OK that's a Cline and must be entered in CCcam.
So you have your line---it sometimes comes as a ready made file or as a line of code.
If in fileform then you need to format a USB key to FAT32 via your PC and insert the file into the USB root.
If a line of code then put onto notepad and name as CCcam.cfg then save as ALL file. Now do as above and install on USB.
Now insert USB key into rear of box.
CLINE INSTALLATION
1: Go to main menu
2: Select Network
3: Select "CCcam Client Setup"
4: Select 'Update files by usb'
5: In new window, highlight 'CCcam.cfg', press green button on remote (ADD). This will place a tick by it, then press yellow button on remote (READ)
6: Once finished, select 'Manage Config Files' and on new window select cccam.cfg again
7: A new page comes up with your cline on it, press green button on remote to make it active (tick should appear by it) Exit out of all menus to tv and reboot box, select a pay channel.. it should clear, if not go back into menu, select Network, then 'Network Setup', and turn DHCP on and then click apply..
8: If channel still doesn't clear, reboot box and router by unplugging both from power and plugging back in (router first)
channel should now be showing---if not then you have either a dodgy line or a dodgy box---try another test line --if no go then return box as faulty.
Reaper.
