This is not a softcam control panel, It just allows you to install softcams from the plugin server.
The softcam control methods in OpenATV changed. If you have an image that is older than 03 May 2019, update or flash a newer one first.
How to install the secret/softcam feed
Option A:
(Part quote of Spacerat)
The easiest method of getting a shell session to the box is the "Terminal" in OpenWebif, but feel free to use puTTy or whatever you already use.
That one-liner makes sure you get the latest version of the feed for your actual image version and architecture.
No need to download the IPK, copy it to the box and installing it through GUI or shell when using the one-liner but you are still free to use an IPK, if you insist on it.
Use version 4.3r2 or later in that case.
The new feed supports OpenATV 5.3 through 6.3, that is "the last 5 versions of OpenATV".
wget -O - -q http://updates.mynonpublic.com/oea/feed | bash
Option B:
Download the attachment
Unzip/unrar the file so that you have the ipk file
Transfer the ipk to /tmp directory on receiver
On receiver, press
Blue > Plugins > IPK Installer > OK
Select /tmp/ and press OK to install extensions
List of ipks will be shown. Select the one you want, ensure it has a tick by pressing OK, then press Green to install
Option C:
Download the attachment
Unzip/unrar the file so that you have the ipk file
Transfer the ipk to your USB device
Ensure that no menus are showing on TV
Insert USB stick, you will be prompted to install ipks
List of ipks will be shown. Select the one you want, ensure it has a tick by pressing OK, then press Green to install
Stage 2: install softcams
Once you install the softcam feed, restart the receiver.
To install softcams:
Menu > Plugins > Green (download plugins) > scroll to softcams and press OK> Select the one you want and complete installation
Stage 3: Edit/transfer your config files
mgcamd in /usr/keys
CCcam in /etc
OsCam in /etc/tuxbox/config/oscam-xxxx
Stage 4: Activate/control Softcams
Menu > Setup > Decryption and Parental control > Softcam Setup
Note: The above menu may not show until the receiver is restarted following installation of a softcam. This is because the menu checks for a softcam before it becomes visible.
The softcam control methods in OpenATV changed. If you have an image that is older than 03 May 2019, update or flash a newer one first.
How to install the secret/softcam feed
Option A:
(Part quote of Spacerat)
The easiest method of getting a shell session to the box is the "Terminal" in OpenWebif, but feel free to use puTTy or whatever you already use.
That one-liner makes sure you get the latest version of the feed for your actual image version and architecture.
No need to download the IPK, copy it to the box and installing it through GUI or shell when using the one-liner but you are still free to use an IPK, if you insist on it.
Use version 4.3r2 or later in that case.
The new feed supports OpenATV 5.3 through 6.3, that is "the last 5 versions of OpenATV".
wget -O - -q http://updates.mynonpublic.com/oea/feed | bash
Option B:
Download the attachment
Unzip/unrar the file so that you have the ipk file
Transfer the ipk to /tmp directory on receiver
On receiver, press
Blue > Plugins > IPK Installer > OK
Select /tmp/ and press OK to install extensions
List of ipks will be shown. Select the one you want, ensure it has a tick by pressing OK, then press Green to install
Option C:
Download the attachment
Unzip/unrar the file so that you have the ipk file
Transfer the ipk to your USB device
Ensure that no menus are showing on TV
Insert USB stick, you will be prompted to install ipks
List of ipks will be shown. Select the one you want, ensure it has a tick by pressing OK, then press Green to install
Stage 2: install softcams
Once you install the softcam feed, restart the receiver.
To install softcams:
Menu > Plugins > Green (download plugins) > scroll to softcams and press OK> Select the one you want and complete installation
Stage 3: Edit/transfer your config files
mgcamd in /usr/keys
CCcam in /etc
OsCam in /etc/tuxbox/config/oscam-xxxx
Stage 4: Activate/control Softcams
Menu > Setup > Decryption and Parental control > Softcam Setup
Note: The above menu may not show until the receiver is restarted following installation of a softcam. This is because the menu checks for a softcam before it becomes visible.
