TV2 (P/2/2/2) - ITV HD
  • 2018/04/02 23:33:59 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:E27D77D5BC58C9E301F3B4420351279C): found (2243 ms) by TV2 (P/2/2/2) - ITV HD
  • 2018/04/02 23:34:09 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:541BE3801C8D267B147B154E61CD2F76): found (2187 ms) by TV2 (P/2/2/2) - ITV HD
  • 2018/04/02 23:34:18 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:36B7CEF68F0DCAB1DAEDDD6DF8E2B7BB): found (889 ms) by TV2 (P/2/2/2) - ITV HD
  • 2018/04/02 23:34:28 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:5B79C549280992137856075110471D22): found (990 ms) by TV2 (P/2/2/2) - ITV HD
  • 2018/04/02 23:34:38 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:CFE0F49694C78CB9871F48440BAE6F31): found (900 ms) by TV2 (P/2/2/2) - ITV HD
  • 2018/04/02 23:34:49 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:5A5E9D031D81B60A668CB40A60E2C7A0): found (1930 ms) by TV1 (P/2/2/2) - ITV HD
  • 2018/04/02 23:34:58 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:CDA7C9703FFF1B03D7479CF6E5DB611C): found (861 ms) by TV1 (P/2/2/2) - ITV HD
  • 2018/04/02 23:35:10 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:88E36BC586C17EDA2536071AF650BCB3): not found (3612 ms) by TV1 (F/2/2/2) - ITV HD
  • 2018/04/02 23:35:11 679494AB c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1850 PROVID 000000 ECMPID 1B1B ANY CHID PMTPID 0026 VPID 0199
  • 2018/04/02 23:35:11 679494AB c (ecm) dvbapiau (1850@000000/0000/28A4/B7:grin:D7680A35EDBBB3D2B61100124AF3ECB): not found (66 ms) by TV1 (F/2/2/2) - ITV HD
  • 2018/04/02 23:35:12 679494AB c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 2 enabled and 0 disabled ecmpids!
  • 2018/04/02 23:35:12 679494AB c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 153F ANY CHID PMTPID 0026 VPID 0199
  • 2018/04/02 23:35:12 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:88E36BC586C17EDA2536071AF650BCB3): not found (1 ms) by TV2 (F/2/2/2) - ITV HD
  • 2018/04/02 23:35:13 679494AB c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1850 PROVID 000000 ECMPID 1B1B ANY CHID PMTPID 0026 VPID 0199
  • 2018/04/02 23:35:13 679494AB c (ecm) dvbapiau (1850@000000/0000/28A4/B7:grin:D7680A35EDBBB3D2B61100124AF3ECB): not found (1 ms) by TV2 (F/2/2/2) - ITV HD
  • 2018/04/02 23:35:14 679494AB c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 2 enabled and 0 disabled ecmpids!
  • 2018/04/02 23:35:14 679494AB c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 153F ANY CHID PMTPID 0026 VPID 0199
  • 2018/04/02 23:35:15 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:88E36BC586C17EDA2536071AF650BCB3): found (1066 ms) by TV1 (P/2/2/2) - ITV HD
  • 2018/04/02 23:35:18 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:72A0072C845B6B970E7C7C42B7A973B3): found (1394 ms) by TV1 (P/2/2/2) - ITV HD
  • 2018/04/02 23:35:28 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:8AAB88E606461CDA431846CC7D5B32BF): found (1479 ms) by TV2 (P/2/2/2) - ITV HD
  • 2018/04/02 23:35:38 679494AB c (ecm) dvbapiau (1841@000000/0000/28A4/89:6C65994CF8A09D9973DC40D7F8E7A32A): found (909 ms) by TV2 (P/2/2/2) - ITV HD
 
Funny my provider is having trouble with ITV HD, glitching all the time. We could be on the same server/provider I guess, but just to let you know you’re not alone! :(y):
 
What I mean is, if the channel is freezing, it won't matter which softcam you use, unless you suspect the softcam itself is corrupt.
If the softcams are fine and it's freezing using any of them, it's freezing and it makes no difference.
If it's freezing for you but not someone else on the same serer, it'll be your equipment, either splitter or cabling
 
pabloescaban said:
What I mean is, if the channel is freezing, it won't matter which softcam you use, unless you suspect the softcam itself is corrupt.
If the softcams are fine and it's freezing using any of them, it's freezing and it makes no difference.
If it's freezing for you but not someone else on the same serer, it'll be your equipment, either splitter or cabling
Click to expand...
I know It's not the channel because my zgemma works fine from the same server. Just on my OScam box It doesn't do so fine...
 
ok, the problem may be in the way you are tinkering with the lines prior to converting them to oscam, a newcam N line, not a CWS line which you started with was working, why did you try to use a CWS line converted to newcam line? - by using a converted line you've probably corrupted something.
If you convert a CWS line to a newcam, you'd have been as well leaving the original newcam line in
 
pabloescaban said:
ok, the problem may be in the way you are tinkering with the lines prior to converting them to oscam, a newcam N line, not a CWS line which you started with was working, why did you try to use a CWS line converted to newcam line? - by using a converted line you've probably corrupted something.
If you convert a CWS line to a newcam, you'd have been as well leaving the original newcam line in
Click to expand...
I started with N lines, and it froze constantly... So I tried mgcamd and it worked fine. One of my servers was down yesterday so I only had 2 on my box and for whatever reason since is been back up today, All has been fine since 8pm. However my other 2 worked fine on my zgemma. So that's where I was beginning to get frustrated.
 
ok but you really need to give more information in the first instance - you never said in your OP that you had several lines running through the oscam server file.
Have you tried other Newcam lines/ Ccam lines from other providers to see if the oscam behaves any better?

FWIW I don't believe CWS/Mgcamd lines are any use in an oscam file
 
pabloescaban said:
FWIW I don't believe CWS/Mgcamd lines are any use in an oscam file
Click to expand...
I have my cws/mgcamd lines in oscam.server file, one one of my machines I have no choice as mgcamd isn't available and have to use oscam anyway but now I use oscam format on all my boxes.
 
You must log in or register to reply here.
Back
Top
Flash Sale Popup