dangerous
TK Veteran
With all the newer receivers now only taking oscam and the shenanigans lately with audio issues / mgcamd I thought I would bring this thread back to life.
I can't take the credit for this guide as gmangt4 is the original author but I've just updated it.
If you require a softcam feed ipk file, check the downloads section as I've posted a link there.
Install oscam_atv 1.2 11353 from the softcam feed in plugins or by whatever means you use to install cams.
Bring up softcam manager once oscam is downloaded and make cam 1 oscam_1.2 11353 no other cam to be selected, so only one cam running. MAKE SURE YOU STOP ALL OTHER RUNNING CAMS, now restart oscam via softcam manager, it should restart without error if applied ok and will show as active. It must be restarted to allow access to the webinterface.
When oscam is restarted go to computer and enter your box ip address into your chosen browser address bar followed by :83 that's full colon not semi, so something like 192.168.0.3:83
press enter or go whatever your browser needs to go to the address.
Oscam web interface should appear.. if it don't appear try rebooting your box and/or router....and try again..make sure ip address of box has not changed...this can be found in menu, information, network
Now at the top of the oscam web interface look for the tab/word "Files", click this and then a sub menu will appear below the main menu, click on "oscam.server" in here you will see examples, delete these examples and you can use the 2 reader examples i've pasted below for N: lines, edit them with your details and paste in to the oscam.server page. There's a comma between the server address and port, this must remain, be careful not to delete by accident
Once you've edited it with your details scroll to the bottom of the page and select save, then scroll to the top and select restart tab on top right of page, then on the pop up press restart, wait 10 secs and try and see if channels clear.
On the oscam web interface the live log tab will update every 8 secs with your ECM's if your interested. It will also tell you if something wrong like wrong password, etc
For an example of how to enter our line, here's an example
CWS = your.server.com port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
or
N: your.server.com port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
I hope this helps.
[reader]
label = TV1
protocol = newcamd
device = your.server.com,port
key = 0102030405060708091011121314
user = username
password = password
group = 1
[reader]
label = TV2
protocol = newcamd
device = your.server.com,port
key = 0102030405060708091011121314
user = username
password = password
group = 1
For installing oscam into openvix see downloads section for config file.
I can't take the credit for this guide as gmangt4 is the original author but I've just updated it.
If you require a softcam feed ipk file, check the downloads section as I've posted a link there.
Install oscam_atv 1.2 11353 from the softcam feed in plugins or by whatever means you use to install cams.
Bring up softcam manager once oscam is downloaded and make cam 1 oscam_1.2 11353 no other cam to be selected, so only one cam running. MAKE SURE YOU STOP ALL OTHER RUNNING CAMS, now restart oscam via softcam manager, it should restart without error if applied ok and will show as active. It must be restarted to allow access to the webinterface.
When oscam is restarted go to computer and enter your box ip address into your chosen browser address bar followed by :83 that's full colon not semi, so something like 192.168.0.3:83
press enter or go whatever your browser needs to go to the address.
Oscam web interface should appear.. if it don't appear try rebooting your box and/or router....and try again..make sure ip address of box has not changed...this can be found in menu, information, network
Now at the top of the oscam web interface look for the tab/word "Files", click this and then a sub menu will appear below the main menu, click on "oscam.server" in here you will see examples, delete these examples and you can use the 2 reader examples i've pasted below for N: lines, edit them with your details and paste in to the oscam.server page. There's a comma between the server address and port, this must remain, be careful not to delete by accident
Once you've edited it with your details scroll to the bottom of the page and select save, then scroll to the top and select restart tab on top right of page, then on the pop up press restart, wait 10 secs and try and see if channels clear.
On the oscam web interface the live log tab will update every 8 secs with your ECM's if your interested. It will also tell you if something wrong like wrong password, etc
For an example of how to enter our line, here's an example
CWS = your.server.com port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
or
N: your.server.com port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
I hope this helps.
[reader]
label = TV1
protocol = newcamd
device = your.server.com,port
key = 0102030405060708091011121314
user = username
password = password
group = 1
[reader]
label = TV2
protocol = newcamd
device = your.server.com,port
key = 0102030405060708091011121314
user = username
password = password
group = 1
For installing oscam into openvix see downloads section for config file.
Last edited:
