openbox v9s

[bigc26]

hi guys sorry if there is already a thread but had a look and could not see one .

im after some help on the v9s when you press 6666 and the camds setup there is a option there for IPTV

when you go into this it says stalker at the top then shows

host name -- im putting my http:// in here from my server
username user name is my login from my sever
password from my server
mac address the one from the box ?


then i log into my server website and lock the mac code in. when i press enter all i get is connected then it says channel fail and im not getting any further

instructions ive been giving so far is

MAG / BLADE / SMART STB / STALKER PORTALS
ensure you have enabled IS_MAG and added your devices mac address
add the portal url as http://blahblahblah on your box and reload portal
you now have our channels with full EPG

which i have done but no further forward. all the videos i am finding online are showing it working on the v9s but i cannot seem a step by step to show me how to get it all working if anyone has would be much appreciated


thanks in advance

 

[gaosphappy]

http://www.techkings.org/index.php?threads/126505/

There is a user guide here that talks about stalker. Hope it helps

Good luck

Sent from my Redmi Note 4 using Tapatalk

 

[steveyju]

hi guys sorry if there is already a thread but had a look and could not see one .

im after some help on the v9s when you press 6666 and the camds setup there is a option there for IPTV

when you go into this it says stalker at the top then shows

host name -- im putting my http:// in here from my server
username user name is my login from my sever
password from my server
mac address the one from the box ?


then i log into my server website and lock the mac code in. when i press enter all i get is connected then it says channel fail and im not getting any further

instructions ive been giving so far is

MAG / BLADE / SMART STB / STALKER PORTALS
ensure you have enabled IS_MAG and added your devices mac address
add the portal url as http://blahblahblah on your box and reload portal
you now have our channels with full EPG

which i have done but no further forward. all the videos i am finding online are showing it working on the v9s but i cannot seem a step by step to show me how to get it all working if anyone has would be much appreciated


thanks in advance

 

[steveyju]

Hi
To get IPTV working on V9S you need a working M3U IPTV subscription. Open the M3U file from your provider and transfer it to a USB stick naming it tvlist only do not put M3U after it or it will not work but make sure the file name is M3U. Turn off the V9S and plug the stick in the USB socket turn it back on and navigate to Network App then select Free IPTV and it should then show the channels select any to play. Worked for me yesterday hope it helps