GT-BE98_PRO
RT-BE86U
RT-BE88U3006
RT-BE96U

3006.102.3 (11-Jan-2025)
- NOTE: If flashing on top of Asus stock firmware 3006.102_37000
or greater, then you first need to enable downgrade
capabilities before flashing Asuswrt-Merlin on top
of it. Connect Over SSH, and run the following command:

nvram set DOWNGRADE_CHECK_PASS=1

After that, you can upload Asuswrt-Merlin through
the webui like any regular firmware upgrade.

This is only required when flashing Asuswrt-Merlin
for the first time.

- NOTE: The new GPL codebase changed the way wireless networks
are configured. If you ever revert to an older
firmware, you MUST do a factory default reset following
the firmware downgrade, on both the router and any
existing AiMesh nodes.

- NEW: (re-added) VPN interface selector on the Speedtest page,
to test a VPN tunnel's throughput.
- UPDATED: Merged with GPL 3006.102_37346 (with the wifi firmware
from 37038 for the RT-BE96U and GT-BE98_PRO - was missing
from GPL)
- UPDATED: dropbear to 2024.86.
- CHANGED: VPN public IP retrieval now uses HTTP instead of STUN,
which should be more reliable through a VPN tunnel.
- CHANGED: Model name will be inserted in the filename of JFFS backups.
- CHANGED: Display DHCP leases from other VLANs
- CHANGED: Improved refresh behaviour of the VPN Status page.
- CHANGED: Set rp_filter mode to "loose" on Wireguard client interfaces.
Fixes gettunnelip.sh and onboard speedtest.
- FIXED: webui always redirecting to router hostname for RT-BE86U.
- FIXED: DLNA device icon missing for GT-BE98_PRO
- FIXED: Site Survey page not loading properly
- FIXED: Wireless Log would sometimes display the wrong hostnames
- FIXED: Refresh link not working on OpenVPN/Wireguard client pages.
- FIXED: WireGuard client randomly failing to retrieve public IP for
display on the webui.
- FIXED: Some Guest Networks wouldn't properly list their
connected clients on the Wireless Log page.